This furnace adopts electromagnetic induction smelting, the structure is very simple, does not need to do the foundation. Cooling method can be water cooling or air cooling. The furnace body is tilted by a reducer, which can be tilted manually when power is cut off. The noise meets the environmental protection standard and is less than 60 decibels.
The DIH-1.5KW Induction Heater is designed for quick, efficient and safe heating of metallic parts. Can work with any power source with single phase 110V, 220V or 240V, simple operation and very convenient. Main Descriptions and Advantages Max output 1.5KW, heating steel material more than 800 C temperature within seconds and no need water cooling, and lower consumable cost, with the less weight, easy handling and small carrying handle, one better kind of portable induction heater, no flame, compare to naked fire or LGP flame heating way in the auto repairing workshop, a better way to heat the metallic material, such as bolts, nuts, screws, gears, rod, cases, bearings, driving shafts, pipes, hubs etc. Main Application Manufacture, repair renovation, maintenance,and so on. Heating of tools and parts before hardening, gluing, soldering. Also the workpieces and parts that require heating, such as bolts, rod and profile steel, metallic sheets, bearings, cases, driving shafts, suspensions, nuts, pipes, gears, gear, spring base, shafts, machine and vehicle parts and components, exhausts, pulley boxes, bushings etc. Main Technical Parameter Model No. DIH-1500W Input Power Supply AC 110V,220V,240V,50/60Hz Output Induction Frequency 25-65kHz Max Output Power 1.5kW Power Factor 0.99(PFC) Cooling Way Air Cooling Continuous and Constant Heating Time 6Minutes Plug Cable Length 150CM Output Induction Cable Length 80CM Induction Coils Diameter & Quantity 4PCS Different Diameter Plug Type Type H,Type B,Type G,Type E Induction Main Part Net Weight 2.7KG Dimension 21 9 14CM Induction Heads Part Net Weight 0.5KG Dimension 19 17 6.5CM Total Packing Weight 4.6KG Total Packing Size 41 32 12CM
Main features: 1)Can control the two heating zones individually with two instrument 2)Chamber veined with 12 sets of resistance wire, achieve uniform tem. field and longer constance zone. 3 Equipped with support frame for flange, reduce the load of tube body 4 Pneumatic spring for opening, which is safer for the operator. 5 Open type makes convenient for operation Technical Parameters Power Power rated: 5KW (208-240V) Voltage Voltage rated: AC208-240V 50/60HZ Working Temperature Max. Temperature: 1200 °C Continuous working temperature: 1100 Heating Rate: °C /min Temperature Controller PID automatic control and auto-tune function. 30 programmable segments for precise thermal processing. Built-in protection for the over-heated and broken thermocouple. Length of heating zone 200+200mm Length of constant zone 100+100mm Heating Elements Resistance wire, Fe-Cr-Al Alloy doped by Mo Temperature Accuracy +/- 1 °C Processing tube High quartz tube:25/50/60/80/100*1000mm(optional) Tube blocks are included for blocking heat radiation generated from tube center. Must be fully inserted into the furnace chamber before heating at the correct position. ceramic or quartz blocks are optional Net Weight 40kg Dimensions 590*380*500mm(L*W*H without tube & flange) Vacuum Flange KF25 quick clamp flange Vacuum Pressure 10-1pa can be achieved by a mechanical pump 10-3 pa can be reached by molecular pump Compliance CE Certified
Furnace Oil
Air pre heaters for boilers and heaters
Water Tube Boiler flow diagram
water tube boiler capacity upto 35 tph and 28 kgs pressure 2
Water tube boiler capacity upto 35 tph and 28 kgs pressure
Gas and oil burner spares
Gas train for boilers and heaters
High pressure boiler capacity 500 kgs to 6000 kgs for fatty splitting
HRU for boilers and heaters
Thermic fluid heater coils
RS BOILER Capacity: 500 Kg/hr. Type: Tubeless (Vertical). Working Pressure: 7kg/CM2 , 99 psi (max) Construction Code: BBR CODE Fuel: Natural Gas/LPG/CNG /LIGHT OIL Efficiency: 88% (Min)
Main Features ï??Used in Lab as material sintering furnace, annealing furnace, smelting furnace, dental furnace, etc. ï??It is possible to add a vent to be used as Nitrogen protection furnace, Argon protection furnace, Oxidizing furnace, Carbonizing furnace. ï??A general necessary electric furnace for experiment in Lab. Technical Parameters Power ï?·Power rated: 4KW (220V) Voltage ï?·Voltage rated: AC 220V 50/60HZ Furnace structure ï?·High purity fibrous alumina insulation for maximum energy saving - 30% less power consumption than other brands ï?·Double air cooling structure to control furnace surface Temp. no more than 60 when furnace is heated into max. Temp. ï?·The spring door buckle is used to solve the contraction gap caused by high temperature in the chamber of the equipment. ï?·Equipped with inspection window on the front,convenient to to observe the situation inside the chamber Working Temperature ï?·Max. Temperature: 1200 °C ï?·Continuous working temperature: â?¤1100 ï?·Recommended Heating Rate: 5-20°C /min Max. heating rate ï?·30/min Temperature Controller ï?·PID automatic control and auto-tune function. ï?·30 programmable segments for precise thermal processing. ï?·Built-in protection for the over-heated and broken thermocouple. Thermocouple ï?·K type Heating Elements ï?·Fe-Cr-Al Alloy doped by Mo Temperature Accuracy +/- 1 °C Dimensions ï?·Chamber size(L*D*H): 250*300*250mm (18L) Warning ï?·The equipment is not sealed, and can not be put into toxic, harmful, inflammable and explosive gas. Can add the inlet port to pass through the inert gas or oxygen. Compliance ï?·CE Certified
First, the melting furnace type: The melting furnace is a power-saving product, advanced technology, precise and reliable control, mature manufacturing process, safe and stable operation, perfect protection system, reasonable layout, convenient management and maintenance. It has the characteristics of fast melting speed , low energy consumption and stable and reliable operation. Second, the melting furnace composition range: Medium frequency power supply ?? capacitor cabinet ?? furnace body (steel shell or aluminum shell furnace body) ?? tilting furnace system ?? remote control box ?? closed loop cooling tower The melting furnace has protection systems such as overvoltage, overcurrent, water temperature, water pressure, short circuit, grounding, etc. The operation panel has various parameters of the working parameter display screen and the display working state, and there are indications such as fault and temperature.
First, the complete set of equipment: The system includes: an electric furnace 1 .5 t; a 1500 KW SCR frequency power; a rectifier transformer owned 1 600 KVA (10KV / 2 * 750V); a control box furnace convenient operating. A total of one set.
Dished boiler head-boiler head/end china-founded in 2000, dingjin general machinery co., ltd., specialized in the production of dished heads and pressure vessel plates, covering 74, 000 square meters which located in the beautiful costal city dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We possessed 3 sets of spinning units made in germany, self-made df10050, df 2220 and md21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from �325*thk 8 to �10000*thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in china. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (the maximum lifting capacity is 100 tons). Processing size of dish head(end): the max size with integral spinning technology is �10000*50mm; the max size with integral stamping technology is �6000*400mm; there is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: elliptical head china, hemispherical head china, dished heads china, conical head, customized dished ends, tank heads, china oem/odm dished end head.
Asme/ansi stainless steel dish head in gas condenser -founded in 2000, dingjin general machinery co., ltd., specialized in the production of dished heads and pressure vessel plates, covering 74, 000 square meters which located in the beautiful costal city dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We possessed 3 sets of spinning units made in germany, self-made df10050, df 2220 and md21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*thk 8 to 10000*thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in china. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (the maximum lifting capacity is 100 tons). Processing size of dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; there is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: elliptical head china, hemispherical head china, dished heads china, conical head, customized dished ends, tank heads, china oem/odm dished end head.
AMRITA THERMAL EQUIPMENT are the manufacturer of Industrial Ovens in India. As an Industrial oven manufacturer, we have supplied many Industrial Ovens of Various types such as 1.Batch Oven, 2.Tray oven, 3.Trolley Oven, 4.Conveyor Oven, which operate in temperature ranges from 50ºC to 450ºC using electricity, gas, or oil. Applications include pre-heating, drying, curing, heat-treatment and burn-off to name a few. AMRITA make Industrial Oven is of triple wall construction with minimum of metal to metal contact to avoid Heat Bridge in structural design to minimize the conduction of heat emission & reduce energy consumption The Outer casing is made from MS coated with primers & then with 2 coats of enamel or epoxy paint or powder coated, thus giving rust proof & long lasting performance.
