PE-265 is and acrylic pressure-sensitive adhesives. It has high initial tack, and suitable to apply on PVC flooring tiles. 1. Wide-range decorative applications. 2. Domestic constructions. 3. Compatible with PP, PE, PVC to non-woven fabrics or foam products.
1.High solid content 50% 2.Has high transparency,low fluidity and slump 3.Can be extruded easily in winter(about-15°C) 4.Can stick Metal, Timber, Concrete and other building material 5.VOC free versions are also available, using VOC exempted solvent.
APPLICATIONS & CHARACTERISTICS 1. High bonding strength and easy to brush. 2. It can be applied for many materials, such as wood, PU leather, sponge and cloth etc. 3. Water based, green product. PHYSICAL PROPERTIES : 1. AppearanceBeige liquid 2. Main ComponentWater-based neoprene. 3. Solid Content 52± 2% 4. Viscosity 4500 5500 cps (25, LVT) 5. Shelf Life 6 months
1. 365nm UVA tube attract mosquitoes and flies, strong glue board stick and kill insects with high-efficiency. 2. Without high voltage, noise and electric spark, and safe for humans and pets. 3. Power supply: 100-110V / 220-240V AC cable. 4. Light source: 365nm UVA 12W U Type tube. 5. Working range: 100 square meters 6. With glue board storage, easy to replace glue board storage. 7. Included 10pcs sticky and anti-aging glue board, it is durable using. 8. 2 use method: hang on the wall or put it on the table.
BOPP adhesive tape Thickness: 41micron Width*Length: 0.48*100m
Paver lacquer is applied on the surface of pavers to impart a decorative finish and colourful look. This is a high gloss, best quality lacquer coating which provides more coverage area and gives more shine to the surface of pavers. It can be applied on cement concrete block, paver block, decorative tiles and like items. Easy To Use : Forms a hard transparent film over the surface applied. Provides high glossy finish with shine and scratch resistance. Excellent water , dust, alkali and abrasion resistance. Has strong bonding property. Exceptionally high coverage area. Available in packing of 20, 50 ,200 ltrs.
Our new creative School Glue/DIY product- ReposGlu 60g (Repositionable Glue) is a kind of DIY product which could provide permanent bond or temporary bond. It also could be Removable, Repositionable, Re-applicable and it will not damage any decoration. Application: it could be used at office, school, home decoration and any other places where you need. Specification: Non-toxic, Acid Frees, Safe for children, Eco- friendly, RoHS compliant New Weight: 60g/tube Design : Built-in Brush https://www.youtube.com/watch?v=T7EA7WSytoQ (How to use DIY ReposGlu) Welcome to contact us!
we are one of the company producing the wallpaper paste(KOREAPUL). We are exporting our product KOREA PUL to southeast Asia, Canada, and Uzbekistan, and the product' quality is receiving much recognition. Execellent antibacterial properties evaluated by trusted party. Certification of Environmental Building Material NO. HB1300E12-01. National Housing Corporation Papering Glue Test Code- KSF3217 . Made of natural potato starch. Granulated, easily dispersed in water and convenient in storage and delivery. Transparent, clean looking applied glue can be achieved. Chemically stable and wrinkle doesn't occur. I'll be waiting for your reply.
1.Product Name:Glue Stick for Electronic Heat Resistance2.Product Description(1)COMPOSITION:POLYAMIDE RESIN 89%Phosphate Triester 9%Paraffin 2%(2)HS CODE:3506919090(3)Solid Content:100%(4)R&B SOFTENING:150±5(5)OPENING TIME:10~13S(6)Curing Time:8S~10S(7)Brookfield VISCOSITY 150 ...............................9500 CPS160 ...............................8500CPS180 ............................. 6500CPS(8) Certification:SGS Environmental Protection Report ROHS AuthenticationMSDS Safety Report(9 )Initial Adhesion TEST: Steel Ball(10)Packing and shipping:0.5kg/bag20kg/ctnThe package can be customized as your requirement.(11) Usage:Electronic ProductFilter ProductgarmentApplianceAutomotive and Machinery,,Etc.(12)Characteristic:require clean, fresh air, need to exchange gas with outside air, and require air filtration devices, usually Connected to the air conditioning system. The production and assembly of these filter devices require the bonding of hot melt adhesives and the sealing of the goods.(13)Warehouse
1.Product Name:Hot Melt Glue Stick2.Product Description:(1) Usage ElectronicHandcraft ToyCarton packingMetalPlasticBox, .(2)R&B SOFTENING:85 ±5(3)SOLID CONTENT:100%(4)CURING TIME:5~8S(5)OPENING TIME:10~13S(6)BROOKFIELD VISCOSITY:150 .13000CPS160 12500CPS180 ......................................12000CPS(7)Character:high viscosityNon wire drawingCold-resistanceNo loss of viscosity, etc.(8)Certification:SGS Environmental Protection ReportROHS AuthenticationMSDS Safety Report(9) NON-TOXICITYÂ Â (10)Recommended Application Temperature:150-160(11)HS CODE:3506919090(12)OEM:accepted(13)Valid time:1 year(14)Storage:indoor(clean and dry)(15)Packing and shipping:1kg/ctn 2kg/ctn 20kg/ctn 25kg/ctn,The package can be customized as your requirement.Delivery:common specification5days(16)Answers to your doubts(17)About usWe take our customers to visit factory and win customers praise.
1.Product Name:glue stick for perfect binding2.Product Description(2)Solid Content:100%(3)R&B Softening:88±5(4)Opening Time:10~15S(5)Curing TIME:8~10S(6)Brookfield Viscosity:150
Method of use: the usage and the double-sided adhesive paste, 1, first will glue face toward a bonding material A, machine heat 5 seconds, layer glued to your bonding material A; 2, tear off the release paper, then will be affixed with glue A material toward the rubber surface, adhesion B material bonding position, with an electric iron or hot pressing equipment, continuous press 15 seconds, after cooling, adhesive AB two materials permanently live. Note: press temperature and press time is only recommended conditions, and pressing equipment, are bonded material thickness, thermal conductivity, pressure are relations, the user needs to confirm the specific experimental conditions according to the.
Method of use: the usage and the double-sided adhesive paste, 1, first will glue face toward a bonding material A, machine heat 5 seconds, layer glued to your bonding material A; 2, tear off the release paper, then will be affixed with glue A material toward the rubber surface, adhesion B material bonding position, with an electric iron or hot pressing equipment, continuous press 15 seconds, after cooling, adhesive AB two materials permanently live. Note: press temperature and press time is only recommended conditions, and pressing equipment, are bonded material thickness, thermal conductivity, pressure are relations, the user needs to confirm the specific experimental conditions according to the.
Property: Fire-retardant mastic is made from asphalt,polymer,mineral fillers and flame retardant, it is air-tight,waterproof,aging resistant and fire retardant.an ideal foam protection for foam glass and PU foam. Application. Packing: In 30kg each barrel..
The New White Mastic Description "The new White Mastic is a white thick syrupy substance.Its main components are epoxy resin, organic solvent, plasticizers, flame retardants, film forming agent and fillers. It is mainly used as damp barrier for coldinsulation layer and roof buildings. It has all the advantages of asphalt based mastic ,besides it has better formability and wider working temperature range." Material Preparation "DO NOT THIN. Do not use sticks or boards,which would splinter or otherwise contaminate the product.Apply only to clean, dry, oil-free surfaces.Keep container closed when not in use. The new White Mastic cannot apply by spray." Application Outdoor and Heavy Duty Service-Apply a tack coat of The new White Mastic at a thickness of 1.6mm. Smooth membrane to avoid wrinkles and overlap all seams at least 5cm.Apply a finish coat of The new White Mastic at a minimum thickness of 3.2mm.This finish coat shall apply no later than 1 hour after the tack coat and shall completely cover membrane.This application shall zpro vide a mi nimum dry film thickness of 3.0mm. Specification and package 50 kg or 100kg /barrel Storage Store and apply between 4(40) and 38 (100).
Wear-resistant Agent Description Foam glass is a good material for cold insulation,it is high strengh,low thermal conductivity ,low water absorption,humidity resistance,freezing resistance,anti-corrosion and otheradvantages,but the surface of foam glass is breakable .we use wear-resistant agent to prevent the difference in high temperature influence of the enquipment or pipe when foam glass is used in multi-layer cold insulation.you can daub the wear-resistant agent on the foam glass in order to strenghen the wear resistance of it ,reduce the loss of cold energy,meanwhile extend the life time of the equipment. Packing packing: Drum weigh: 25Kg/drum Storage Store in a cool,dry,frost-free place. Normal storage conditions in up to 25 should provide indefinite shelf life.
Application: The main content of tn-1 series one-component adhesive and solvent-free polyurethane adhesive are polyether, additives and flame retardants, they are odorless and non-toxic materials, suitable to be operated at room temperature, suitable for brushing and spraying process, they can be self cured at room temperature, insoluble to solvent and water roof. Packing: 25kg each pail.
FG Cryogenic Adhesive Description FG Cryogenic adhesive is made from mixing and heat treatment of asphalt,polymer and polymer and plasticizers.it has high bonding strength and good anti freezing property.suitable to be used as binder for foam glass and PU at low temperature. Application "Surfaces must be free of moisture,loose scale and rust ,dust,oil and grease.Asphaltic primers,coal tars,siliconers,alkyd or other solvent senitive or thermoplasticprimers or coating should not be used.some acceptable primers are zinc rich,polyester and epoxy,if in doubt,always check surface for adhesion before starting work with a test block ,apply a small block and let cure for a minimum of 24 hours,block should break before adhesive peels from surface. Blocks of insulation material should be checkedfor fit to the substr ate surface before work started.blocks must be reshaped or cut smaller if they do not fit,especially on overhead work. Adhesive may be applied to either or both surfaces,Application to the rougher surface generally gives the best results." Standard Packing Specifications: 20kg bags, 50kg pails.
Method for making the glue(honeycomb-broad core) Process: 1.Water:45kg. 2.Glue powder: 25kg (1 bag), put into the water and mix up. 3.96% caustic, soda1.7-2kg and borax 0.1-0.5kg add into 5-10kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (note: when making the glue, be sure to control the quantity of caustic soda based on the quality of caustic soda.)
Method for making the Glue(honeycomb-broad) Process: 4.Water:25KG. 5.Glue powder: 25KG (1 bag), put into the water and mix up. 6.96% caustic,Soda1.7-2KG and borax 0.1-0.5KG add into 5-10kg water, fully solved, mixing and reacting for 5 ~ 10mins. Then pour the solution into the well mixed glue solution, mixing up during the pouring. (Note: When making the glue, be sure to control the quantity of Caustic Soda based on the quality of Caustic Soda.)
