Features * oxygen pressure range 2 mbar - 3bar * zirconium dioxide (zro2 ) sensing elements * non-consumption technology * integral heating element * no need for temperature stabilisation * no reference gas required * high accuracy * linear output signal * operates with external interface boards Specifications Heater voltage: Porous cap (15mm): 4.35v dc +/- 0.1v dc (1.85a) Stand by: 2v dc (0.85a) Pump resistance @ 700'C: < 6kOhm Permissible gas temperature: -100 to 250C Gas flow rate: 0 to 10 m/s Repetitive permissible acceleration: 5 g Incidental permissible acceleration: 30 g
Dust Sensor Module DSM501B Description Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor. PWM output of the sensor can be directly connected to μ-com to control fan speed or ventilation and also to display the level of particles. Detectable size of particle is limited to minimum 0.7 μm, and the application for smoke or fire alarm is prohibited. Dust Sensor Module DSM501B Type: DSM501A : 2mm pitch connector type (20010WR-05). DSM501B : 2.5mm pitch connector type (S5B-EH). Dust Sensor Module DSM501B Electrical characteristics: Supply voltage: DC5V +/- 10% Power consumption: 90mA Operating temperature range: -10~ +65'C Operating humidity range: 95%RH or less (without dew condensation) Recommend storage condition: -20~ +80'C Dimension: W59 * H45 * D20 (mm) Detectable particle size: approx. 1um (minimum) Detectable range of concentration: 0 ~ 1.4mg/m3 Output signal: PWM (pulse width modulation) Time for stabilization: 1 minute after power turned on Sensor characteristics: To be maintained in between the upper limit and lower limit of the standard dust sensor unit Dust Sensor Module DSM501B Features: * PWM output * Easy installation * Single power supply * Compact size and lightweight Dust Sensor Module DSM501B Application: * Ventilator etc * Air conditioner * Air quality monitor * Air cleaner or Air purifier
MB7389 HRXL-MaxSonar-WRMT High Performance Ultrasonic Precision Rangefinder High Performance Ultrasonic Precision Rangefinder MB7389 Product Description The HRXL-MaxSonar-WRMT ignores smaller targets and only reports the range to target with the largest acoustic return. This is our most advanced weather resistant sensor designed for target detection and ranging outdoors or in tank or bin applications. High Performance Ultrasonic Precision Rangefinder MB7389 Features and Benefits * Factory calibrated beam width * Low operating voltages from 2.7V to 5.5V * All range outputs are active simultaneously * Superior clutter rejection High Performance Ultrasonic Precision Rangefinder MB7389 Applications and Uses * Bin Level Measurement * Tank Level Measurement
Water Leak Detection Sensors are widely used in Telecommunication Outdoor Base Stations, Elevator Shafts, Electric Vehicle Charging Stations and Electric Distributors. When leakage happen in the above equipment and the 2 electrodes of the sensor are immersed in water at the same time, the sensor will trigger the alarm system with which is connected. Application:underground,plant room,etc,used for detecting water leakage. Setup:on ground/wall with screw Detection:Water leakage with LED lamp Materials:Nylon fibre/Alluminium Alloy Origin:China
What's the introduction of Micro Oval Gear Flow Meter ? Micro Oval Gear Low Flow Meter is a kind of oval gear flow meter ,along to positive displacement flow meter. there is thousands of manufacturers who can produce oval gear flow meter. but only several manufacturer who have technology to produce micro liquid flow meter. Micro Oval Gear Flow Meter offer the highest accuracy and measure for various viscosity liquid. special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro Oval Gear Low Flow Meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, Adhesive control ,Hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of Micro Oval Gear Flow Meter? 1) Anti-dust,anti-vibration,anti-corrosive&explosion-proof. 2) Max accuracy up to 0.2% 3) Min flow : 0.1ml/min 4) Max temperature: 200C 5) Max pressure: 1000bar 6) Viscosity liquid:0.3~10000cps.
What's the introduction of Micro Oval Gear Flow Meter ? Micro Oval Gear Low Flow Meter is a kind of oval gear flow meter ,along to positive displacement flow meter. there is thousands of manufacturers who can produce oval gear flow meter. but only several manufacturer who have technology to produce micro liquid flow meter. Micro Oval Gear Flow Meter offer the highest accuracy and measure for various viscosity liquid. special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years. Micro Oval Gear Low Flow Meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, Adhesive control ,Hydraulic life cycle testing, electrolyte dosing, natural gas odorization. What's the main features of Micro Oval Gear Flow Meter? 1) Anti-dust,anti-vibration,anti-corrosive&explosion-proof. 2) Max accuracy up to 0.2% 3) Min flow : 0.1ml/min 4) Max temperature: 200C 5) Max pressure: 1000bar 6) Viscosity liquid:0.3~10000cps.
MS5534C Barometer Module SPECIFICATIONS * 10 - 1100 mbar absolute pressure range * 6 coefficients for software compensation stored on-chip * Piezoresistive silicon micromachined sensor * Integrated miniature pressure sensor 9 x 9 mm * 16 Bit ADC * 3-wire serial interface * 1 system clock line (32.768 kHz) * Low voltage and low power consumption Description: The MS5534C is a SMD-hybrid device including a piezoresistive pressure sensor and an ADC-Interface IC. It provides a 16-bit data word from a pressure and temperature dependent voltage. Additionally the module contains 6 readable coefficients for a highly accurate software calibration of the sensor. MS5534C is a low power, low voltage device with automatic power down (ON/OFF) switching. A 3-wire interface is used for all communications with a microcontroller. The MS5534C is fully software compatible to the previous versions (MS5534A and MS5534B). Compared to the previous versions, the ESD sensitivity level has been improved to 4kV on all pins. Features: * Supply voltage 2.2 V to 3.6 V * Low supply current * -40'C to +125'C operation temperature * No external components required Applications: * Mobile altimeter/barometer systems * Weather control systems * Adventure or multi-mode watches * GPS receivers
MS8607-02BA01 PHT Combination Sensor SPECIFICATIONS * Integrated pressure, humidity and temperature sensor * QFN package 5 x 3 x 1 mm3 * Operating range: 10 to 2000 mbar, 0%RH to 100%RH, -40 to 85 'C * High-resolution module: 0.016 mbar, 0.04%RH, 0.01'C * Supply voltage: 1.5 to 3.6 V * Fully factory calibrated sensor * I2C interface DESCRIPTION The MS8607 is the novel digital combination sensor of MEAS providing 3 environmental physical measurements all-in-one: pressure, humidity and temperature (PHT). This product is optimal for applications in which key requirements such as ultra low power consumption, high PHT accuracy and compactness are critical. High pressure resolution combined with high PHT linearity makes the MS8607 an ideal candidate for environmental monitoring and altimeter in smart phones and tablet PC, as well as PHT applications such as HVAC and weather stations. This new sensor module generation is based on leading MEMS technologies and latest benefits from Measurement Specialties proven experience and know-how in high volume manufacturing of sensor modules, which has been widely used for over a decade. FIELD OF APPLICATION * Smart phones and Tablet PCs * HVAC applications * Weather station * Printers * Home Appliance and humidifiers
MS1451 Description: The MS1451 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are required. The pressure sensor is available with a gage or absolute pressure sensing chip that is attached to a surface mountable ceramic substrate. A cap is attached to the ceramic substrate, protecting the chip and providing the pressure port. The devices are shipped in plastic anti-static shipping tubes for use with automated production equipment. Caps are also available with a narrow hole or a large hole to interface with the pressure media. Features: * PC Board Mountable Pressure Sensor * 0-60 mV Output * Gage and Absolute Pressure * Low Cost * Surface Mount Package * ±0.25% Pressure Non-linearity * 3 Pressure Port Options * Solid State Reliability * Low Power Applications: Altitude Measurement Barometric Pressure Medical Instrumentation Consumer Appliances Tire Pressure
HS1101LF - Relative Humidity Sensor * Lead free component * High reliability and long term stability * Patented solid polymer structure * Suitable for linear voltage or frequency output circuitry * Fast response time and very low temperature coefficient DESCRIPTION Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications such as office automation, automotive cabin air control, home appliances, and industrial process control systems. They are also useful in all applications where humidity compensation is needed. FEATURES * Full interchangeability with no calibration required in standard conditions * Instantaneous desaturation after long periods in saturation phase * Compatible with automatized assembly processes, including Pb free wave soldering and reflow processes * Individual marking for compliance to stringent traceability requirements * Part may be washed with distilled water. APPLICATIONS * Automotive * Home Appliance * Printers * Meteorology PERFORMANCE SPECS Operating Temperature: -60 to 140 °C Storage Temperature: -60 to 140 °C Supply Voltage (Peak): 10 Vac Humidity Operating Range: 0 to 100 % RH
Humidity Module HTG3513CH Voltage Output Humidity Sensor DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3513CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTG3513CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 3.3 Vdc * Nominal Output @55%RH: 1.462~1.568 V * Humidity Average Sensitivity: +18 mV/%RH * Current consumption: 1.0 mA dc â?¢ Humidity Measuring Range: 0~100 %RH * Humidity Operating Range: 0~100%RH * Temperature Operating Range: -40 ~110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers
Temperature and Relative Humidity Sensor Module Description: Based on the rugged HS1101LF humidity sensor, HTF3000LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output. Features: * Small size product * Compliant with RoHS recommendations and most of Lead Free Soldering Process * Humidity calibrated within ±3% @55%RH at 5Vdc * Stable, proportional frequency output from 0 to 100% RH * High quality thermistor * One of the smallest humidity/temperature modules on the market * High reliability and long term stability * Not affected by water immersion * Stable characteristics with temperature * Part could be washed with distilled water Humidity Sensor Specific Features: * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Patented solid polymer structure Temperature Sensor Specific Features: * 10kΩ ±1% NTC temperature sensor * Stable * High sensitivity APPLICATIONS: * Printers * HVAC controller PERFORMANCE SPECS Storage Temperature: -40 to 105 'C Storage Humidity: 0 to 100 % RH Supply Voltage (Peak): 16 Vdc Humidity Operating Range: 0 to 100 % RH Temperature Operating Range: -40 to 85 'C
MS5541-30C Miniature 30 bar Module Specifications * 0 - 30 bar absolute pressure range * 6 coefficients for software compensation stored on-chip * Piezoresistive silicon micromachined sensor * Integrated miniature pressure sensor 6.2 x 6.4 mm * 16 Bit ADC * 3-wire serial interface * 1 system clock line (32.768 kHz) * Low voltage and low power consumption * High Endurance (HM version) Description: The MS5541-30C is the high-pressure version of MS5541C pressure sensor module. It contains a precision piezoresistive pressure sensor and an improved version of the 16 Bit Micropower Sensor interface IC known from the MS5535C. The ESD sensitivity has been improved to 4kV on all pins. In addition to this the MS5541- 30C is from its outer dimensions compatible to the MS54xx series of pressure sensors. It uses an antimagnetic polished stainless steel ring for sealing with O-ring. The sensor provides 16 Bit pressure and temperature data via a 3 wire serial interface that can be easily interfaced with 4 Bit low power microcontrollers. 64 Bit of factory programmed PROM provides calibration data for a highly accurate pressure and temperature calculation. Features: * Resolution 3.0mBar * Supply voltage 2.2V to 3.6V * Operating current < 5µA * Standy current < 0.1µA * -40'C to +85'C * No external components required Applications: * Diving computers and divers watches * Mobile water depth measurement systems * High endurance pad technology (HM version)
1. Features Gallium Nitride Based Material Schottky-type Photodiode Photovoltaic Mode Operation Good Visible Blindness High Responsivity & Low Dark Current 2. Applications Full UV Band Monitoring UV-A Lamp Monitoring 3. Absolute Maximum Ratings Storage Temperature: -40~90'C Operating Temperature: -30~85'C Reverse Voltage: 5V Forward Current: 1mA Optical Source Power Range: 0.01µ~100m W/cm2 Soldering Temperature: 260'C 4. Characteristics (at 25'C) Dark Current: 20nA Photo Current: 2.8~3.4µA, 3.1µA(Typ) Temperature Coefficient: 0.05%/'C Responsivity: 0.18A/W Spectral Detection Range: 220~370nm Active area: 1.536mm2
SO2-B4 Sulfur Dioxide Sensor 4-Electrode PERFORMANCE Sensitivity nA/ppm at 2ppm SO2 275 to 475 Response time t90 (s) from zero to 2ppm SO2 < 30 Zero current nA in zero air at 20â?? -80 to +80 Noise* ±2 standard deviations (ppb equivalent) 5 Range ppm limit of performance warranty 100 Linearity ppb error at 100ppm SO2 , linear at zero and 10ppm SO2 0 to -2 Overgas limit maximum ppm for stable response to gas pulse 200 * Tested with Alphasense ISB low noise circuit LIFETIME Zero drift ppb equivalent change/year in lab air < ±20 Sensitivity drift % change/year in lab air, monthly test < ±15 Operating life months until 50% original signal (24 month warranted) > 36 ENVIRONMENTAL Sensitivity @ -20â?? (% output @ -20â??/output @ 20â??) @ 2ppm SO2 70 to 82 Sensitivity @ 50â?? (% output @ 50â??/output @ 20â??) @ 2ppm SO2 95 to 110 Zero @ -20â?? nA change from 20â?? 0 to -10 Zero @ 50â?? nA change from 20â?? 10 to 30 CROSS SENSITIVITY Filter capacity ppm·hrs 450 H2S sensitivity % measured gas @ 5ppm H2S < 2 NO2 sensitivity % measured gas @ 5ppm NO2 < -160 Cl2 sensitivity % measured gas @ 5ppm Cl2 < -40 NO sensitivity % measured gas @ 5ppm NO < -2 CO sensitivity % measured gas @ 5ppm CO < 2 H2 sensitivity % measured gas @ 100ppm H2 < 0.5 C2H4 sensitivity % measured gas @ 100ppm C2H4 < 1 NH3 sensitivity % measured gas @ 20ppm NH3 < 0.1 CO2 sensitivity % measured gas @ 5% CO2 < 0.1 KEY SPECIFICATIONS Temperature range â?? -30 to 50 Pressure range kPa 80 to 120 Humidity range % rh continuous (see note below) 15 to 90 Storage period months @ 3 to 20°C (stored in sealed pot) 6 Load Resistor ohm (ISB circuit is recommended) 33 to 100 Weight g < 13
Iaq_100 p package 110-801 15x15 indoor air quality sensor 100 ppm p package 110-801 Description Spec sensors' iaq_100 is a screen printed electrochemical sensor component specifically designed for the broad detection of gases associated with poor air quality: sulfides, alcohols, ammonia, odorous gases, and carbon monoxide. Benefits * zero power sensor Sensor circuit - < 10 uw max * cold operation - no heating required * rugged design- not poisoned by sulfides, chlorides, nh3 * stable response - not affected by humidity, co2, n2, ar, most saturated hydrocarbons, hexane * small size& low profile - 20x20x3 mm * sensitive - in the ppm range * easy to use - linear response * long life - 10 years expected life * fast response - < 20 seconds * rohs compliant Applications * bad air quality detection * indoor air monitor * air purifier controls * weather stations * internet of things * smart homes * early fire detection * leak detection * hvac ventilation control
So-e2-960 Limiting current type sensor oxygen sensors When voltage is applied to a zirconia electrolyte cell, oxygen is pumped through the zirconia disc from the cathode side to the anode side because the carriers of the current flowing through the zirconia electrolyte are oxygen ions. By attaching a cap with a pinhole on the cathode side of the cell and by increasing the voltage over the cell the current shows saturation due to the rate limiting step in the transfer of oxygen to the cathode. This saturation current is called limiting current and is nearly proportional to the ambient oxygen concentration. Below the advantages of the oxygen sensor: Measuring range 1.00 to 96.0 vol.% oxygen High accuracy For many types a more or less linear characteristic Small temperature dependence of the sensor signal Low interference with other gases Long service life In many cases â??single point calibrationâ?? necessary only once Applications: Medical Laboratory Food industry Household/gastronomy Measuring technique Security technology/monitoring (electrical-) industry Characteristic data: Measuring gas: oxygen concentration Measuring medium: gaseous atmosphere Measuring principle: limiting current type sensor Measuring ranges: 1.00 - 96.0 vol.% o2 Response time (t90): 2 to 25 sec. (depends on: sensor type, gas flow, measuring chamber) Sensor voltage / heating voltage / power consumption / heater cold resistance Sensor voltage: 0, 7 to 1, 6 volt Heating voltage: 3.6 â?? 4.4 volts Power consumption: 1.3 to 1.8 watts (depends on application and packaging) Cold resistance: r( 25'c ) = 3.25 ohm â± 0.20 ohm Warm up time: min. 30 s -
Cozir ambient sensor Ultra low power carbon dioxide sensor Cozir is an ultra low power (3.5mw4), high performance co2 sensor, ideally suited for battery operation, portable instruments and hvac.Based on gss ir led and detector technology, and innovative optical designs, the cozir offers the lowest power ndir sensor available.Optional temperature, humidity and light sensing are available.Cozir is a third generation product from gss - leaders in ir led co2 sensing. With measurement ranges of 0-2000ppm, 0-5000ppm and 0-1% the cozir ambient sensor is suitable for applications such as building control and horticulture. * ultra-low power 3.5mw * measurement ranges from 0 to 1% * low noise measurement -
Sprintir High speed carbon dioxide sensor Sprintir is a high speed (20 hz) co2 sensor, ideally suited for applications which require capture of rapidly changing co2 concentrations including metabolic assessment and analytical instrumentation. * high speed sensing (20hz) * measurement ranges from 0 to 100% * 3.3v supply * low power requirement 35mw * flow through adaptor (optional) -
Tgs4161 for the detection of carbon dioxide Features: * high selectivity to co2 * compact size * low dependency on humidity * long life and low cost * low power consumption Applications: * indoor air quality control * co2 monitors Tgs4161 is a new solid electrolyte co2 sensor which offers miniaturization and low power consumption. A range of 350~10, 000ppm of carbon dioxide can be detected by tgs4161, making it ideal for indoor air control applications. The co2 sensitive element consists of a solid electrolyte formed between two electrodes, together with a printed heater (ruo2 ) substrate. By monitoring the change in electromotive force (emf) generated between the two electrodes, it is possible to measure co2 gas concentration. The top of the sensor cap contains adsorbent (zeolite) for the purpose of reducing the influence of interference gases. Tgs4161 exhibits a linear relationship between â??emf and co2 gas concentration on a logarithmic scale. The sensor displays good long term stability and shows excellent durability against the effects of high humidity. -
