High pressure sodium lamp600W With high output lumen,90000 Suitable used for mining or agriculture industry
H1-1000ckl-gba 120v~240v, 1000w high frequency ballast Dimmable Ce/ul
Suitable for hps bulb of america and europe standard Input voltage: 100-265vac (120v/240v) Output frequency: 30khz, 20khz(1000w) Input frequency: 50/60hz Power factor: .98 Thd:
Power: 35W 220V Input voltage range: 176-264V 110V Input voltage range: 88V-140 Rated current:185mA Power factor: 0.98 Rated frequency: 50-60Hz Temperature: 15-+55 Trigger voltage: 3.5-5KV Maximum working temperature: 80. 110*76*28(mm).
Ranges from 18W, 26W, 35W, 55W, 66W, 90W, 91W, 135W etc and the LAX series of electronic ballasts for Low Pressure Sodium lamp developed by leianxun company adopt the SCM CPU digital technique. It insures the intellectual protection of electronic ballasts---keeping the safety of ballasts and the system , when the voltage output terminal is abnormal. In the process of warm-up, triggering, and ignition, the CPU can reach the best state to protect the electrode of lamp /tubes. This is measured by the microsecond controlling span of system and the height of impulse from the trigger voltage. Thus it doubles the longevity of the electrode for lamp tubes greatly. It is perfect for solar power of street lighting.
Features: 1.Metal Halide without exhaust pipe can replace G12 traditional metal halide and can be used in place of commercial lighting, home lighitng and other occasions 2.The advancement of no exhaust pipe structure ensures the consistence of color temperature 3.Higher luminous efficacy and longer life than traditional metal halide 4.Close to CRI of CDM, superior cost-effective. Usage: 1.It must use with compatible magnetic ballast or ignitor and electronic ballast 2.Recommend to use with electronic ballast to extend lamp life, increase system efficency and prevent stobe flash 3.It must use other grade ballast if the voltage is ofen more than 3% of rated voltage 4.It must use a strong current protection device(IEC61167) 5.Suitable for closed(hard glas front cover)fixtures.
An Electronic Ballast is a device/instrument used to control the amount of current in on electric circuit, Also referred as a control gear, an electronic. If generates high frequency alternative goes about more then 25Khz. High freq. allows to lower the system rating without reducing the luminous flux of the lamps. Also available series of
An Electronic Ballast (Sometimes called control gear) is a device intends to limit the amount of current in an Electronic circuit. An Electronic lamp ballast uses solid state electronic circuitry to provide the proper starting and operating electrical Condition to power fluorescent lamps (FTL).An Electronics ballast dissipates some heal around 90%. GRE’s industrial ballast series heaving special features like EMI/RFI filters, spike protections, high power factors etc. Also available ballast series of
Supply Voltage Applicable Tube Dimension Size 110/220/240V T5 T8 257*30*19/240*30*18. 50/60hz.
28W 220~240 V ,50/60 HZ PF>0.97, CF0.97.
Type: magnetic or electronic ballast, T5/T8 or ceiling ballast. Material: 0.3mm iron, fire-proof ABS CBM: 55*55*30/1pcs 32*33*35/100pcs 33.5*32*35.5/50pcs 43*16.5*75/20pcs 23*20.5*10/15pcs 23*16.5*14/20pcs 22*20.5*10/20pcs High harmonic, low power, low work temperature, low voltage launch. Protect for momentary high voltage and abnormal state. Conforms to 3C, GB15143-1994, GB17743-1999 standard strictly.
28 watts No ring formation No harmonic distortion 2 yrs warranty Starting 120 v to max 450 v . Please enquire every time.
The ultra thinnest ballast ROHS and E-MARK 13 Certification Endure 125 degree All of best electrical parts Germany technology 1) Input voltage range : 9V~16V 2) Rated voltage : 13.2V 3) Cold light up current : 6.4A 4) Hot light up current : 4.3A 4) Max. start voltage : 23kV 5) Input current : 3.2A 6) Output power : 40.2W 7) Working temperature : -40~125¿¬pC 8) Size : 5.6cm*5.6cm*0.8cm
The ultra thinnest ballast ROHS and E-MARK 13 Certification Endure 125 degree All of best electrical parts Germany technology 1) Input voltage range : 9V~16V 2) Rated voltage : 13.2V 3) Cold light up current : 6.4A 4) Hot light up current : 4.3A 4) Max. start voltage : 23kV 5) Input current : 3.2A 6) Output power : 40.2W 7) Working temperature : -40~125¿¬pC 8) Size : 5.6cm*5.6cm*0.8cm
Electronic ballast for uhp-projector lighting reources Electronic ballast for metal halide lamps Electronic ballast for stage light hid Varieties of electronic ballast for your choosing
Electronic ballast 40w choke 10 pcs.
Dimmable electronic ballasts Fl 2x35/220-240v t5 dim-a Dimming range from 1-100% Lamp start at 1% possible Standard dc1-10v control interface (en60929 with earth leakage 0.5ma) Defined lamp friendly warm start within 1.5 s with ac and 0.6s with dc Dc operation in emergency lighting Installations to vde0108 Safe shutdown of defective lamps Safe shutdown of lamps at end of life Automatic restart after lamp replacement Operating frequency ~40-120khz Carton
T8 electronic ballast 1)power voltage: 220v 2)power requency: 50-60hz 3)power actor: 0.98 4)coecient: 0.95 5)thd: n15% 6)c: n1.7 8)speciications: 1 x 18w, 2 x 18w, 3 x 18w, 1 x 30w, 2 x 30w, 3 x 30w, 1 x 36w, 2 x 36w, 3 x 36w, 1 x 58w, 2x58w, etc 9) metal housing We can manuacture dierent sizes and speciications o Electronic ballasts according to customers' request.
Electronic ballast 1) power voltage: 220v 2) power frequency: 50-60hz 3) power factor: 0.98 4) coeffcient: 0.99 5) thd: n15% 6) cf: n1.7 8) specifications: 1 x 24w, 2 x 24w, 3 x 24w, 1 x 36w, 2 x 3 6w, 3 x 36w, 1 x 40w, 2 x 40w, 1 x 55w, 2 x 55w
Sell t5, t6 electronic ballast Specifications: 1). Power voltage: 220v 2). Power frequency: 50-60hz 3). Power factor: 0.98 4). Coeffcient: 0.95 5). Thd: 10% 6). Cf: 1.7 7). Life expectancy(hrs): 20000hrs 8). Ext.Dimension(lx wx h): 320x 34x 28mm; 365x 40x 30mm 9). For lamp type: 2 x 14w, 2 x 21w, 2 x 28w, 2 x 35w, 3 x 14w, 3 x 21w, 3x 28w, 3 x 35w 10) metal housing Features: 1) energy saving 2 )low voltage igniting 3) high power factor 4) low harmonic 5) long life 6) flicker free and no noise 7) easy to install and use We can manufacture different sizes and specifications of Electronic ballasts according to customers' request.We also Can provide oem service
