It can effectively remove gum, sludge, varnish and other deposits, restore carburetor to good condition and enhance combustion efficiency. Solve the problem of unstable engine idle speed and difficult starting.
Brake parts cleaner is composed of aerosol can, aerosol valve, material liquid and propellant, which can effectively clean the dust and oil of brake parts, maintain the braking performance, and eliminate the noise generated during braking. Features Fast evaporation, no residue l Quick cleaning No corrosion to base material l safety and eco-friendly Application Mainly used for cleaning brake parts of automobiles, motorcycles and bicycles.
FEATURES This product is consist of varieties of organic solvents, thickeners and additives, having the advantages of simply operating, high paint removing efficiency, no corrosive to metals. Its suitable for removing: oil based paints, such as self-drying alkyd paint, nitric paint, acrylic paint and a few epoxy and cold curing bi-component paints. APPLICATION Its suitable for removing: oil based paints, such as self-drying alkyd paint, nitric paint, acrylic paint and a few epoxy, ect.
Features Contact cleaner can effectively dissolve and remove dirt, with a fully evaporate, leaving no trace, no corrosion to metal surface features, this product is non-toxic, no bad odour, can prevent the electrical failure, improve the running state of the electrical components; In turn the power off situation effectively remove the dust on the precision electronic instruments and other equipment, oil, moisture, facing the electrostatic, the harmful material such as metal powder, prolong the service life of equipment, is to ensure the precision electronics equipment in the best working state of efficient protectant. Application Is mainly used in electronic circuit boards, relays, switch off, the circuit connection, generator, motor controller, program-controlled switches, numerical control equipment, computer, card telephone, signal, miniature bearing, and So on all kinds of precision electronic equipment maintenance and maintenance.
Snow spray also known as artificial snow. Under the condition of certain temperature and humidity, the snowmaking machine high pressure water through the nozzle after the formation of tiny mist, at the same time the high pressure generated by the air compressor air is mixed with high pressure water and the nuclear device nozzle produce seeds snow grains, as a result of the action of high power fan, these seeds snow grains and tiny water spray nozzle in the process of mass ejection combination, formed the flakes. We need make sweet romance action, highly effective make happy atmosphere to orgasm. Advantages 1.Strong adhesiveness 2.Spray continuously 3. Easy washable 4. High extrusion rate 5. nonflammable, eco-friendly Application This product is used for all kinds of festive occasions, such as birthday party, civic party, wedding, the Spring Festival, dance party, celebration, party, etc. Can also be combined with all kinds of mold injection on glass, wall, door cabinets, etc.
FEATURES Carburetor cleaner is composed of aerosol can, aerosol valve, liquid material and propellant, which can effectively remove the deposits such as colloid, oil sludge, paint film, etc., restore the good state of the carburetor and enhance the combustion efficiency. Solve the problem of unstable engine idling and difficult starting. APPLICATION It is mainly used for cleaning carburetor, fuel injection nozzle, spark plug, throttle valve and other parts of automobiles and motorcycles. It can also be used for cleaning metal parts such as engine appearance and chain.
Theaoson tire cleaner is a water-based formula that integrates penetration, cleaning, retreading, and protection of tires at one time. It is rich in cleaning foam and can effectively remove grease and dirt on tires, and can effectively prevent tires from aging and cracking. It is suitable for car tires, bumpers, rubber edges, etc. After use, it can restore the black luster of car tires and restore it as new.
FEATURES This product can eliminate the original metal surface due to the formation of the chemical reaction of rust spots and high-temperature oxide, the chemical erosion caused by the metal on metal devices on the device catching and rust die such phenomena, but also to prevent the corrosion of metal equipment and parts, with a high infiltration, loose rust and other functions, is the effective maintenance and repair of various equipment assistant. APPLICATION This product is widely used in vehicles, ships, construction machinery, agricultural machinery, electronics, electrical equipment such as theinconvenience caused due to rust.
These oils are specially designed keeping in view the high temperature operating conditions encountered in air cooled 4 Stroke 2 Wheeler engines unlike in the case of passenger car engines, which are water cooled. Being Multi-grade oils, these are suitable for use in all seasons. This oil provides better oxidation stability.
Possess special frictional properties required for smooth operation of wet clutches used in 4 stroke 2 wheelers. Provide outstanding oxidation stability there by ensuring cleaner engine and extended oil life. Good wear protection. Minimize engine deposits due to excellent sludge and varnish control.
This oil is designed for high power modern 4-stroke motor cycles. This oils is also suitable for earlier models of 4-stroke motor cycles & scooters. 20W40 is fully synthetic used under extream pressure and long ride.
10W-30 motor oil makes for a decent high-mileage oil. It gives a better fuel economy while reducing the oil consumption for older engines.
20W50 oil is suitable for large or small diesel engines, gasoline engines, motorcycles and aviation vehicles. It is also suitable for both air- and liquid-cooled engines.
CORON 20W-50 Engine Oil 1.2 L is synthetic engine oil. Vehicles need the best engine oil to give their engines running smoothly. Package is 20 Pcs X 1.2L.
CORON 15W40 4-stroke (4T) engine oil formulated by superior quality base oils and specially selected performance additives to provide excellent protection for engine, gearbox and wet clutch of 4-stroke two wheelers- Royal Enfield/Jawa and similar segments. Reduces vibration and damping engine noise. High viscosity index ensures viscosity consistency under High-RPM, High and low Temperature conditions, improves wear protection. These ensure engine protection and increases Engine Power. These oil meet the requirements of leading global 4-stroke two wheelers manufacturers.
The oil is applied to four-stroke engines of motorcycles, scooters, all terrain vehicles and other motor equipment. Specially designed for modern high-powered four-stroke engines of motorcycles operated in loaded modes (high speed, durable maximum and/or dynamic loads). Effective for engines with integrated (or separate) transmissions. Ensures smooth gear shifting and reliable operation of the clutch in the oil bath. Due to enhanced detergent properties, the oil keeps the engine perfectly clean.
CORON 15W-40 is the most advanced High-Lubricity Motor Engine Oil Specially Formulated and Tested For the Latest High-Performance Diesel Engines With Seal Guard Technology and Exhaust After Treatment System. Long-term oxidation stability. Maximum Resistance at High Temperatures.
It is suitable for lubrication of various friction parts such as bearing of metallurgical rolling machine, bearing of refractory equipment kiln car, casting sand falling machine, chemical roasting, mechanical processing and heat treatment, printing and dyeing roasting machine, paper dryer, rubber, plastic hot rolling and cement industry equipment. Worked Cone Penetration,0.01mm : 265-295 Dropping point :245 degree Celsius min operating temperature: -20 - 220 degree Celsius the leading lubricant manufacture with 32 years history , Our grease and oil production capacity is 100,000 tons/year.
It is suitable for lubrication of hub bearing and chassis parts of high-speed passenger cars and heavy-duty trucks under harsh conditions such as high temperature and heavy load, and lubrication of metallurgical equipment and construction equipment. Product main specification as below: Worked Cone Penetration,0.01mm : 265-295 Dropping point :260 min operating temperature: -20 220
Worked Cone Penetration,0.01mm : 220-250 Dropping point :194 min operating temperature: -20-120 Suitable for the lubrication of rolling bearings, sliding bearings and other friction parts of various mechanical equipment in the temperature range of -20 120
