Description: Wine insulated tank is suitable for mucus elimination, stabilization and other oenological processes, which require a tank with thermo-isolative characteristics. Dimple jacket is for controlling the temperature perfectly. The entire inside tank surface is covered with the insulation material which is polyurethane foam. The standard insulation thickness is 80mm. Features: Fully polyurethane foam Insulation reduce heat emission and energy loss. Stainless steel cladding and 70-100mm PU foam have better effect than insulation coatings. Stainless steel welded cladding provides better protection and fine appearance. Dimension: Capacity: kl V Shell dimension: mm D Total height: mm H Legs N Cooling area m2 BM1 920*1500 2180 3 1.4 BM2 1270*1610 2600 3 2.2 BM3 1500*1830 3000 4 3 BM4 1600*2000 3250 4 4 BM5 1600*2440 3650 4 5 BM6 1800*2440 3500 4 5.5 BM8 1820*3050 4650 4 7 BM10 1900*3600 4650 4 8.5 BM12 1900*4270 5750 4 10 BM15 2000*4880 5950 4 12 BM20 2300*4880 6100 4 14 BM25 2600*4880 6050 4 15 Optional: 2mm thick welded cladding or 0.7mm riveted cladding Side agitator Wide/short type or slim type Full insulation or part insulation Prettech Wine Insulated Tank is a great alternative for energy saving and better temperature control. The polyurethane foam has better insulation efficiency than polystyrene. The full welded stainless steel cladding is very durable. It also can be used as cold stabilization tank after the fermentation process. Hot Tags: wine insulated tank; wine tank with isolation; isolation wine tank; wine tank; wine storage tank; wine fermentation tank
Description: Pump-over wine fermentation tank is primarily intended for maceration of grape pomace, by pumping the juice from bottom and pouring it from top to the cap. It's also used as a classic wine storage tank as demand. Features:Â 1. Sprinkler and circulation pipe enable the must to be pumped under the cap, which helps the maceration better and faster. 2. Big rectangular mandoor provides an easy dicharging of rape by manual . 3. The large rectangular mnahole makes the emptying and cleaning of the tank easy and simple. 4. Filting grid mounted onto the interior tank to filt the residuel, and filtering plate at the drainage port for further filtering.
Prettech stainless steel edible oil tank is designed to be a good choice for sanitary bulk oil storage. It's all stainless steel 304 made(ss 316L for high acid oils). The tank can be designed to be on legs or on concrete plinth, depends on the tank capacity. Filtering vent ensure the sanitary inside the tank even in dusty working environment. Heating jacket or inner heating coil is mounted for palm oil and tallow tanks, to maintain the flow of these high viscosity oil.
The brief Introduction of ADA Durable Flexitank Flexitank is also called Flexibag, it's suitable to 20ft container, used for non-hazardous liquid products' package for transportation and storage. ADA Durable Flexi Bags For Containers 3/4 Layers PE And 1 Layer PP Flexitank is a new liquid bulk packaging product, which is constituted by food-grade multilayers high strength PE film high strength, corrosion-resistant PP food grade ball valve butterfly valve. It can turns a normal standard 20ft container into a liquid tank. The Advantage of Flexitank compare with ISO Tank, drum 1. Compare with ISO tanks same volume ADA flexitank with lower sea freight, lower storage charge and without rent cost, returning freight and cleaning cost. 2. Compare with drums one 20ft container, use ADA flexitank can load 24000L products, but use drums can load 16000L at most, same sea freight ADA flexitank can load 8000L more products. 3. ADA valve special design of the food grade ball valve, make the residue less than 10 kgs when unloading and it s more safety with lock and special flange design. 4. Easy operation two people with one hour can accomplish all the loading and unloading work, save time and save labor. 5. Wide application suitable to different kinds of non-hazardous liquid products. 6. Material- All material including PE, PP are brand new material.
Price includes tank, 3kW reducer, mechanical seal, motor, casing, stirring, valve, etc. The equipment is used in chemistry, pharmaceutical intermediates, food and so on.
Pressure Tank, storage tank, pressure vessel in stainless steel, steel. OEM/ODM is available. Welding Service, Machining Service.
Dewatering comes with automatic on-off feature. It comes pre-fitted float switch, this ensure that pump gets automatically switched on & off as per requirements. You donâ??t have to go through confusing installation procedures as it comes read to use. All you need is to drop it down the tank and it is ready to use. With the help of stainless steel body, there are less chances of wear and tear. The parts of the pump are rust free. Thermal Overload Protector offer protection to the motor from burning because of overload. Features : Automatic on/off feature. No installation needed and ready to use. Fitted with TOP (thermal overload protector). Stainless steel body. Rust free body. Applications: Filling domestic ponds, fountains and kids pools. Domestic washing of cars. Help in draining accumulated water during monsoons.
TRANSFORMER TANK FABRICATION
Capacity 51.50 Liters Container Type Open Top Container Storage Material Liqiud Nitrogen LN2 Material Aluminium Alloy
Which main used to scald the sheep hair for de-hairing processing, main data as following 1)-Working principle: steam heating 2)-Scalding temperature 58-62 3)-Out size: 3000 1600 800mm 4)-Component and material: Hot galvanized steel or stainless steel main frame 80mm polyurethane insulation layer 2mm stainless steel plate shell Drain valve Temperature control system 304sainless steel steam heating pipe
Pipeline system inflatable air grip union Seal o grip union air o union are air inflatable connections for low pressure fluid or mud suction and return lines. The seal o grip carbon steel body welds in place on mud tanks or manifold pipe. A leak right seal is achieved with rig supplied compressed air, even if the connecting pipe is not perfectly aligned. The oil and abrasion resistant NBR pneumatic o tube can be inflated up to 200 PSI against the outside diameter of the connecting pipe, speeding field set up and eliminating the need for low pressure flanged connections. Features Low requirement to centered when installed, to achieve quick install and seal The pipeline can be removed without other tools after pneumatic union deflated, adaptable and easy maintenance. No wrenches, bolts & nuts required. Fast and easy make up without close alignment. Pneumatic Tube inflatable up to 200 PSI.
Which main used to collect sheep blood and transfer to appoint area for further treatment, main data as following: 1)-Out size: 4500 1000 500mm 2)-Component and material: 38 38 2mm 304 stainless steel Square tube 2mm 304 stainless steel pattern plate Stainless steel adjusting foot Sewage pipe and blood collection pipe
Pipeline system inflatable air grip union Seal o grip union air o union are air inflatable connections for low pressure fluid or mud suction and return lines. The seal o grip carbon steel body welds in place on mud tanks or manifold pipe. A leak right seal is achieved with rig supplied compressed air, even if the connecting pipe is not perfectly aligned. The oil and abrasion resistant NBR pneumatic o tube can be inflated up to 200 PSI against the outside diameter of the connecting pipe, speeding field set up and eliminating the need for low pressure flanged connections. Features Low requirement to centered when installed, to achieve quick install and seal. The pipeline can be removed without other tools after pneumatic union deflated, adaptable and easy maintenance. No wrenches, bolts & nuts required. Fast and easy make up without close alignment. Pneumatic Tube inflatable up to 200 PSI.
Suitable Part for Oil Engine/ Agricultural Engine/ Generator Engine.
we are one of the businesses that specialists in the tanks and pressure vessels fabrication Tanks & Pressure Vessels Fabrication Pressure Vessels Fabrication Manufacturing in , Tanks & Pressure Vessels Fabrication in , Tanks & Pressure Vessels Fabrication
Tank volume: 3.5 cu.ft./ 0.5 liter Tank material: Aviation aluminum Tank size: 35 6 6 cm Color: green, blue, black, custom Usage scenario: backup air for deep diving, snorkeling, fire protection, call fall into river self-rescue, training, clean boat bottom etc. Logo: customizable Breathing time: 5-10 minutes Limited depth: 10m/ 32 feet Product information: 2 3.5 cu.ft./ 0.5 liter tank, 2 breathing head, 2 storage bag, 2 anti-missing rope, 1 scuba adapter, 1 diving mask, 1 hand pump, 1 storage bag Certification: DOT, CE, ISO
The brief Introducion of ADA Durable Flexitank Flexitank is also called Flexibag, it's suitable to 20ft container, used for non-hazardous liquid products' package for transportation and storage. ADA Durable Flexi Bags For Containers 3/4 Layers PE And 1 Layer PP Flexitank is a new liquid bulk packaging product, which is constituted by food-grade multilayers high strength PE film + high-strength, corrosion-resistant PP + 3 food grade ball valve/ butterfly valve. It can turns a normal standard 20ft container into a liquid tank. The Advantage of Flexitank compare with ISO Tank, drum 1. Compare with ISO tanks same volume ADA flexitank with lower sea freight, lower storage charge and without rent cost, returning freight and cleaning cost. 2. Compare with drums one 20ft container, use ADA flexitank can load 24000L products, but use drums can load 16000L at most, same sea freight ADA flexitank can load 8000L more products. 3. ADA valve special design of the 3 food grade ball valve, make the residue less than 10 kgs when unloading and it s more safety with lock and special flange design. 4. Easy operation two people with one hour can accomplish all the loading and unloading work, save time and save labor. 5. Wide application suitable to different kinds of non-hazardous liquid products. 6. Material- All material including PE, PP are brand new material.
