MICROceL HS Hydrogen Sulfide Sensor (H2S Sensor) Description MICRO 3-electrode hydrogen sulphide sensor MICROceL HS Hydrogen Sulfide Sensor (H2S Sensor) Key Features & Benefits * A robust hydrogen sulfide sensor suitable for portable life safety applications * Extremely small size MICROceL HS Hydrogen Sulfide Sensor (H2S Sensor) Technical Specifications * Operating Principle: 3-electrode electrochemical * Measurement Range: 0-100 ppm H2S * Sensitivity: 0.105 ± 0.025 µA/ppm * T50 Response Time:
ZE08-CH2O Electrochemical CH2O Detection Module Profile ZE08-CH2O is a general-purpose and miniaturization electrochemical formaldehyde detection module. It utilizes electrochemical principle to detect CH2O in air which makes the module with high selectivity and stability. It is built-in temperature sensor to make temperature compensation. It has the digital output and analog voltage output at the same time. It is a combination of mature electrochemical detection principle and sophisticated circuit design. ZE08-CH2O Electrochemical CH2O Detection Module Features * High sensitivity &resolution, Low power consumption, Long life * UART/Analog Voltage/PWM wave output * Good stability, excellent ability of Anti-interference * Temperature compensation , Excellent Linear output ZE08-CH2O Electrochemical CH2O Detection Module Main Application Portable detector, air-quality monitor, air cleaner, air renewal system, air conditioner, smart home. ZE08-CH2O Electrochemical CH2O Detection Module Technical Parameters * Target Gas: CH2O * Interference Gas: Alcohol, CO &ect. * Working Voltageâ??: 3.7V~9V * Response time: â?¤60s * Detection Range: 0~5ppm * â??Resolution: â?¤0.01ppmâ?? * Operating Temp.: 0~50â?? * Operating Hum.: 15%RH - 90%RH(No condensation) * Working life: 2 years (in air)
IRceL CH4 NDIR CH4 Sensor Description Miniature infrared sensor with on-board EEPROM and thermistor IRceL CH4 NDIR CH4 Sensor Key Features & Benefits: * Integrated thermistor for accurate temperature compensation * EEPROM programmed with sensor specfic performance characteristics * Compact Size IRceL CH4 NDIR CH4 Sensor Technical Specifications * Operating Principle: Non-Dispersive Infra-Red * Measurement Range: 0-5% vol. Methane * Accuracy (-20C to +50C): Within ± (0.1% vol CH 4 + 4% of concentration)?? * Response Time (T90): < 35 Seconds * Supply Voltage: 3-5 VDC, 3.3 V to utilise EEPROM calibration * MTBF: > 5 years
NH3-3E100SE Ammonia Sensor NH3 Sensor Description NH3-3E100SE Ammonia Sensor, 3 Electrode sensor; available in Mini, Classic, 4-Series and 7-Series formats. NH3-3E100SE Ammonia Sensor NH3 Sensor FEATURES * Amperometric 3 electrode sensor cell * Very stable zero reading * Very selective * Highly sensitive * Hydrous electrolyte NH3-3E100SE Ammonia Sensor NH3 Sensor TYPICAL APPLICATIONS * TLV-monitoring, leakage detection * portable & fixed point applications * Food & Refrigeration Industry, General Industry, Semiconductor Industry NH3-3E100SE Ammonia Sensor NH3 Sensor TECHNICAL SPECIFICATIONS * Measuring Range: 0-100 ppm * Sensitivity Range: 130 nA/ppm ± 30 nA/ppm * Resolution at 20°C: < 1 ppm * Linearity: < 10% full scale * Operation Temperature Range: -20°C to +40°C * Operation Humidity Range: 15-90% r.H, non-condensing
SPD005GAsmd 5 psi Gauge Pressure Sensor with Analogue Output Description This pressure sensor has an amplified analogue output. The sensor is compensated for offset, sensitivity, temperature drift and nonlinearity. The sensor is available in the range from 5 to 100 psi. Other ranges on request. Available in Gauge and Absolute type. The output is ratiometric to the power supply voltage. @ 5 V power voltage the output span is 0.5 to 4.5 V. The SPD analogue series can be considered as an analogue successor of the SPD series. SPD005GAsmd 5 psi Gauge Pressure Sensor with Analogue Output Electrical Characteristics Performance Characteristic at Vcc =5V excitation @ 25C. * Supply Voltage: 4.75~5.5V * Supply Current: Max. 3mA *Pressure range: 0~5psi * Accuracy: ±1.8%FS * Operating temperature: -20~85C * Storage temperature: -40~125C
OPC-N3 PM2.5 Particle Sensor * PM1 , PM2.5 and PM10 * Reduced power standby mode * Capability to measure up to 2,000 µ g/m 3 * Onboard temperature and humidity sensor * SPI interface not included, order code 000-0SPI-00 OPC-N3 PM2.5 Particle Sensor SPECIFICATIONS * Particle range: 0.38 to 40 Spherical equivalent size * Size categorisation: 24 Number of software bins * Total flow rate (typical): 1.2 L/min * Sample flow rate (typical): 220 mL/min * Voltage range: 4.8 to 5.2 VDC * Temperature range: -10 to 50°C * Humidity range: 0 to 95 % rh non-condensing *Weight: < 105g
Sonic-anemo-sdi ultrasonic wind speed sensor description Sonic-anemo-sdi is made from the cv7-v to which a sdi12 protocol and optimizing electrical consumption has been added. Sample rate is 2 hz. This ultrasonic wind sensor operates in a request-response mode. This product is more energy-efficient than standard units. The sonic-anemo-sdi is dedicated to meteorological applications. Sonic-anemo-sdi ultrasonic wind speed sensor available data: - average speed and direction over 10 minutes - minimum wind speed and direction for that period - maximum wind speed (gust 3s) and direction for that period - software version and serial number - data measurement quality rate from the sensor - data for sensor diagnostic (manufacturer use only) Sonic-anemo-sdi ultrasonic wind speed sensor specification: * output data format: sdi-12 v1.3 * information transmited: inst. W. Speed, w. Angle, gust ws/wa, avg, min, max, avaibility * output rate: 2 hz / 30 hz measurement * wind module sensitivity: 0.12 m/s * wind module resolution: 0.05 m/s * wind module dynamic: 0.12 to 40 m/s * direction sensitivity: +/-1.5' * direction resolution: 1' * power supply: 2.7 v to 35 v dc * electrical consumption: 2.9 ma avg. @ 12 v * op. Temp. Without icing: -15'c to +55'c * cable: 5 m / 3 x 0.22 mm2 uv proof * connection: 3 wires * weight of unit assembly: 200 gr with mounting parts.
Mb1003 hrlv-maxsonar-ez0 High performance ultrasonic rangefinder Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder product description The hrlv-maxsonar-ez0 has the widest and most sensitive beam pattern of any unit from hrlv-maxsonar-ez sensor line. This makes the hrlv-maxsonar-ez0 an excellent choice for use where high sensitivity, wide beam, or people detection is desired. Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder product specifiations * resolution of 1-mm * 10hz reading rate * 42khz ultrasonic sensor measures distance to objects * rohs compliant * maximum range of 5000 mm (195 inches) * operates from 2.5v-5.5v * low 3.1ma average current requirement * operational temperature from 0'c to +65'c Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder features and benefits * factory calibrated wide beam width * low operating voltages from 2.5v to 5.5v * all range outputs are active simultaneously * high acoustic sensitivity * detects small targets to longer distances * widest beam width for the hrlv-maxsonar-ez sensors Mb1003 hrlv-maxsonar-ez0 ultrasonic rangefinder applications and uses * people detection * small target detection * high sensitivity applications * obstacle avoidance.
Mb7137 i2cxl-trashsonar-wr High performance ultrasonic trash bin measurement Mb7137 i2cxl-trashsonar-wr ultrasonic sensor product description The mb7137 i2cxl-trashsonar-wr is a weather resistant sensor designed for trash bin measurement. The mb7137 i2cxl-trashsonar-wr features the i2c communication interface. This allows for up to 127 sensors to be operated on a single bus for a network of trash bins that are monitored by a single control device for multiâ??sensor operation. High output acoustic power combined with continuously variable gain, real-time background automatic calibration, real-time waveform signature analysis, and noise rejection algorithms results in virtually noise free distance readings. This holds true even in the presence of many of the various acoustic or electric noise sources. The i2cxl-trashsonar-wr sensors are factory calibrated to match narrow sensor beam patterns and provide reliable mid-range detection zones. Mb7139 is the standard version of this sensor. Mb7137 i2cxl-trashsonar-wr ultrasonic sensor product specifiations * resolution of 1 cm * up to 20hz read rate * 42khz ultrasonic sensor measures distance to objects * rohs compliant * operates from 3.0-5.5v * low 3.4ma average current requirement * maximum range of 350 cm (138 inches) * compatible with up to a 400khz i2c bus speed Mb7137 i2cxl-trashsonar-wr ultrasonic sensor features and benefits * real-time calibration, noise rejection and additional filtering provides stable range information * excellent for applications that require consistently accurate outputs * impressive acoustic and electrical noise resistance Mb7137 i2cxl-trashsonar-wr ultrasonic sensor applications and uses * autonomous navigation * environments with acoustic and electrical noise * bin level measurement * tank level measurement
Cv7-e ultrasonic wind speed sensor description The cv7-e is easily integrated into measurement and monitoring systems. Detects gusts with great responsiveness and low latency. The cv7-e is powered by 8-30 vdc power supply and it outputs rs232 / rs422 / 5 v level signal / nmea0183. The cv7-e shows a data rate twice faster than the cv7 and cv7-v with a data output 4 per second. The small size of this sensor makes it very discreet. Like every lcj capteurs products, cv7-e is energy efficient. Cv7-e has proved its value with universities â??laboratories, scientific and wind tunnels successful tests. It can be used connected to a pc and to any system featuring a nmeaâ® input port. Cv7-e ultrasonic wind speed sensor specification: * output data format: nmea0183, mwv, xdr * information transmited: instant. W. Speed, instant. W. Angle, avaibility * output rate: 4 hz / 60 hz measurement * wind module sensitivity: 0.12 m/s * wind module resolution: 0.05 m/s * wind module dynamic: 0.12 to 40 m/s * direction sensitivity: +/-1.5' * direction resolution: 1' * power supply: 8 v to 30 v dc * electrical consumption: 9 ma * op. Temp. Without icing: -15'c to +50'c * cable: 25 cm / 4 x 0.22 mm2, 20 g/m * connection: 4 wires * weight of the head: 100 gr * weight of unit assembly: 200 gr with mounting parts.
Y504-a dissolved oxygen sensor description The sensor is based on optical fluorescence lifetime quenching technique. Its technical procedure meets astm d888-09 standard for optical sensing of dissolved oxygen. This online sensor is developed to integrate with yosemite wireless monitoring system. Its rugged design and large measurement range make it ideal for sampling, flow cell, ground water and waste water measurements. Y504-a dissolved oxygen sensor applications Fish farmer, waste water plant, river, stream, and ocean monitoring Y504-a dissolved oxygen sensor feature , 0-20mg/l or 0-200% saturation , 0~50'c; ip68 rating , membraneless, no electrodes design , no oxygen consumption , flow independent , automatic temperature compensation , no h2s interference , low drift, fast response, and more accurate , low maintenance, low operating cost , easy sensor cap replacement , rs-485; modbus protocol compatible Y504-a dissolved oxygen sensor technical specifications , range, : 0-20mg/l or 0-200% saturation, , response time: 10 sec , housing ip rating: ip68, , accuracy: 1%, , drift:
Fecs40-1000 for the detection of carbon monoxide Figaro's carbon monoxide sensor fecs40-1000 is a unique electrochemical-type carbon monoxide sensor. Its most notable feature is its unique leak-proof structure, making it ideal for co monitors and detectors in various fields. Fecs40-1000 carbon monoxide (co) sensor features: * high sensitivity/selectivity to co * quick response to co * linear output * long life * stable baseline * unique leak-proof structure Fecs40-1000 carbon monoxide (co) sensor applications: * portable and fixed installation co monitors * co detectors * ventilation control for indoor parking garages Fecs40-1000 carbon monoxide (co) sensor specifications: Detection gas: carbon monoxide Detection range: 0 ~ 1000 ppm Maximum overload: 1500 ppm Output signal: 70±15 na/ppm Repeatability: ±2% Resolution: 1 ppm
3SP_O3_5 P O3 Sensor DESCRIPTION SPECâ??s printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPECâ??s printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size. 3SP_O3_5 P O3 Sensor BENEFITS * Small Size with Low Profile (20x20x3 mm) * Long Life (10 years expected life) * Fast Response (< 15 seconds) * Low Power Consumption * Individually Calibrated (NIST Traceable) * ROHS Compliant * Improved stability and ppb performance 3SP_O3_5 P O3 Sensor APPLICATIONS * Air Quality Monitoring * Industrial Safety * Air Purification Control 3SP_O3_5 P O3 Sensor SPECIFICATIONS * Measurement Range: 0 to 5 ppm * Lower Detection Limit: < 20 ppb (instrumentation dependent) * Resolution: < 20 ppb (instrumentation dependent) * Response Time: < 15 seconds typical * Sensitivity nA/ppm @ 5ppm: -60 +/- 10 nA/ppm * Expected Operating Life: > 5 years (10 years @ 23+/-3'C; 40+/-10% RH) * Operating Temperature Range: -30 to 50'C (-20 to 40'C continuous) * Operating Humidity Range - non-condensin: 0 to 100% RH (15 to 95% continuous) * Power Consumption: 10 to 50 uW (circuit & ambient O3 dependent)
DGS-CO 968-034 Digital CO Sensor Module DESCRIPTION Easily add Carbon Monoxide sensing to your IoT application with our digital CO sensor module that provides a calibrated and temperature compensated output. 0 to 1000 ppm Carbon Monoxide sensor with digital output DGS-CO 968-034 Digital CO Sensor Module BENEFITS * Low Power - 1 mW @ 1 minute sampling * Fast Response - 15 seconds typical * Calibrated & Temp. Compensated Output * Simple Digital UART Interface * Integrated T & RH Sensors * Robust 10-year Estimated Lifetime * ROHS Compliant * Small form Factor * UART to USB adapter provided * Lightweight (< 2 oz.) DGS-CO 968-034 Digital CO Sensor Module APPLICATIONS * Life Safety Levels * Air Quality Levels DGS-CO 968-034 Digital CO Sensor Module MEASUREMENT PERFORMANCE CHARACTERISTICS Based on Standard Conditions 25'C, 50% RH and 1 atm * Measurement Range: 0 to 1000 ppm * Resolution: 0.1 ppm * Zero Accuracy:± 1 ppm * Measurement Accuracy: 15% of reading * Measurement Repeatability:
FECS41-250 for the Detection of Nitric Oxide Figaro's Nitric Oxide Sensor FECS41-250 is a unique electrochemical-type nitric oxide sensor. Its most notable feature is its unique leak-proof structure, making it ideal for NO monitors and detectors in various fields. FECS41-250 Nitric Oxide (NO) Sensor Features: * High sensitivity/selectivity to NO * Quick response to NO * Linear output * Long life * Stable baseline * Unique leak-proof structure FECS41-250 Nitric Oxide (NO) Sensor Applications: * Portable and fixed installation NO monitors * NO detectors * Ventilation control for indoor parking garages FECS41-250 Nitric Oxide (NO) Sensor Specifications * Detection Gas: Nitric Oxide * Detection Range: 0 ~ 300 ppm * Maximum Overload: 1000 ppm * Output Signal: 400 ± 80 nA/ppm * Repeatability: ±2% * Resolution: 0.5 ppm
VPA.8000.1003 Dew Point Sensor Product Description VPInstruments' dew point transmitters are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible. The calibrated transmitters can be instantly incorporated into VPVision or they can be connected to your air or gas management and control system. Maintaining the dew point of your air or gas system will prolong the life of your equipment. Permanent monitoring enables you to detect and prevent problems in time. VPA.8000.1003 Dew Point Sensor Features and benefits 2-wire loop powered connection Dew point or ppm moisture content IP66 (NEMA 4X) Excellent sensor protection Fast response time VPA.8000.1003 Dew Point Sensor Application Extreme dry air
VPA.8000.1013 Dew Point Sensor Product Description VPInstruments' dew point sensors are designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible. The calibrated transmitters can be instantly incorporated into VPVision or they can be connected to your air or gas management and control system. Maintaining the dew point of your air or gas system will prolong the life of your equipment. Permanent monitoring enables you to detect and prevent problems in time. We offer various models which meet both moderate dry air (refrigerant dryer) and extreme dry air (dessicant dryer) applications. VPA.8000.1013 Dew Point Sensor Features and benefits For moderate dry air 3-wire loop powered connection Dew point or ppm moisture content IP66 (NEMA 4X) Excellent sensor protection Fast response time VPA.8000.1013 Dew Point Sensor Application Moderate dry air (refrigerant dryer) PA.8000.1013 Dew Point Sensor Specifications Dew point range: -40 ~ +60'C (-40 ~ 140'F) dew point Temperature: -30 ~ +70'C (-22 ~ 158°F) Humidity: 0 ~ 95% RH (non-condensing) Pressure: 20 barg maximum Output: 4 - 20 mA 3-wire Power supply: 8 - 30 VDC
3SP_NO2_5F C NO2 Sensor DESCRIPTION SPEC's printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPEC's printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size. 3SP_NO2_5F C NO2 Sensor BENEFITS * NEW Onboard Filter Removes Ozone!!! * NEW More Stable with T & RH!!! * Small Size with Low Profile (20x20x3 mm) * Long Life (10 years expected life) * Fast Response (< 15 seconds) * Low Power Consumption * ROHS Compliant 3SP_NO2_5F C NO2 Sensor APPLICATIONS * Air Quality Monitoring * Industrial Safety * Air Purification Control 3SP_NO2_5F C NO2 Sensor SPECIFICATIONS * Measurement Range: 0 to 5 ppm * Resolution: < 20 ppb (instrumentation dependent) * Repeatability: < +/- 3 % of reading * Response Time T90: < 300 ( 200 seconds typical) * Sensitivity -25 mV bias: -30 +/- 15 nA/ppm * Expected Operating Life: > 5 years (10 years 23+/-3'C; 40+/-10% RH) * Operating Temperature Range: -40 to 50'C (-20 to 40'C recommended) * Operating Humidity Range - non-condensing: 0 to >95% RH (15 to 95% continuous) * Power Consumption: 10 to 50 uW (circuit & ambient NO2 dependent)
HTM226LF Temperature and Humidity Sensor Module DESCRIPTION Based on the rugged HS24LF resisitive humidity sensor, HTM226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the nodule's linear voltage output. HTM226LF Temperature and Humidity Sensor Module FEATURES * Full Lead free product * Calibrated within +/-5% @55%RH at 5Vdc * Small size and very cost effective * Miniature connector (JST) * 50kOhms +/-3% NTC temperature sensor @25'C * The best combination of cost effectiveness and performance * Stable, linear proportional voltage output from 0% to 95%RH * Stable and reproducible characteristics with temperature * High reliability and long term stability HTM226LF Temperature and Humidity Sensor Module APPLICATIONS * Air condition, Humidifier, Dehumidifier * Humidity controller, Humidity transmitter * Hygrometer, Hygro-recorder * Copying machine * Clock, Weather-forecast barometer
HM1520/HM1520LF Relative Humidity Sensor Description Based on the rugged HS1101LF capacitive humidity sensor, HM1520LF is a dedicated humidity transducer designed for measurements at low humidity. Direct measurement of dew point or water concentration can be easily obtained in really cost effective conditions. Direct interface with a micro-controller is made possible with the module's linear voltage output. HM1520/HM1520LF Relative Humidity Sensor Main features * Tubular form for through wall mounting * Not affected by water condensation * Full interchangeability * Typical 1 to 1.6 Volt DC output for 0 to 20% RH at 5 V DC supply * Calibrated, linear voltage for easy electronic interface * Controlled temperature dependency * Ratiometric to voltage supply Humidity sensor specific features * No affected by long period at low humidity values. * Patented solid polymer structure. * High resistance to chemicals. * Fast response time. HM1520/HM1520LF Relative Humidity Sensor Applications * telecommunication environment * Automotive cabin air control * Home appliances * Agriculture and environment protection * Industrial process control systems
