OD: 10 - 325mm WT: 1.0 - 30mm Length: up to 12m Application: Chemical, Petrochemical, Energy, Aerospace, Oil and Gas, Nuclear industries. Process method: Cold drawn, Cold rolling Finishing: Heat treatment, annealed, acid washing, manual and mechanical Chemical Analysis of Alloy 400(UNS NO4400) ASME SB127/AMS 4544 C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe 3Max 2.0Max .02Max .024Max .5Max 63Max 28-34 2.5Max Chemical Analysis of Alloy 600(UNS NO6600) ASME SB163/ASME SB516(inconel 600) W Nr2.4816 C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe .15Max 1.0Max .015Max .5Max 14-17 72Min .5max 6-10 Chemical Analysis of Incoloy800HTASME SB407 ASME407 ASME SB163 C Cr Ni Ti Al Fe Al+Ti Grain 0.06-0.1 19-23 30-35 0.15-0.6 0.15-0.6 39.5Min 0.85-1.2 5 or coarser
Inconel 600 is a nickelbase alloy with excellent carburization, and good oxidation resistance at elevated temperatures. The alloy is widely used in the heat treating industry. 600 alloy has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities. Grades 200 and 201 nickel are normally preferred for handling concentrated, high temperature caustic. However, when sulfur compounds are present as well, or for ammonium hydroxide service, 600 alloy is suggested. 600 alloy is subject to stress corrosion cracking in hot, concentrated caustic alkalies. To avoid stress corrosion cracking, the 600 alloy fabrication should be fully stress relieved prior to use. A minimum treatment of 1650°F for 1 hour is suggested, but 1800-1850°F for 1 hour preferred.
Name Nickel Sheet / Nickel Plate Standard ASTM, ISO, JIS, GB Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc. Dimension THK 0.5 ~ 60mm * W=2000mm * L= 8000mm Condition Annealed Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc. Certificate ISO 9001:2008, MTC or The Third Party
Name Nickel Bar / Nickel Rod Standard ASTM, ISO, JIS, GB Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc. Dimension Dia. 6 ~ 200 mm Condition Annealed Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc. Certificate ISO 9001:2008, MTC or The Third Party
Nickel carbonate basic for electroplating, catalysts, etc.
Nickle wire Origin Russia 6 million metre nickle wire Available in Dubai FOB Dubai
Nickel foam plate is a type of porous material made from nickel metal. It consists of a three-dimensional network of interconnected nickel fibers or filaments that form a highly porous structure. The foam-like structure of nickel foam plate provides a large surface area, high porosity, and good electrical conductivity, making it useful for various applications in fields such as energy storage, catalysis, filtration, and aerospace. Product parameter Material: Nickel Aperture: 0.3mm-7mm(can customized) Porosity: 63%-90% The Max Sound Absorption Coefficient: â?¥0.8 Bulk Density: 0.27-1.08 g/cm3 Size: Customized Feature 1. Quality and light: maximum surface area, specific gravity 0.2 to 0.3, 1/10 of water, and wood, aluminum, and iron. 2. The porous construction has an extensive frequency range of sound absorption. 3. Electronic wave shield: It is protected by a 90 dB or so thick electronic wave that is rather thin. 4. Processing performance: It is easily adhered, decreased, and bent. 5. High temperature fire resistance: The stable form burns at a high temperature but is difficult to burn. 6. The ability to filter: The uniform three-dimensional network structure produces a filtering effect and permits extremely robust gas and fluid flow stability. Application 1.Nickel foam plate is a sound-absorbing material with excellent performance, which has a high sound absorption coefficient at high frequencies; the sound absorption performance at low frequencies can be improved through the design of the sound-absorbing structure. 2.Battery electrode material Nickel foam plate is the most common material used for battery electrodes, particularly for NiMH batteries. These rechargeable batteries are frequently found in hybrid cars, laptop computers, cell phones, electric scooters, and bicycles. 3. Fuel cell Foamed nickel can be used as an electrocatalyst for molten carbonate fuel cells, which typically operate at temperatures between 550 and 700 �° C. For proton exchange membrane production cells (PEMFC), electrode relay feeders for solid oxide fuel cells (SOFC), and electrode materials for electrolysis (as in water electrolytic settings), nickel foam plate can be utilized. Additionally, more surface area can be employed to produce syngas and hydrogen for fuel cells. 4. Other applications Magnetic flux conductors of magnetic particles in a fluid can be treated using nickel foam plate as a filter material. Applications to heat exchange medium and hydrogen storage media are among the further uses.
Products Description High-porosity metal nickel fiber felt is a patented product, which is a three-dimensional nickel felt made of metal nickel fiber developed in chemical and metallurgical processes. The purity of nickel fiber felt is 99.5%. It is a new material with light weight, good flexibility, adjustable porosity, and felt thickness. Metallic nickel felt is made of micron-sized pure nickel fiber in accordance with international technical standards, through a special felting process and ultra-high temperature vacuum sintering process. Compared with nickel mesh or nickel powder sintered plate, nickel fiber felt has a good three-dimensional network porous structure, high porosity, large specific surface area, uniform pore size distribution, strong corrosion resistance, good water permeability, good heat dissipation, and current density high, low voltage, stable performance, long life, and other advantages. Widely used in fuel cells, military industry, aerospace, civil, medical, and other industries. Especially hydrogen fuel cell diffusion media: anode diffusion layer (GDL) for proton exchange membrane (PEM) water electrolysis. Products parameters Brand: TOPTITECH Size: Customized on request Thickness: 0.2mm-2mm common thickness (0.25, 0.4, 0.5,0.6, 0.8, 1.0mm) Porosity: 60-70% (can be customized upon request) Shape(can be customized)ï¼? polygon, round, ring, disc, etc. Color: light gray Product Features 1. Good electrical conductivity 2. High mechanical strength 3. Good chemical stability 4. Strong corrosion resistance 5. Large specific surface area The fibers in the sintered fiber mat are overlapped with each other, and each fiber is welded with several fibers. The overlapping points are in a slightly fused state, and the entire fiber mat forms a complete conductive network with excellent electrical properties. And it also has a large specific surface area, which is mainly determined by the characteristics of the preparation process of the nickel fiber felt. The drawn fiber itself has a large surface area, and the fiber is laid into a net to form a network structure that is evenly overlapped with each other. Manufacturing flow Nickel wire Cluster drawing Nickel fiber Fiber shear Air-laid Sintering Nickel fiber felt Application fields Filter material Battery electrode material Heat exchange and adsorption materials
China Grade:N4,N6. America Grade:UNS N02201,UNSN02201. China Standard:GB/T2054 America Standard:ASTM B162 Supply status: annealed state (M), hard state (Y). Production process: cold rolling, hot rolling. Specification: (1) the thickness of the cold-rolled plate 0.8-6.0mm width 300-1300mm length 500-4000mm sanding, pickling surface. (2)Thickness of hot rolled plate 3.0-70mm width 300-2500mm length 500-8000mm matte, polished, frosted surface. Product characteristics: Pure nickel material has good corrosion resistance in the NaOH solution at any concentration and temperature and in the molten state of NaOH above 400C. Pure nickel materials have good corrosion resistance to Na2O2. Na2CO3, NaHCO3, and an alkaline solution or molten liquid containing KNO3. Main uses: for manufacturing chemical equipment such as pipe, heat exchanger, evaporator, heater, reactor, etc.; target materials for various coating; electrodes, etc.
Product characteristics: high temperature and high strength, strong plasticity. Main uses: industrial electric furnace, household appliances, far infrared device. Products can be customized, welcome interested customers to come to consult
Supply status: pull hard (Y) soft (M), squeeze (R). Shape: round bar, square bar, hexagonal bar. Manufacturing process: hot rolling, hot forging, grinding light. Supply status: pull hard (Y) soft (M), squeeze (R). Shape: round bar, square bar, hexagonal bar. Manufacturing process: hot rolling, hot forging, grinding light.
Inconel 625,Incoloy 825,Monel 400,Monel K500. Grade:UNS N06625,UNS N08825,UNS N04400,UNS N05500. Standard:GB/T 2882. Delivery status: soft state (M), hard state (Y). Surface state: black skin state, car light state, grinding state, pickling state. Specification: outer diameter 3.18-114.3mm, wall thickness 0.5-7.11mm, length 18000mm.
Available more than 100 KG (NICKEL WIRE) Price negotiable.
Nickel wire with the below specs for immediate sale : n/n : 03 Weight (net/gram) : 9136.0 Running Mtr. : 2076363.0 Bobbins : 40 Unit Price : 70$ n/n : 04 Weight (net/gram) : 9120.0 Running Mtr. : 2072727.0 Bobbins : 40 Unit Price : 75$ n/n : 05 Weight (net/gram) : 9285.0 Running Mtr. : 2110227.0 Bobbins : 40 Unit Price : 79$
Nickel ingots @ 99 purity . CIF Indonesia port to Busan Port ,Korea .
10 million meters of Nickel Wires. 0.025 dia. Available in UAE Dubai. Get in touch with me and we will discuss this further. I have all the compliance documents for the product.
Name: Capillary Pure Seamless Nickel Pipe (Nickel Sleeve, Nickel Micro Tube) OD 0.5~5.2mm, Thickness 0.05~0.5mm Packaing: Plastic Bag + Carton The capillary nickel pipe is used for pole of home lighting and infrared heating lamps, a main part in production. Production capacity: 20million pcs per month. It could be polished according to the customer's request. Standard: N4, N6, Ni200, Ni201.
We are specilaze in exporting titanium, nickel and zirconium metals and alloys, including various kinds of products. Hope to establish bussiness relationship with you, looking forward to your reply!
Application Fields : Titanium Anodes for Copper foil production Titanium Anodes for Chlor Alkali Cells Titanium Anodes for Chlorine Dioxide Cell Titanium Anodes for Caustic Potash Titanium Anodes for Water Electrolysis Titanium Anodes for Sewage Treatment Titanium Anodes for Cathodic Protection.
Our clients can avail from us, a quality approved range of Inconel products like Inconel pipes, tubes, fittings, flanges, sheet, plates, coils, fasteners and round bars. Inconel is a nickel-chromium alloy that is offered in grades such as Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625) and Inconel 601 (UNS No. N06601).
