Continuous tire pyrolysis plant is a new type of pyrolysis plant developed by DoingGroup on the basis of intermittent pyrolysis plant. The equipment adopts PLC control system and can feed continuously for 24 hours and continuously discharge slag. It is a continuously operated pyrolysis production line. Meet customer requirements for refinery efficiency. Continuous Tire pyrolysis plant Workflow: 1. The waste tire through the wire drawing machine out of waste tires in the wire. 2. Put the drawn steel tire into the tire crusher and break the tire into pieces. 3. The broken tire fragments into our continuous type of equipment, no longer need any operation, the device can automatically generate fuel. 4. Cracked carbon black, the system will automatically discharge the other end. The main advantages of continuous tire pyrolysis plant: 1. Accurately calculate the system to ensure full cracking, high oil yield. Indirect heating, long service life. 3. Continuous feeding, continuous slagging, saving time and effort. 4. Automatic, PLC control, save manpower. 5. Pyrolysis reactor with internal rotation device, without the need for regular pause to replace the sealing material. 6. Single handling capacity, small land area. Contact: Ms Bonnie Phone: +86-371-5677 1821 Mobile/Wechat/Whatsapp:0086-135-2669-2320 Skype: bonniezhao2 Email: oilmachine@doinggroup.com http://www.recyclingpyrolysisplant.com http://www.doinggroup.com
Plastic products, there are all aspects of our lives, on the one hand he brought convenience to our life; the other hand, from a variety of waste plastic generated garbage, but also to our living environment hazards. Based on the intermittent plastic pyrolysis plant, DoingGroup has developed a new type of fully automatic plastic pyrolysis plant. The equipment uses a precise calculation of cracking system, high degree of automation, continuous feeding, continuous slag discharge, 24-hour non-stop Run, without stopping the cooling and then slag. Working process: 1. The first plastic waste into plastic crusher, crushed waste plastic processing. 2. The broken plastic into the automatic continuous plastic cracking equipment. 3. Without any operation, you can get fuel. 4. Equipment produced in the reactor carbon black, will be automatically discharged at the end of the device. The main advantage: 1. Accurately calculate the system to ensure full cracking, high oil yield. Indirect heating, long service life. 3. Continuous feed. Continuous slag discharge, saving time and effort. 4. Automatic, PLC control, save manpower. 5. Pyrolysis reactor with internal rotation device, without the need for regular pause to replace the sealing material. 6. Single handling capacity, small land area. Contact: Ms Bonnie Phone: +86-371-5677 1821 Mobile/Wechat/Whatsapp:0086-135-2669-2320 Skype: bonniezhao2 Email: oilmachine@doinggroup.com http://www.recyclingpyrolysisplant.com http://www.doinggroup.com
Plastic products exist in all aspects of our lives, ranging from small plastic playground equipment to small plastic bags, the emergence of plastic will undoubtedly make our lives more colorful! But it is undeniable that waste plastic also brings a lot of trouble to our life. DoingGroup has developed a waste plastic cracking equipment, the use of high-temperature pyrolysis principle, the waste plastics cracked into fuel, carbon black, combustible gas process. DoingGroup's waste plastic cracking equipment workflow is as follows: 1. Use mechanical waste tires to enter the reactor and close the inlet to prevent gas flow out. 2. Carbon, wood or fuel heating reactor, the reactor is generally 200-300 degrees is the beginning of the cracking reaction, when the waste tires vaporized into oil vapor. 3. The hydrocarbons entering the condensing system are liquefied into oil and collected in the tank unit. Our system has a negative pressure device, he can greatly enhance the production of pyrolys is oil. 4, liquefied petroleum gas that can not be liquefied under atmospheric pressure is returned to the reactor as fuel for combustion, which is not only energy saving and environmental protection. 5. After the completion of oil production, the reactor will be cooled. When the temperature drops to 40 degrees, the carbon black and wires will be removed automatically or manually. Nearly RMB ten thousand yuan of revenue can be gained from running one of our equipment in a day, mainly from pyrolysis fuel and carbon black. They have the wide range use in dailylife: Fuel: Mainly used in steel plants, boiler heating, heavy oil generators, cement plants. Carbon black: mainly used for pressure ball burning, refining flour. Which refined flour and can be used for new tires, rubber soles, pigments of raw materials. DoingGroup's fee plastic cracking equipment is so popular, high oil yield, high yield is one reason, but also because of the following advantages of the device: 1. Reactor is produced according to the pressure vessel production standards, using 16mm thick boiler special steel and arc pressure head, can withstand high temperature and pressure. 2. High standard 3-step welding process, not easy to crack, long service life. 3. Pinion rotation device, small power, does not directly contact the reactor, heat transfer less easily deformed. 4. The tertiary cooling system uses a tube condenser, which is the most commonly used and best performing condenser in the oil industry. Make sure that the fuel vapor is sufficiently cool and produces high amounts of oil. 5. Safety devices have oil-water separator, water seal, vacuum device. To ensure safe and stable operation of equipment. Contact: Ms Bonnie Phone: +86-371-5677 1821 Mobile/Wechat/Whatsapp:0086-135-2669-2320 Skype: bonniezhao2 Email: oilmachine@doinggroup.com http://www.recyclingpyrolysisplant.com http://www.doinggroup.com
With the improvement of living standards, the car has become one of the essential means of transport for people traveling. On the one hand, it brings great convenience to our life. On the other hand, the waste tires on the car also pose a great threat to our living environment. In response to this serious social problem, DoingGroup uses pyrolysis principle to crack waste tires into fuel oil, carbon black, steel wire and combustible gas. Waste tire pyrolysis equipment by people from all walks of life at home and abroad more and more attention and praise. Our waste tire pyrolysis is so popular because it has the following advantages: 1. Our pyrolysis reactor is made according to the pressure vessel production standards, using 16mm thick boiler special steel and arc compression head, can withstand high pressure and high temperature. 2. High-standard 3-step welding process, not easy to crack, long service life. 3. Pinion rotation device, power is small, not directly contact the reactor, less heat transfer, not easy to deformation. 4. The three-stage cooling system uses tube condensation, also known as a heat exchanger, and is currently the most commonly used and best performing condenser in the oil industry. Can ensure that the cracked oil and gas fully cooled, high oil yield. 5. Our equipment has the following safety devices: water separator, water seal, vacuum device. They can prevent oil and gas from flowing backwards Pyrolysis, also known as pyrolysis, pyrolysis, pyrolysis, pyrolysis, refers to the pyrolysis of organic matter in an oxygen-free environment, and is a chemical process that converts one sample to another. Waste tire pyrolysis equipment is the process of pyrolysis of waste tires into oil, non-condensable gases and carbon black and steel wire by heating at high temperatures. The final product of waste tire cracker is fuel oil, carbon black, steel wire and combustible gas. These materials have a wide range of uses in our life and can be used in a variety of industries. Fuel oil : Can be used in steel mills, cement plants, boiler heating, heavy oil generator combustion heating. Carbon black: can be used for pressure ball burning, and refining flour. Which refined flour and can be used for new tires, rubber soles, pigments of raw materials. Steel wire: Can be used for scrap recycling and re-casting. Combustible gas: will be recycled back to the equipment for reactor heating. Our equipment has different specifications, designed for each customer's different needs of different capacity, customers can choose according to their needs and budget. Any questions about the machine, please feel free to contact us. -
According to statistics, in 2013, the amount of waste tires produced in China was 10.18 million tons, and it is estimated that more than 20 million tons will be exceeded in 2020. Where is the growing number of used tires? In response to this social problem, DoingGroup used chemical cracking reactions, R & D out of waste tire cracking equipment. Our waste tire refining equipment, by more and more people's attention, every day from around the world to visit our factory visit our equipment, our equipment is so popular, is Because of its following advantages: 1. Reactor is produced according to the pressure vessel production standards, the use of 16mm thick boiler steel pipe and arc pressure head, can withstand high temperature and pressure. 2. High standard three-step welding process, not easy to rupture, long service life. 3. Pinion rotation device, small power, no direct contact with the reactor, heat transfer less easily deformed. 4. Three-stage cooling system with tube condenser, is the most commonly used in the oil industry, the best performance of the condenser. Make sure the fuel vapor is fully cooled and produces high volumes of oil. 5. Safety devices have oil-water separator, water seal, vacuum device. To ensure safe and stable operation of equipment. Refinery equipment process: 1, First of all, the waste tires from the feed door into the host reactor, close the feed door, sealed. Heat the main furnace with fuel coal or wood in the heating chamber. 2, When the temperature reaches 220 , oil and gas precipitation, into the buffer chamber, residual oil (containing some slag) sink to the residue tank. 3,Light oil automatically enters the cooling system, condensed into oil. 4 Non-condensable gas, it will return to the reactor, as the heating reactor fuel. After the above process, you can get fuel, carbon black, steel wire, combustible gas, which cracked the material from the waste tires has a wide range of uses: 1. Fuel oil can be used in steel mills, boiler heating, heavy oil power plants and cement plants to produce refined diesel for further processing and diesel generators, light fuels, heavy machinery. 2. Carbon black can be used for pressure ball burning, refined toner. Can be used for new tires, rubber soles, pigments made of refined toner. 3. Steel wire is mainly used for scrap recycling, and re-cast into other steel. 4. Combustible gas is mainly used for circulating heating reactor. Outstanding highlights of our equipment is energy saving, low investment and high yield. Market prospects will be more and more broad, any machine problems, please contact us !!!
Now cars have become the basic means of transport for people. On the one hand, it brings convenience to our life. On the other hand, the waste tires on automobiles also bring great harm to people's living environment. In order to ease the energy crisis and reduce environmental pollution, Dongying Group developed the waste tire refining equipment by using pyrolysis principle. Pyrolysis is a thermochemical decomposition of organic material at elevated temperatures in the absence of oxygen (or any halogen). It involves the simultaneous change of chemical composition and physical phase, and is irreversible. The word is coined from the Greek-derived elements pyro â??fireâ?� and lysis â??separatingâ?�. It is causing more and more social attention and praise due to its own advantages as follows: 1. Turn waste into treasure Plastic pyrolysis is the latest technology of DoingGroup. It can transform waste plastics into pyrolysis oil, carbon black and combustible gas through pyrolysis chemical reaction. These converted substances have a wide range of uses in our lives. At the same time, it is also very beneficial to our environmental protection because of the reprocessing of waste, reducing their environmental pollution. 2. High oil production rate Our plastic pyrolysis can be used for 18 different raw materials, they will have a different amount of oil. Equipment with negative pressure device, it can not condensate oil vapor circulation filtration condensate system, so as to achieve the maximum amount of oil. After our many accurate measurements, the average oil yield of 60%. 3. Safe and environment friendly. Our plastic pyrolysis for sale to provide buffer tank, vacuum device, water seal these safety devices to ensure that equipment is safe and efficient operation. And our plastic pyrolysis with oil-water separator and dust deodorization equipment, which can effectively deal with the waste gas generated during the operation of waste equipment. These advantages make this device every day there will be nearly 10,000 RMB in revenue, and the market prospects are very broad. Through this equipment cracking reaction and condensation system, will produce a lot of fuel oil, carbon black, combustible gas. They are used in all walks of life. Fuel oil: steel plant. Boiler heating. Heavy oil power generation. Cement plants, but also further refined pyrolysis oil can also be used for diesel generators. Lightweight fuel. Heavy machinery Carbon black: pressure ball burning. Refined toner. Refined toner which can be used for new tires, rubber soles, paint manufacturing.
Plastic pyrolysis oil is the chemical technology that converts plastic waste into pyrolysis oil, carbon black and hydrocarbon gases. The reaction takes place inside the pyrolysis reactor. The following is the reaction of the specific process: 1. Use mechanical waste tires into the reactor, closing the entrance to prevent gas from flowing out. 2. Carbon, wood or fuel heating reactor, the reactor generally reach 200-300 degrees is the beginning of the cracking reaction, when the waste tires vaporized into oil vapor. 3. Oil and gas into the condensing system, liquefied into oil, was collected to the tank device. Our system has a negative pressure device, he can greatly improve the production of pyrolysis oil. 4. The liquefied petroleum gas that can not be liquefied under normal pressure will be returned to the reactor as fuel for combustion, which not only saves energy in environmental protection. 5. After completing the oil production, the reactor will be cooled. When the temperature drops to 40 degrees, the carbon black and wire will be removed automatically or manually. This technology has not only solved a long time, a variety of difficult to degrade the pollution of the environment on the issue of pollution, and after pyrolysis of the new energy source can ease the energy crisis, has been widespread concern and praise from all sectors of society. But also because of its own advantages: 1. Standard pressure vessel, Q245R standard boiler plate steel, the thickness of 16mm. 2. Seamless welding process, not easy to crack, long service life. 3.360 degree omnidirectional insulation cover, thermal insulation effect is more prominent. 4. A negative pressure, water seal device to ensure safe and efficient operation of equipment. And negative pressure equipment can increase the oil rate. 5. Environment friendly, energy efficient. Our equipment has a special dust deodorant device that can achieve the waste liquid waste disposal, will not cause any harm to the environment. These advantages make this device will have nearly 10,000 yuan a day income, the market prospects are very broad. Through this equipment cracking reaction and condensation system, will produce a large amount of fuel oil, carbon black, combustible gas. They are used in all walks of life.
Plastic products are widely used, everywhere plastic waste. There is a serious impact on our environment from both visual pollution and potential hazards. Visual pollution means the aesthetic perception of a living city that is affected by waste plastic everywhere. Potential hazards mainly refers to waste plastics resistant to degradation, affecting crop nutrient and water absorption, reduce production; otherwise, animals will be unconscious death. The recycling of waste plastics has increasingly become an important part of environmental protection. DoingGroup has developed a waste plastic processing equipment in addition to plastic waste. The device can also handle waste solid waste organic waste such as waste tires / waste rubber / waste acrylic / garbage / medical waste / oil shale, the operation of the device is as follows: 1. Use mechanical waste tires into the reactor, closing the entrance to prevent gas from flowing out. 2. Carbon, wood or fuel heating reactor, the reactor generally reach 200-300 degrees is the beginning of the cracking reaction, when the waste tires vaporized into oil vapor. 3. Oil and gas into the condensing system, liquefied into oil, was collected to the tank device. Our system has a negative pressure device, he can greatly improve the production of pyrolysis oil. 4. The Liquefied Petroleum Gas That Can Not Be Liquefied Under Normal Pressure Will Be Returned To The Reactor As Fuel For Combustion, Which Not Only Saves Energy In Environmental Protection. 5. After Completing The Oil Production, The Reactor Will Be Cooled. When The Temperature Drops To 40 Degrees, The Carbon Black And Wire Will Be Removed Automatically Or Manually. The Device Is Not Only Able To Degrade The Plastic Waste In Life, Reduce Environmental Pollution, But Also Produce More Renewable Energy To Ease The Energy Crisis, More And More Because Of Its Own Advantages As Follows: 1. Reactor Is Made According To The Standard Of Pressure Production, Using 16mm Thick Boiler Special Steel And Arc Compression Head, Can Withstand High Pressure And High Temperature. 2. 2 High-standard 3-step Welding Process, Not Easy To Crack, Long Service Life. 3. Pinion Rotation Device, Power Is Small, Not Directly Contact The Reactor, Less Heat Transfer, Not Easy To Deformation. 4. The Three-stage Cooling System Uses Tube Condensation, Also Known As A Heat Exchanger, And Is Currently The Most Commonly Used And Best Performing Condenser In The Oil Industry. Can Ensure That The Cracked Oil And Gas Fully Cooled, High Oil Yield. 5. Safety device oil-water separator, water seal, vacuum device, to ensure safe and efficient operation of equipment.
Dongying group is famous for cracking the industry in china, is committed to the cracking of waste plastic pyrolysis plant.The study found that achieving recycling of rubbish is not only environmentally friendly, but also creates greater economic benefits. Plastic pyrolysis plant working process: Our plastic pyrolysis plant, mainly through the rotation of a variety of waste plastics, so that it can be broken down into heavy oil, combustible gases and carbon black and other resources can be used. The oil or vapor passes through the plant's condensing unit, a portion of which condenses into a liquid oil and flows into the tank. The other portion of the non-condensable gas is recycled as fuel for the reactor. Our equipment comes standard with a dedusting and deodorizing unit, and according to the customer's needs, we can additionally dispose more specialized deodorizing plastic pyrolysis plant. As a result of waste tire pyrolysis oil equipment, pyrolysis oil, carbon black, steel wire, non-condensable gases can be extracted. Cracking oil can be used in steel mills, boiler heating, heavy oil generators, fuel oil for cement plants. And refined oil for further refining of pyrolysis oil can be used for diesel generators, light fuel, heavy machinery. Steel wire is used for scrap recycling and re-casting. Creating a broad market prospects for environmental protection, the reason why our equipment is so popular, it should have the following other irreplaceable advantages: 1. Reactor with q245r steel, steel thickness 16mm. 2. Using seamless welding technology, external insulation cover 3. Scientific and efficient air pressure cycle system, a negative pressure safety devices to reduce the risk
Waste tire pyrolysis oil equipment is through the oxygen-free environment, the decomposition of waste tires pyrolysis, converted to oil and gas. Non-condensable gases and carbon black process. The unique advantages of waste tire pyrolysis oil equipment are as follows: 1. The reactor is a standard pressure vessel, rotary heating, heat more balanced 2. Low-pressure vacuum device, oil-water separator, safer. 3. Multi-channel condensing device, oil and gas filter cleaner. 4. Seamless welded steel, more secure and solid. Working principle: Waste tires in the reactor, heated at high temperatures, the waste tires for a pyrolysis reaction, broken down into oil and gas, non-condensable gases, carbon black, steel wire. And then through the waste tire refining equipment condensing device, oil-water separator, water seal, liquefied oil and gas into liquefied oil, into the tank. And dust deodorant device, more environmentally friendly, will not cause any pollution. As a result of waste tire pyrolysis oil equipment, pyrolysis oil, carbon black, steel wire, non-condensable gases can be extracted. Cracking oil can be used in steel mills, boiler heating, heavy oil generators, fuel oil for cement plants. And refined oil for further refining of pyrolysis oil can be used for diesel generators, light fuel, heavy machinery. Steel wire is used for scrap recycling and re-casting.
Cone Ball mill is the key equipment for grinding after the crushing process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other grind-able materials. Working principle: The cone ball mill is horizontal cylindrical rotation device, driven by brim gearwheel. There are two chambers and grid. Material goes into the first chamber through the feeding inlet. Inside the first chamber, there are stage liners and ripple liners as well as steel balls. The shell rotates so as to generate electricity, and this force brings ball to a certain height and then balls drop down by gravity, the impact is the grinding force to the material. After the primary grinding, materials go into the second chamber through segregate screen. In the second chamber, there are flat liners and steel ball. After the secondary grinding, material is discharged from the discharging mouth. Then the whole grinding process is ended.
The Pak-Oerlikon Heavy Duty Milling Machine Model K6U is a robust and high-performance milling machine designed for industrial-grade precision and durability. This machine is ideal for heavy-duty applications in various manufacturing sectors, including automotive, aerospace, and engineering, where high accuracy and reliability are required. Product Brochure enclosed.
Diesel, paper, sugar, urea, heavy equipment, trucks.
Machinery, plastic, aluminum, iron and steel, automobile parts, ingersoll rand .
Stone crusher, grinding mill.
Heavy machinery.
Heavy machinery.
Machine Feature 304 body, the electric box is installed on the top, the machine table can be flushed, and the mold can be quickly changed. One machine can make a variety of products, with precise positioning and small cutting edges. PLC and human-machine interface operating system are adopted, and various parameter settings are intuitive and accurate. Easy to operate. Automatic quantitative filling, stable and reliable operation, excellent filling and sealing performance, high efficiency and wide applicability. Machine use :It is suitable for filling and sealing of various liquids, pastes, powders and other materials. Applicable industries: Suitable for beverages, daily chemicals, etc. Packaging containers :Plastic cups, bowls, boxes. Custom processing:customized according to the size and shape of the packaging container,packaging 1-6PCS at a time.
Ball mill, crusher, schematic deawing O, sand maker.
