silicon carbide ceramic beam as kiln furniture widely used for loading structure systems of high temperature industrial kilns. higher strength & no deformation even in 1700C Celcius working temperature, also longer life and excellent thermal conductivity make it save energy with less weight of the kiln car. #rsicbeam #rsicbeams #resicbeams #sicbeam #sicbeams
1650C working temp Material by: Recrystallized SiC advanced ceramic Formed by Slip Casting way Averaged Density: 2.72-2.82g/cm3 smaller thickness 5-10mm, but higher loading ability. To fit: shuttle & tunnel kilns of alumina, zirconia ceramics, honeycomb ceramic, foam ceramics eg.
Alumina based Sintered Magnesium aluminium Spinel is made from high-quality alumina and high-quality magnesium oxide, adopting a unique technique and sintering at high temperature above 1900 C. It has the characteristics of strong corrosion resistance, good slag resistance, high thermal vibration stability and high temperature resistance. Compared with the current market products, it has higher strength and bulk density, lower porosity and water absorption, so it has better high temperature performance.
Alumina based Sintered Mullite is made of high-quality alumina powder by special process and sintered at high temperature. The product has the characteristics of high fire resistance, good resistance to chemical corrosion and good thermal vibration stability, which is widely used in iron and steel smelting, ceramics, building materials, chemical industry, nonferrous smelting and other industries.
Fused Magnesium Aluminum Spinel is a new type of high-purity synthetic refractory raw material, which takes high-quality aluminum oxide powder and high-purity light burned magnesium powder as the main raw materials .It is made by melting at a high temperature above 2000 â?? and cooling in an electric arc furnace. It has the characteristics of large bulk density, low water absorption, high temperature resistance, small thermal expansion coefficient, good thermal stability, good appearance color, slag resistance and strong corrosion resistance. Fused Magnesium Aluminum Spinel is widely used in refractories, steel smelting, cement rotary kilns and glass industrial kilns. It is an ideal raw material for the production of high-performance castables, sliding nozzles, ladle lining bricks and other refractory materials and investment casting.
Zirconia Fused Alumina is smelted in the high temperature with Zirconia sand as the main raw material. Its characteristics are good tough texture, dense structure, high intensity, good thermal stability. As a high degree abrasive, it can make high performance grinding wheels to grinding steel, cast iron, metal and all kinds of alloy material. Moreover, Zirconia Fused Alumina is also high degree refractory material and ideal material for producing high performance intake and Zirconia Alumina Brick that makes glass fused kiln. Zirconia Fused Alumina: Brand Chemical composition(%) Al2O3 ZrO2 SiO2 TiO2 Fe2O3 ZA40 50 60 38 44 0.5Max 1.0 Max 0.2 Max ZA25 68 72 24 30
Hafnium carbide (HfC) is a gray metallic powder with a NaCl-type cubic crystal structure. It has the highest melting point among known single compounds. Hafnium carbide has high elasticity index, good electrical and thermal conductivity, very small thermal expansion coefficient and good impact resistance performance, widely used in hard alloy, aerospace, atomic energy, electronics, and high material technical field, such as hard thin film coatings. It is the most important basic materials of making a missile, rocket nozzle throat lining and satellite, spacecraft hood parts for thermal protection.
White fused alumina electrically fused in arc furnace with high grade processed alumina as raw material. It is characterized by high hardness, high purity, ability of self-sharpening, good ability of grinding and so on, it widely used for bonded and coated abrasives , polishing,precision casting and so on. Item Specification Colour white Crystal System trigonal system Mohs Hardness â?¥9 Melting Temperatureï¼?â??ï¼? 2150 Refractory Temperatureï¼?â??ï¼? 1950 True Density â?¥3. 50
Brown fused alumina melt film precision casting sand is based on the production of the brown fused alumina and with special technology, it is produced by the careful organization of the researchers. The quality has reached the advanced level of similar foreign products through laboratory tests and production in practice of dozens of casting enterprises. And some performances of it can be adjusted or showcased according to the customersâ?? requirement. The precision casting sand with high refractoriness, low thermal expansion coefficient, good thermal stability, strong air permeability, high intensity, easy to shell, high casting finish.It can substitute Zirconia sand (powder) its price is only half of zirconia sand (powder), and the recovery ratio is high as well. It can be mainly applied to the melt films and silicasol technology of jewelry, handicrafts, stainless steel products, watches, glasses, aluminum die casting industries, and can be processed in line with the demands of the clients.
BFA with high bulk density(can be washed as your requirement) Brown Fused Alumina with high bulk density is crashed by Barmac processing line. It is characterized by its high bulk density, high grinding ability,strong self-sharpening, good toughness, ultra-low content of the magnetic materials.
Accplast PHSW is Phosphate Bonded Non Wetting No Cement Refractory in India by Calderys refractories. This High CCS Lower Porosity Ready to Use Form has No Reaction With Sulphur, Non Wetting Characteristic, High Thermal Shock Resistance used for Reheating Furnace, Side Walls, Preheating Zone, Lower Heat Losses.
Mounted points Abrasive products made from Aluminium Oxide & Silicon Carbide by Vitrified Bond. Products are available in various sizes and shape in different grit size & colour.
Nama Barang / Produk : Garnet Natural Abrasif Jenis : Media Peledakan Tempat Asal : Cilacap Central Java, Indonesia Nama Merek : Abrasive GBI ( Garnet Blasting Indonesia ) Nomor Model : 8-14#/10-20#/20-40#/ 30-60# Penggunaan : Sandblasting, Pemotongan jet air Ukuran Butir Abrasif : 8-14#/10-20#/20-40#/ 30-60# warna : Dray Grin Aplikasi : Peledakan pasir Contoh : Tersedia Ketentuan Pembayaran : T/T, L/C FOB Pelabuhan Utama Indonesia Paket / MOQ : 25 Metrik Ton Kepadatan massal : 1.8-2.1g/cm3 Kekerasan : 7.5-8.0 MOHS Kata kunci 1 : Pasir Garnet Kata kunci 2 : Peledakan Pasir Garnet
Garnet is a natural product with chemically inert, non-toxic metals and crystalline silica. With its good hardness, garnet has been used as a gemstone and blasting abrasives. Features: Low Dust: The high intrinsic tenacity and a high proportion of the material itself fast the settlement rate and significantly reduce the dust emissions and dust coming from the workpiece, minimizing cleaning effort sandblasting, reducing pollution of the work area. Excellent Surface Quality: It can deep into the voids and uneven parts to clean, thereby completely remove rust, soluble salts and other contaminants; surface blasting process without inserts, will not adversely dimples and pits, easy access to 50-70 microns surface roughness. Recyclable: Its excellent tenacity and lower brittleness can lower damage rates and higher productivity. Depending on the specific application, it can be reused up to 3 times. Lower Production Costs: The paintâ??s adhesion and corrosion resistance depending on the cleanliness and surface roughness of the base material. Using garnet abrasive can greatly save the amount of paint by completely eliminate adverse spurs and pits. Improve Health and Safety: Its non-toxic characteristics can greatly reducing silicosis, leaching of metals or radioactive contamination risks. Application: 1. Blasting abrasives: Derusting of steel structure, hull, Bridges; 2. Water jet cutting: Cutting metal, stone, glass; 3. Grinding media: Grinding marble, optical lens, glass, leather and other materials; 4. Filter medium of chemical, petroleum, pharmacy, water treatment; 5. Coated abrasives of grinding wheel, emery cloth, sandpaper; 6. Wear-resistant materials: Used in highway pavement, airport runway, prevent slippery, wear-resisting rubber paint.
Product Overviews Black silicon carbide is produced at high temperature in an electric resistance type furnace with quartz sand and petroleum coke as its main raw materials. Black silicon carbide is fragile and sharp, and has certain electrical and thermal conductivity. It have been used for processing glass,refractory materials,ceramic,stone,cast iron and other metal. Advantages: (1) Special treated products get higher purity, better toughness, and better grinding effect (2) Higher purity and less impurities (3) Chemical washed and water washed good cleanness. (4) Good hardness,Corrosion resistance The chemical index SIC 97-99 F.C 0.2-0.3 Fe2O3 0.3-0.8 Application: 1.Coated the inner wall of water wheel, impeller, cylinder to provide abrasion resistance and prolong life.
Product Description lapping granules black silicon carbide sandblasting is quartz sand, petroleum coke in primary raw materials, smelting in the high temperature resistance furnace. Chemical&physical composition Color Black SiC 98.6%min F.C 0.15%max Standard FEPA JIS Fe2O3 0.20%max Mohs Hardness 9.15 Melting Point 2250 Specific Gravity 3.90g/cm3 min Maximum service temperature 1900 Material quarts sand and petroleum coke Size F16 F20 F22 F24 F30 F36 F40 F46 F54 F60 F70 F80 F90 F100 F120 F150 F180 F220 #16 #20 #24 #30 #36 #46 #54 #60 #70 #80 #90 #100 #120 #150 #180 #220 Product appliaction 1.grinding high-speed,high carbon steel 2.high-grade refractory materials 3.abrasives tool 4.grinding and polishing 5.ceramics 6.sandblasting 7.aviation 8.wire-electrode cutting Product Packing Packaging Details 25kg PVC bags+1MT big bag. Port Tianjin/Qingdao Port
brown fused alumina bfa is bauxite, coke, anthracite as main raw materials, made more than 2000 degrees high temperature melting, hitches in arc through the mill grinding, plastic, magnetic separation to iron, screen is divided into a variety of particle size, dense texture, high hardness, particle formed globular.High consolidation is suitable for making ceramic, resin abrasive and grinding, polishing, sandblasting, precision casting, etc. Product Name Brown aluminum oxide grinding Material AL2O3 Color brown Standard JIS Grade Top Brade Rock Al2O3 >95 Packaging & Shipping Packaging Details 25kg PVC bags+1MT big bag. Port Tianjin/Qingdao Port
The technical ceramic alumina ball with the characteristics of high density,high hardness,low abrasion,good anti-seismic stability, corrosion resistanceis which can improve the ball milling efficiency of the ball mill, reduce the pollution of glaze slurry, improve the product quality and economic benefits of the enterprise that is made of selected high-quality raw materials, advanced molding technology and calcined in high-temperature tunnel kiln at 1600 �ºC. It is an ideal grinding medium for processing glazes, billets and various mineral powders. The technical ceramic alumina ball is used in the grinding process of ceramic glaze, including the grinding process of ball mill. The semi-finished glaze slurry after grinding by ball mill is put into the mixing mill for fine processing, so that it becomes glaze. Or put the glaze powder directly into the agitation mill for fine processing to make it into glaze. We can supply 65-70% alumina content classified as medium alumina ball, 75% - 80% alumina content called medium high alumina ball, and more than 90% alumina content is high alumina ball. Among them, the high alumina ball is subdivided into 90% porcelain, 92% porcelain, 95% porcelain and 99% porcelain.
Maheshwari A 99.9 aluminum oxide beads have a very high purity with an Al2O3 content of > 99.9% and with minor secondary components of < 1000 ppm. These beads are suitable for the preparation and wet grinding of high-quality aluminum oxide raw materials for e.g. special technical, electrical and optical components and high-purity coatings made from special suspensions. Very small beads down to 0.1 mm and sizes up to 60mm are available of this type. Technical Data: High purity 99.9 % Al2O3 Specific Weight 3.8 kg/dm3 Bulk Density 2.3 kg/dm3 Roundness 0.93 (ratio width/length (xmin/xmax)) Colour: White satin smooth Fields of application In the mining industry A 99.9 ceramic beads are used for the grinding of minerals and precious metals. Quality attributes The ceramic beads type A 99.9 have a dense sintered structure, a smooth surface, high roundness and high hardness.
Nardaly Garnet Ltd produce garnet powder 200mesh for sandblasting, waterjet cutting and polishing. Other mesh sizes available: 8/12mesh, 12/20mesh, 20/40mesh, 30/60mesh, 80mesh, 100mesh, 150mesh, 325mesh, 420mesh etc. Color: red to light yellow.
