Tempered glass, laminated glass, mirror, acid etched glass, fritted glass, float glass, reflective glass, low e glass, patterned glass, glass bottle, glass jar, glassware, glass tube, glass cup.
The leading, largest, renowned Borosilicate glass tubes manufacturer and exporter in China, about 60MT output every day from 3 furances, guarantee the quantities and the quality for your need, Welcome for the inquiry and discussion of the business cooperation.
we provide X-ray tube accessories like glassbulb, target , rotor cathode and so on. offering mechanical parts processing work according to customer's drawing and requirements .
We can produced glass tubes are made of vacuum glass different sizes.
Material: borosilicate glass tube Shap: cone shape, H shape etc. Size: small, large, customer design Color: clear, amber, blue, black, green, pink, purple, yellow, etc. Application: flowmeter, household electrical appliance
Difference between three high efficiency solar vacuum tube (effective tubes, high cold tube, high temperature special efficiency tube)and ordinary tube: Absorption of heat membrane layer is difference between these two kind of tubes. (Absorption of heat membrane layer is the key part of vacuum tubes.) Absorption of heat membrane layer of three high efficiency solar vacuum tube is interference membrane, common tube is gradient membrane. The difference is mainly for interference membrane and the gradient membrane distinction. 1. Fundamental distinction: membrane layer structure is different, the principle of the absorption of sun's rays result in differently. gradient membrane, for multilayer, its absorbing layer is generally 9 layers. It to the sun's rays are layered absorption, and its absorb the light performance gradually become tall. Because the gradient structure, launch with increasing temperature rise than work, that temperature in 300 to 500 C than when launch greatly increased. The aluminum ions and absorbing layer in high temperature condition, lively nature greatly enhance the, and develop a drift. This happened in the internal structure of membrane layer caused confusion, coating began to aging. In the long run, the high temperature condition, membrane layer can fall off, thereby affecting the vacuum tube heat efficiency and life integrating. Interference membrane, its absorbing layer altogether 2 layer, among two layer membranes, because the metal content between the different and interfere ratio effect, make absorption ratio increase, launch ratio decrease. Plus effect of reduce emission from minus reverse layer, thus achieve more higher absorptance and reducing the role of launch ,greatly improved collection thermal efficiency. 2.Features: Absorptance of three high efficiency solar vacuum tube increased by 12%, and launch reduced by 30 to 40 percent, the super absorbing, heat loss less, warming faster. Efficient tube, the super absorbing, thermal efficiency is high, warming faster, in the same light conditions, can create more and higher temperature water than common tubes ; high cold tube, copper ions for the launch of aluminum ion mantua, so low 0.2 thermal loss rarely, in high cold environment can still work normally. hot water turn out as usual under- 30 C. high temperature special efficiency tube, because the membrane layer stainless steel ion high temperature resistant, fight air drying. Membrane layer under the condition of the 400 C, not attenuation, not aging, discoloration. In the same light conditions, ordinary tube heat absorption is lower than three high efficiency solar vacuum tube, can't even meet requirements that wash bath; In lower temperature, heat loss is bigger, collection hot effect is reduced, affect the normal use; Especially in the empty sun over 270 C, membrane layer began to aging, fall off, absorption rate drastically reduce, life shortens greatly. 3.Technology: high temperature special effects tube, high cold tube, efficient tube used respectively to three target, double target, single target magnetron sputtering craft; Ordinary tube typically use the single target magnetron sputtering technology. 4, appearance: A, Mouth of tube, here membrane layer above 800 C high temperature condition sealing off part is inevitable. As high temperature special effects tube has high temperature resistant, only 1 cm long without membrane layer in mouth of tube, while others without membrane layer for without high temperature resistant, tube membrane layer falls off the length is about 2.5 cm B, Inner tube color: with macroscopic observation, high-temperature tubes and high cold tube for internal color is kermesinus (for membrane layers bottom is copper); the bottom And efficient tube and ordinary tube are white (for membrane layer bottom is aluminum). Anyhow, interference membrane is the new breakthrough basis of gradient on membrane technology ,it is the great innovation in coating technology progress and become current global, interference coating of the most advanced coating technology. But also to the vacuum coating technology bring epoch-making change. Especially with the high temperature effects made interference membrane, can also be used for cooling tube, dry, seawater desalination, opened up the update for vacuum tubes wider application fields. Solar collector tube introduction Feature: 1 Quality warranty :15 years Quickly thermal collecting efficiency. It works fine under cold weather and area. Three kind of solar collector: Common :evacuated collector tubes. High-efficiency: Three-target evacuated collector tubes: blue and black-golden High-efficiency: Three-target evacuated collector tubes: purple-golden (purple and golden) Solar evacuated collector tubes technical data: Dimension: 47: 58 Material of tubes: 3.3 high borosilicate: 3.3 high borosilicate Glass expansion ratio: 3.3¡¾0.1X10-6 k-1: 3.3¡¾0.1X10-6 k-1 Outer diameter of tubes: 47¡¾0.7: 58¡¾0.7 Inner diameter of tubes: 37¡¾0.7: 48¡¾0.7 Thickness of glass: 1.6¡¾0.15: 1.6¡¾0.15 Transmittance: 0.89: 0.89 Selective coating: SS-CU-AL-N/AL: SS-CU-AL-N/AL Adsorptivity: 0.86(AM1.5): 0.86(AM1.5) Emissivity: 0.080(80¡¾5): 0.080(80¡¾5) Vacuum degree: 5.0 X 10-3Pa: 5.0 X 10-3Pa Collecting performance under sunshine: 190m2/kw: 190m2/kw Hailstone resistance: 25mm: 25mm Start up fast and collect solar energy fully Unique super pure copper surface,allowing reflection and minimal heat loss. High level vacuum ensure operation under cold weather. Long time warranty to 15 years. 10pcs/Carton. Applications: superior heat resisting products and crafts. 15-20KG/Carton.
1. Transparent quartz glass tube Smooth, colorless and transparent, high purity íí(sio2í¦99.99%), corrosion-resistant (expect hydrofluoric acid), high temperature-resistant (intenerating point 1730íµ), good thermal-stability, good light-penetrability (over 93% of visible light), crystal capability(6 hour under the temperature 1400í+5íµ,crystal thickness is less than 100 micron), good insulating-ability, long-life and non-contaminative. Mainly used in protection of heaters, production of halogen tube, lamps. 2. Desoxy transparent quartz tube Nice appearance, good thermal property and mechanical strength, strict tolerance and low hydro-(í_5ppm).Used in mercury lamp, metal halite and other quartz lamps. 3. Non-ozone transparent quartz tube It can prevent high-density ultraviolet radiation by being added titanium-oxide with colorless surface and light-purple section. It can almost prevent ultraviolet radiation no more than 220nm, while penetrates over 83% of 253.7nm, which have strong bactericidal ability. So ití»s called "bactericidal" and "non-ozone" quartz. It is widely used in bactericidal lamp, treatment of water and so on. 4. Uv-filtering transparent quartz tube It has colorless or light-blue surface and light-purple section. Besides common property, it can filter ultraviolet radiation of 190-320nm to prevent harm to bodies. It can be used in most kinds of environmental lighting products.
1. The milk-white (pearl-white) quartz glass tube can be manufactured into different shape as circle, pear, u and so on. 2. Normal quartz heating tube Never be eroded, good insulating ability, safely used, fast falling of temperature, save energy. Used in sterilizing dresser, microwave oven, drinking fountain and some other home appliances. 3. Far infrared halogen lamps: Our halogen lamps are all made by ourselves including tungsten filament- twisting and shell producing. The output is up to 3000-5000pcs/month. They are mainly used in room heating and industrial baking. The using life is over 5000 hours with good appearance and high quality. They can be manufactured into different shape as straight, round, circle, u and so on. All the products are made with fine tungsten filament as heating element, different quartz glass tube (transparent, uv, colored, milk-white) as shell, and filled halogen-tungsten gas to prolong the life.
Dark-red and golden quartz tube is a new kind of quartz material. Compared with common transparent quartz, it can absorb uv and most visible light and translate into infrared radiation. Compared with milk-white quartz, it can penetrate infrared radiation, which can load several times of energy per area. Compared with coated quartz, it is low-cost and high-stability. So it is an excellent material for producing infrared heater. Ití»s suitable for high-power and small-volume infrared heating products.
It has colorless or light-blue surface and light-purple section. Besides common property, it can filter ultraviolet radiation of 190-320nm to prevent harm to bodies. It can be used in most kinds of environmental lighting products.
Standard Size
1. Soda lime glass tube, lead glass tube, leads free glass tube for CFLs and EFLs. They have different length and O. D. 2. Competitively priced in China 3. High quality.
Clear and colored 3.3 borosilicate glass tubing & rods, neutral galss tube and rods, soda lime glass tube and rods.
The borosilicate glass we supply is produced though advanced electric melting glass furnace, laser surface control machine, sealed feed channel, Virola tube. We apply international advanced technical and fabricate skills to produce borosilicate glass with different specifications.
1) Available colors: dark blue, light blue, amber, light yellow, green, pink, purple, red and opaque blackú¼transparent black, gold champagne color new color. 2) Regularly stocked tubing size (diameter x wall thickness): Heavy wall tubing :( ten colors) 25 x 4mm, 32 x 3.2mm, 32 x 4mm, 38 x 3.2mm, 38 x 4mm, 44 x 4mm, 51 x 4mm, 51 x 4.8mm (standard length of tubingú¦1220mm) Light wall tubing :( amber, blue, green colors) 25x1.6mm, 30x2mm, 35x2mm, 40x2mm, 50x2mm, 55x2mm, 55x2.5mm, 60x2mm, 60x2.5mm, 70x2mm, 80x2mm, 85x2mm, 90x2mm, 100x2mm, 110x2.2mm, 120x2.5mm Inner profile tubing (amber, blue, green colors) 30x1.8mm, 35x1.8mm, 40x1.8mm, 45x1.8mm
Dimension: OD 1.0mm~ ª+ 5.0mm ID ª+0.5mm~ ª+ 4.0mm L: 1mm~100mm Material:Pyrex 33 Main purpose: collimator,isolator OD:2.78mm; ID:1.81mm, L:7mm
Borosilicate glass is a type of glass with the main glass-forming constituents silica and boron oxide. Most borosilicate glass is flat borosilicate floated glass sheetú¼pressed glass and glass ceramic. Colored borosilicate. In addition to the quartz, sodium carbonate, and calcium carbonate traditionally used in glassmaking, boron is used in the manufacture of borosilicate glass. Typically, the resulting glass composition is about 70% silica, 10% boric oxide, 8% sodium oxide, 8% potassium oxide, and 1% calcium oxide (lime). Wooden case
Opaque quartz glass tube With the adoption of distinctive technique, our opaque quartz glass tube has its typical characteristics of good visual aspects and stable physical &chemical properties. It serves as material of infrared heating for heaters, micro-wave oven, electrical baking oven, car paint baking, steriliztion container and other consumptive and industrial infrared application. Further processing of trim cutting, bowing, firepolishing can be done according to the demanding of the customers. Carton
Fiberglass tubes for tool handles Pulwell tubes are manufactured by pultrusion process with fiberglass continuous strand mat or by pullwinding process with helically wound fiberglass and offer excellent performance in all types of applications and conditions. Fiberglass/carbon hybrid products are also avaliable. The tubess are lightweight and strong, incorporating a non-woven fabric layer that withstands impact, abrasion, and tough use. The surface offers a pleasant and firm grip. Pulwell handles offer significantly improved properties compared to steel, aluminum, pvc, and wood. Pulwellf+s tubes are designed and used for:Lighting poles Flag poles Shovels Rakes Lopping shears Pruning shears Paint rollers Brushes Telescopic poles Pallet package
Translucent quartz glass tube They are clean and smooth, high purity (si02fª99.8%), stand cautery (expect hydrofluoric acid), stand high temperatrure (intenerate point 1650), good heat stablity, good transmition (even at infrared spectrum), insulated well, long life and without pollution. Mainly used in kinds of far infrared heating and drying facilities.
