Magnetic Stirrer
Digital LCD Display
Last Measurement in Memory
Heating amp Stirring can proceed Simultaneously
Bushless Motor for Low Noise
Anti scratch and Corrosion Resistance
Ceramic Plate Surface
ABS Cabinet
Brand Labtical
Model NameNumber MS5LH
Type Magnetic Stirrer
Speed range 1002000rpm
Maximum mixing capacity 5000 mlÂ
Temp Range amp Accuracy 300C Accuracy 1C
Temperature Sensor PT100
Time range 099h99minÂ
Top Plat Size 168 x 168mm
Display LCDÂ
Motor Type Bushless Motor
Operating Mode Temperature Speed Timing Memory last dataÂ
Power 500W
Power Supply AC 220V 5060Hz
Packing Dimension 335 x 235 x17cmÂ
Weight 25kg
Product description
[rcdk suspended magnetic separator]
Brief
Rcdk suspended magnetic separators are utilized for removing various ferrous contaminants from a flowing product stream.
They are those permanent magnets which are installed above the open conveyors to clear the ferrous objects and fines found in grains, feedstuffs, dry chemicals and other particulates. The metallic contaminants are usually pulled out by the suspended magnets.
Rcdk suspended magnetic separators come in different sizes matching to the width of the belt. They are outfitted with eyebolts for handling the overhead suspension. The magnets used in suspension are normally ceramic magnets or rare earth magnets which have the capability to lift the tramp- iron objects from considerable distance.
Features
Clear the tramp iron and other ferrous tramp from flat-belt and trough style conveyors.
The conveyed materials on the conveyors are penetrated deeply by the powerful ceramic or other magnets.
Magnetic damper coil winding components tension control magnet damper
Introduction of the magnetic damper
1. The magnetic damper and name tension controller, tension control or brake, is a constant torque transmission medium of the magnetic field of the device.
Damping disk with magnets, no sliding friction without contact, the service life is long, tension control extremely stable.
2. Installation simple structure, the output torque is a convenient adjustment.
3. Structure compact design, small size, can be in all sorts of steady work position.
Usage of Magnetic Damper
Recommends that customers will scale value transferred to use 4 or above, if this time tension too large, had better choose a smaller size specifications of damper. If in scale value below 4, may have used the pulse of the force. Please click HouXiang 3 stated way eliminate pulse. Loosen screw, will turn to 10, turn the scale axis at the same time slow will scale turn to 0, and then turn to Scale needed to tighten lock screw, value. If use appeared in the process of tension, please repeat the above phenomenon pulsation adjustment method 3 steps until the satisfied tension. Damper magnet produce media magnetic field, use material, the use of large brittle do not open it, lest attaint parts.
Specification of magnetic damper
Model Applied wire diamiter(mm) Tension scope(cn)
MTB-02 0.04_ 0.08 10g_ 50 g
MTB-03 0.09_ 0.15 40g_ 150 g
MTB-04 0.16_ 0.50 160g_ 1200 g
MTB-05 0.40_ 1.00 200g_ 2000g
MTB-06 1.00_ 3.00 800g_ 3600g
MTB-08 3.00_ 6.00 3600g_ 6500g
Advantage of our coil winding components magnetic damper
1. Precise tension of magnetic damper
2. Competitive price of magnetic damper
3. Excellent quality of tensioner
4. Various kinds of tensioners for choosen including mangetic tension, electronic tensioner,
Mechanical tensioner and servo tensioner.
5. Fast response speed
6. Professional tensioner engineering team
7. Good after-sales service
11947 Magnets Magnetic Products Suppliers
Short on time? Let Magnets Magnetic Products sellers contact you.
nSintered NdFeB magnets (neodymium magnets) are the most powerful magnets with high coercive force and high energy. It is getting to replace the traditional magnets of hard ferrite, AlNiCo and SmCo in many fields, and have been widely applied to motors, wind generator, magnetic separator, speaker systems, transducer, MRI, auto industry, etc.
NdFeB Magnetic
51 x51 x 22 mm
Weight 0.43 kg
Nickel-plated (Ni-Cu-Ni)
Magnetisation: N35
Strength: Approx. 215 Kg
Extra strong (N35) magnets. These magnets are often used by model airplane builders. Heat resistant up to 80 degrees Celsius.
NdFeB Magnetic mainly comprised of neodymium, iron and boron, is the third generation of the rare-earth permanent magnets, Sintered NdFeB is the strongest permanent magnets in the world up to date, It has excellent properties of high remanence, coercivity, and Max. Energy product.
NdFeB Magnetic grade
N35, N38, N40, N42, N45, N48, N50, N52(Max. Operational temperature: 80c)
N33SH, N35SH, N38SH, N40SH, N42SH(Max. Operational temperature: 150c)
N28UH, N30UH, N33UH, N35UH, N38UH(Max. Operational temperature: Up to 180c)
N28EH, N30EH, N33EH, N35EH(Max. Operational temperature: Up to 200c)
N30AH, N33AH, N35AH(Max. Operational temperature: Up to 230c)
NdFeB Magnetic Outsanding product:
1). High performance: N52, N48M, 48SH, 42UH, 38EH, 33AH
2). High working temperature: The AH series with 40 k Oe super-high coervice force can replace SmCo magnets successfully.
3). High consistency: The cpk of Br and Hcj are much higher than 1.67 the consisitency of surface magnetic field and magnetic flux can be controlled with +/-1%
4). High Anti-corrosion: The sale spray test and humid heat test of the high anti-corrosion coating could be more than 1000 hours
5). Low weight loss
PCT: 130c, humidity 100%, vapor pressure 2.7 bar. 20 days, average low weight loss less than 2 mg/cm2
NdFeB Magnetic applications:
Loudspeakers, motor assemblies, windmill, Home appliance, acousics, communication equipment, toy, car, servomotor, step motor, DC motor and linear motor, mircrophones
Pros: Very strong hold when contacting another magnet or plain iron, very difficult to pull away (easy to slide however).
Pretty strong hold between two of these even with a couple of mm in between.
Cons: Would like thicker (and more powerful) versions. Sure u can stack these together but sometimes it's not the same thing.
Other Thoughts: Good for attaching thick stacks of paper to refrigerators etc or pinching together papers or textiles.
Bottomline: This is the one if you need strong cost-effective magnets
You are welcome to enquiry on our NdFeB Magnetic.
NdFeB Magnetic
51 x51 x 22 mm
Weight 0.43 kg
Nickel-plated (Ni-Cu-Ni)
Magnetisation: N35
Strength: Approx. 215 Kg.
We produce and sell ndfeb magnet in various shapes(segment, block, cube, cylinder, disc, ring, rod, sphere, etc)with different grade
Rare earth magnet:
1. Material: neodymium, ndfeb
2. Technology: utilizes new sintered ndfeb magnet techniques and equipment such as strip casting, hddr technology
3. Magnetic properties: high coercive force, the max operation temp is up to 200 degree centigrade or 380 curie temperature
4. Grades: n33-n52, 33m-48m, 33h-48h, 30sh-45sh, 30uh-38uh and 30eh-35eh
5. Shapes and sizes: various kinds or according to customers' request
6. Coatings: ni, zn, phosphating, epoxy and so on
7. Motor magnet applications: widely used in different applications, such as sensors, motors, rotors, wind turbines/wind generators, loudspeakers, magnetic hooks, magnetic holder, filters automobiles and so on.
HPMG start with alnico magnets, covers all applications.More than 10, 000 mouldings.1500 tons /year, share 40% of the world market.
Covers all grades from alnico2~alnico9
HPMG start with alnico magnets,with 35 years manufacturing experience covers all applications, more than 10,000 moudlings.
capacity 1500 tons/ year, share 40% of world market.
such as stripcasting, hddrtechnology;
9. Applications: sensors, motors, rotors, wind turbine, wind generators, speakers, loudspeakers, magnetic hooks, magnetic holder, filters, etc.
When inquiring, following information offered will be much appreciated .
1.Type of magnet (material & grade)
2. Quantity (annual and per shipment)
3. Shape and dimensions (drawing if necessary)
4. Direction of magnetization
5. Magnetized or not
6. Details of surface treatment
7. Application if possible
8. Other information or requirements
1) free samples
2) all industrial shaped magnets available
3) do as per your drawings
4)100% factory direct price
Note: oem service, high quality, fast delivery, best after-sale service
Flexible magnet is made of ferrite powder bonded with macromolecule compounds, such as CPE, NBR, CR, PVC, nylon, and PP etc. It is also called rubber magnet or plastic magnet because of its bond materials. It features in flexibility, and thus can be made into rolls, sheets, strips, blocks, rings and so on, through extruding, calendering, injecting, molding.
SmCo Equipment: Jet Milling,Isostatic Cool,Pressing machine,Tempering(annealing)furnace,Sintering furnace,Grinding machine,and testing equipment like CMM etc.
At present,we have delivered this high temperature magnet(420C and made magnet assembly to user.
Please send your requirements to cathyshenpeng at gmail dot com
MaximMAGNET makes quality Strong neodymium magnet block magnet for different kinds of applications, we aim to build a reliable brand name in magnetic industry.
Detailed specifications:
1.Size: Custom-made as per drawings/requirements;
2.Grade: 11.7-14.8kGs magnetic residual;
3.Performance: consistent magnetic flux, high coercive force, low temperature coefficient and low irreversible magnetic losses.
4.Coatings: Ni, Zn, NiCuNi, Epoxy, Nicu+Epoxy, NiCu+Sn, Passivation, Silver, Gold, Teflon, Everlube etc.
5.Applications: Motor assemblies, Automobile, Wind turbine/Generator, MRI, Speaker, IT industry, Sensor, Communication equipments, Scanner, Camera, Home appliance and so on.
Neodymium iron boron ( NdFeB) is a type of rare earth magnetic material.
NdFeB is the most advanced commercialized permanent magnet material available today.
This material has similar properties as the samarium cobalt except that it is more easily oxidized
and generally doesn't have the same temperature resistance.
However, NdFeB magnets have the highest energy products approaching 52MGOe and are
mechanically stronger than samarium cobalt magents. NdFeB material is more costly by weight than
ceramic or alnico but produces the highest amount of flux per unit of volume or mass amking it very economical for many applicantions. Their high energy products lend themselves to comnpact designs
that result in innovative applications and lower manufacturing costs.
Unprotected NdFeB magnets are subject to corronsion. Surface treatments has ben developed that
allow them to be used in most applications. These treatments include copper, silver,, gold, nickel,
zinc and tin plating and epoxy resin coating.
Beneficial characteristics of NdFeB magnets include their very high energy product, very high
coercive force, and moderate temperature stability. Drawbacks include lower mechanical strength,
and low corrosion resistance when not properly coated or plated.
Magnetic Grades and Temperature:
The Grade of a magent directly refers to the Maximum Energy Product of the material that composes the magnet. It in no way refers to the physical properties of the magnet. Grade is generally used to describe
how "strong" a permanent magnet material is. The energy products is specified in the unites Gauss Oersted.
One MGOe is 1,000,000 Gauss Obersted. A grade forty (N40) would have a Maximum Energy Product of 40 MGOe.The higher the grade the "stronger" the magnet.
Magnetic materials have a wide range of working temperatures. The following chart the various materials and their maximum working temperature. NdFeB material
NdFeB Magnet is the most powerful commercially produced magnets.
· NdFeB Magnet has a higher Maximum Energy Product, (BH).max, which can easily reach 30 MGOe and even goes
up to 50 MGOe.
· NdFeB Magnet can replace SmCo Magnets in most cases, especially where operating temperature is less than 80
degrees Centigrade.
· NdFeB Magnet has very high strength.
· Relatively low cost.
· Compared to Alnico and SmCo magnets, relatively easy to machine
Additional Info
Brand: CBNB
Transportation: Ocean,Land,Air
Place of Origin: China
11947 Magnets Magnetic Products Suppliers
Short on time? Let Magnets Magnetic Products sellers contact you.
