Shanghai United Metal Materials

Magnet Materials: 1)NdFeb material(Sintered and Bonded) 2)Hard Ferrite(Sr Ferrite and Ba Ferrite) 3)SmCo(1:5 and 2:17) 4)AlNiCo(Casting and Sintering) 5)Rubber Magnet 6)Soft Magnet(Mn-Zn and Ni-Zn) 7)Injection Magnet(NdFeB and Ferrite) Surface Treatment: 1)Plating (Ni, Zn, Cr,Cu,A.) 2)Coating(Epoxy Resin) 3)Spray Coating(Epoxy Resin) Our Main Product List: 1. Bonded NdFeB Magnets 2. Sintered NdFeB Magnets 3. Ferrites         > Sintered Hard Ferrite         > Soft Ferrite-MnZn ferrite         > Soft Ferrite-NiZn ferrite 4SmCo Magnets 5Cast and Sintered AlNiCo Magnets

Magnet materials: 1)ndfeb material(sintered and bonded) 2)hard ferrite(sr ferrite and ba ferrite) 3)smco(1:5 and 2:17) 4)alnico(casting and sintering) 5)rubber magnet 6)soft magnet(mn-zn and ni-zn) 7)injection magnet(ndfeb and ferrite) Surface treatment: 1)plating (ni, zn, cr, cu, a.) 2)coating(epoxy resin) 3)spray coating(epoxy resin) 1. Bonded ndfeb magnets 2. Sintered ndfeb magnets 3. Ferrites   > sintered hard ferrite   > soft ferrite-mnzn ferrite   > soft ferrite-nizn ferrite 4.Smco magnets 5.Cast and sintered alnico magnets

Magnet materials: 1)ndfeb material(sintered and bonded) 2)hard ferrite(sr ferrite and ba ferrite) 3)smco(1:5 and 2:17) 4)alnico(casting and sintering) 5)rubber magnet 6)soft magnet(mn-zn and ni-zn) 7)injection magnet(ndfeb and ferrite) Surface treatment: 1)plating (ni, zn, cr, cu, ar¦.) 2)coating(epoxy resin) 3)spray coating(epoxy resin) 1. Bonded ndfeb magnets 2. Sintered ndfeb magnets 3. Ferrites > sintered hard ferrite > soft ferrite-mnzn ferrite > soft ferrite-nizn ferrite 4 smco magnets 5 cast and sintered alnico magnets

Metal Injection Molding (MIM) is a high-tech near net shape technology to mass production of small metal parts with complex shape, high precision and performance requirement. MIM technology has its advantages over traditional powder metallurgy, machining, investment casting, and other alternative methods. MIM parts can now be found in all areas of life, from our cars and trucks to watches, dental braces, mobile phones, IT equipment, DIY tools and much more. MIM Unique Process: -Mixing Powder(metal powder and binder) -Injection Molding -Debinding -Sintering -Post Treatment(sizing, machining, heat treatment, plating)

Fully Machining Services: CNC Machining, CNC milling and turning parts , CNC milling parts, CNC lathe turning parts, grinding parts, stamping parts, casting and forging parts, assembly service. Surface Finishes:  Anodizing, Electroplating, Mechanical Polish, Electro Polishing, E-coating, Polishing, Powder Coating, Blacken, Hardening, Painting etc.

Fully Machining Services:  CNC Machining, CNC milling and turning parts , CNC milling parts, CNC lathe turning parts, grinding parts, stamping parts, casting and forging parts, assembly service.   Surface Finishes:  Anodizing, Electroplating, Mechanical Polish, Electro Polishing, E-coating, Polishing, Powder Coating, Blacken, Hardening, Painting etc.

Magnet Materials: 1)NdFeb material(Sintered and Bonded) 2)Hard Ferrite(Sr Ferrite and Ba Ferrite) 3)SmCo(1:5 and 2:17) 4)AlNiCo(Casting and Sintering) 5)Rubber Magnet 6)Soft Magnet(Mn-Zn and Ni-Zn) 7)Injection Magnet(NdFeB and Ferrite) Surface Treatment: 1)Plating (Ni, Zn, Cr,Cu,Ar?¦.) 2)Coating(Epoxy Resin) 3)Spray Coating(Epoxy Resin) Our Main Product List: 1. Bonded NdFeB Magnets 2. Sintered NdFeB Magnets 3. Ferrites         > Sintered Hard Ferrite         > Soft Ferrite-MnZn ferrite         > Soft Ferrite-NiZn ferrite 4. SmCo Magnets  5. Cast and Sintered AlNiCo Magnets

Powder Metallurgy (Metal compression molding) is the most cost effective of a number of possible options for making the part. * Very high and uniform purity can be easily achieved * the simple fabrication process retains purity * Grain size is easily controlled * No deformation is needed to produce directional elongation of grains * Void density can be controlled * Objects can be created in any shape * Shapes can be produced that not be made by any other process PM material refer to MPIF standard 35 No. class common grade 1 Iron and Carbon Steel F-0000 F-0005 F-0008 2 Iron-Copper and Copper Steel FC-0205 FC-0208 FC-0508 3 Iron-Nickel and Nickel Steel FN-0205 FN-0208 FN-0405 4 Prealloyed Steel FL-4205 FL-4605 FL-5208 5 Hybrid Low-Alloy Steel FLN2C-4005 FLN2-4405 FLNC-4405 6 Sinter-Hardened Steel FLN2-4408 FLNC-4408 FLC2-4808 7 Diffusion-Alloyed Steel FD-0205 FD-0405 FLDN2-4908 8 Copper-Infiltrated Iron and Steel FX-1005 FX-2005 FX-2008 9 Copper and Copper Alloys CZP-1002 CZ-3000 CT-1000 Surface Heat Treatment(Surface carburizing, nitriding, carburizing and high frequency quenching) -Black Oxide Finish -Immersion Oil -Electroplating

Magnet Materials: 1)NdFeb material(Sintered and Bonded) 2)Hard Ferrite(Sr Ferrite and Ba Ferrite) 3)SmCo(1:5 and 2:17) 4)AlNiCo(Casting and Sintering) 5)Rubber Magnet 6)Soft Magnet(Mn-Zn and Ni-Zn) 7)Injection Magnet(NdFeB and Ferrite) Surface Treatment: 1)Plating (Ni, Zn, Cr,Cu,Ar?¦.) 2)Coating(Epoxy Resin) 3)Spray Coating(Epoxy Resin) 1. Bonded NdFeB Magnets 2. Sintered NdFeB Magnets 3. Ferrites      > Sintered Hard Ferrite      > Soft Ferrite-MnZn ferrite      > Soft Ferrite-NiZn ferrite 4. SmCo Magnets 5. Cast and Sintered AlNiCo Magnets