NdFeB Magnetic
51 x51 x 22 mm
Weight 0.43 kg
Nickel-plated (Ni-Cu-Ni)
Magnetisation: N35
Strength: Approx. 215 Kg
Extra strong (N35) magnets. These magnets are often used by model airplane builders. Heat resistant up to 80 degrees Celsius.
NdFeB Magnetic mainly comprised of neodymium, iron and boron, is the third generation of the rare-earth permanent magnets, Sintered NdFeB is the strongest permanent magnets in the world up to date, It has excellent properties of high remanence, coercivity, and Max. Energy product.
NdFeB Magnetic grade
N35, N38, N40, N42, N45, N48, N50, N52(Max. Operational temperature: 80c)
N33SH, N35SH, N38SH, N40SH, N42SH(Max. Operational temperature: 150c)
N28UH, N30UH, N33UH, N35UH, N38UH(Max. Operational temperature: Up to 180c)
N28EH, N30EH, N33EH, N35EH(Max. Operational temperature: Up to 200c)
N30AH, N33AH, N35AH(Max. Operational temperature: Up to 230c)
NdFeB Magnetic Outsanding product:
1). High performance: N52, N48M, 48SH, 42UH, 38EH, 33AH
2). High working temperature: The AH series with 40 k Oe super-high coervice force can replace SmCo magnets successfully.
3). High consistency: The cpk of Br and Hcj are much higher than 1.67 the consisitency of surface magnetic field and magnetic flux can be controlled with +/-1%
4). High Anti-corrosion: The sale spray test and humid heat test of the high anti-corrosion coating could be more than 1000 hours
5). Low weight loss
PCT: 130c, humidity 100%, vapor pressure 2.7 bar. 20 days, average low weight loss less than 2 mg/cm2
NdFeB Magnetic applications:
Loudspeakers, motor assemblies, windmill, Home appliance, acousics, communication equipment, toy, car, servomotor, step motor, DC motor and linear motor, mircrophones
Pros: Very strong hold when contacting another magnet or plain iron, very difficult to pull away (easy to slide however).
Pretty strong hold between two of these even with a couple of mm in between.
Cons: Would like thicker (and more powerful) versions. Sure u can stack these together but sometimes it's not the same thing.
Other Thoughts: Good for attaching thick stacks of paper to refrigerators etc or pinching together papers or textiles.
Bottomline: This is the one if you need strong cost-effective magnets
You are welcome to enquiry on our NdFeB Magnetic.
NdFeB Magnetic
51 x51 x 22 mm
Weight 0.43 kg
Nickel-plated (Ni-Cu-Ni)
Magnetisation: N35
Strength: Approx. 215 Kg.
nSintered NdFeB magnets (neodymium magnets) are the most powerful magnets with high coercive force and high energy. It is getting to replace the traditional magnets of hard ferrite, AlNiCo and SmCo in many fields, and have been widely applied to motors, wind generator, magnetic separator, speaker systems, transducer, MRI, auto industry, etc.
We produce and sell ndfeb magnet in various shapes(segment, block, cube, cylinder, disc, ring, rod, sphere, etc)with different grade Rare earth magnet: 1. Material: neodymium, ndfeb 2. Technology: utilizes new sintered ndfeb magnet techniques and equipment such as strip casting, hddr technology 3. Magnetic properties: high coercive force, the max operation temp is up to 200 degree centigrade or 380 curie temperature 4. Grades: n33-n52, 33m-48m, 33h-48h, 30sh-45sh, 30uh-38uh and 30eh-35eh 5. Shapes and sizes: various kinds or according to customers' request 6. Coatings: ni, zn, phosphating, epoxy and so on 7. Motor magnet applications: widely used in different applications, such as sensors, motors, rotors, wind turbines/wind generators, loudspeakers, magnetic hooks, magnetic holder, filters automobiles and so on. With insulation packing with metal sheet .
1. Materials:sintered neodymium-iron-boron; 2.grades:n35-n52; n35m-n50m; n35h-n48h, n35sh-n45sh; n30uh-n40uh, n30eh-n38eh. Our advantage 1) free samples 2) all industrial shaped magnets available 3) do as per your drawings 4)100% factory direct price Note: oem service, high quality, fast delivery, best after-sale service Carton, according to your requirement
1)grade:N35-N52 2)size:customized design 3)Plating:Znic ,Nickel ,Epoxy sheild magnetism packing
such as stripcasting, hddrtechnology; 9. Applications: sensors, motors, rotors, wind turbine, wind generators, speakers, loudspeakers, magnetic hooks, magnetic holder, filters, etc. When inquiring, following information offered will be much appreciated . 1.Type of magnet (material & grade) 2. Quantity (annual and per shipment) 3. Shape and dimensions (drawing if necessary) 4. Direction of magnetization 5. Magnetized or not 6. Details of surface treatment 7. Application if possible 8. Other information or requirements Carton or according to your requirement
MaximMAGNET makes quality Strong neodymium magnet block magnet for different kinds of applications, we aim to build a reliable brand name in magnetic industry. Detailed specifications: 1.Size: Custom-made as per drawings/requirements; 2.Grade: 11.7-14.8kGs magnetic residual; 3.Performance: consistent magnetic flux, high coercive force, low temperature coefficient and low irreversible magnetic losses. 4.Coatings: Ni, Zn, NiCuNi, Epoxy, Nicu+Epoxy, NiCu+Sn, Passivation, Silver, Gold, Teflon, Everlube etc. 5.Applications: Motor assemblies, Automobile, Wind turbine/Generator, MRI, Speaker, IT industry, Sensor, Communication equipments, Scanner, Camera, Home appliance and so on.
About NdFeB magnet: Neodymium iron boron ( NdFeB) is a type of rare earth magnetic material. NdFeB is the most advanced commercialized permanent magnet material available today. This material has similar properties as the samarium cobalt except that it is more easily oxidized and generally doesn't have the same temperature resistance. However, NdFeB magnets have the highest energy products approaching 52MGOe and are mechanically stronger than samarium cobalt magents. NdFeB material is more costly by weight than ceramic or alnico but produces the highest amount of flux per unit of volume or mass amking it very economical for many applicantions. Their high energy products lend themselves to comnpact designs that result in innovative applications and lower manufacturing costs. Unprotected NdFeB magnets are subject to corronsion. Surface treatments has ben developed that allow them to be used in most applications. These treatments include copper, silver,, gold, nickel, zinc and tin plating and epoxy resin coating. Beneficial characteristics of NdFeB magnets include their very high energy product, very high coercive force, and moderate temperature stability. Drawbacks include lower mechanical strength, and low corrosion resistance when not properly coated or plated. Magnetic Grades and Temperature: The Grade of a magent directly refers to the Maximum Energy Product of the material that composes the magnet. It in no way refers to the physical properties of the magnet. Grade is generally used to describe how "strong" a permanent magnet material is. The energy products is specified in the unites Gauss Oersted. One MGOe is 1,000,000 Gauss Obersted. A grade forty (N40) would have a Maximum Energy Product of 40 MGOe.The higher the grade the "stronger" the magnet. Magnetic materials have a wide range of working temperatures. The following chart the various materials and their maximum working temperature. NdFeB material
China strongest neodymium magnet NdFeB magnets N35-N52 Neodymium magnet is also named NdFeB magnet,rare earth magnet or permanent magnet.it is kind of sintered magnet.Neodymium magnet is the strongest permanent magnet in the world so far,which belongs to the fouth generation magnet.Besides its powerful strength, it is very tractable,it can be machined into different shapes, sizes, or with countersink holes,or edge and corner processing. we can do custom magnet to meet your requirements. Specifications: Product:Neodymium magnet/NdFeB Magnet Grade:N33 N35 N38 N40 N42 N45 N48 N50 N52 Size:As per customer's request Shape:round/disc,block,Cylinder,Bar,Ring,Countersunk,Segment,Ball,hook,Cup, Trapezoid,custom shape) Surface Coating:Nickel, Zn, NiCuNi,Epoxy,Rubber,Gold,Sliver and so on Tolerance:±0.05mm Magnetization Direction:Thickness/Axially/Diametrally/Multi-poles/Radial Magnetized Sample: Available Lead time:5-8 Working days after payment Shippment: Express via DHL/FedEx/UPS,or by sea.Fast door to door service. Why choose us? 1.Professional neodymium magnet manufacturer and exporter since 2008. 2.Competitive price with high quality neodymium magnet with REACH, ROHS and SVHC Certificate. 3.High graded raw material to ensure the long-term stability of magnetic properties. 4.DHL, Fedex, TNT, sea shippment and Multi-channel transportation. 5.One-stop magnet solution provider from production to shippment. About us: Fourearth Magnet Co.,ltd is founded in 2008,Which is a leading manufacturer of high performance permanent magnet with ISO9001:2008, ISO/TS 16949 and ISO14001 certificates in China. Fourearth serves a variety of markets from consumer electronics, industrial automation, automotive, green energy, household appliances, medical, aerospace and telecommunications. Fourearth's magnets are used in motors, speakers, generators, sensors, compressors, MRI, magnetic chucks and separators etc. To meet the more and more demanding markets, Fourearth has been concentrating on manufacturing technologies for quality stability and cost reduction. Over the last ten years Fourearth export more than 90% of the magnets to American, European, Asian and African countries. With such wide range of magnetic material options, our professional technicians are available to help solve your magnetic needs and choose the most cost effective solution for you. Trust Fourearth and we won't let you down.
Magnetic name tag is composed of two parts, first if the wearing part, the other is magnetic part. Actually all tags can be replaced by magnetic one by adjusting the wearing methods. The magnets used in magnetic name tags are Neodymium disc magnets, because of their super strong magnetics, we do not need to worry about the lost of tags during daily works.