Novo Proof 100 HB: water proofing based on emulsion bitumen. Novo Proof 100 HB: is a high performance waterproofing applications over concrete and masonry surfaces. ADVANTAGES 1.Cold and easy apply. 2.Economy Waterproofing compared with hot type. 3.High water proofing to water, mouser and vapors. 4.High resistance to aggressive salts. 5.Applied on dry and damp surfaces. 6.Good adhesion on the surfaces. 7.Can be applied by brush, roller and trowel on horizontal and vertical surfaces. 8.Not contain solvent so no solvent odor and not need special health precaution during application . Waterproofing Uses ·Protective for Foundations, Basement walls, internal and external sides Lift pits Podiums, terraces, general external wet areas underground structures Waterproofing system over concrete blocks, brick, masonry, Waterproofing under tiles and pavers in external areas Sandwich sealing between existing and new . ·Anti-rust coating for machines and others steel elements. ·Used as adhesive for plastic sheets ·Used to produce elastic screeds, plastering cement Physical Properties @25 C° DISCRETIONS VALUE Appearance Brown/Black liquid Drying to black film Density (1.12 ±0.03) kg / L Solid content 52 ± 3 % Drying time 1-2 hrs. (with tacks) Viscosity 200 -300 gm. Time Between coats 3 4 hours
Novo Floor SL 2: : Is solvent free flooring epoxy system canting three compound uses for producing high quality epoxy self-leveling flooring with different thickness 2-3- 4 mm. ADVANTAGES 1.Easy and fast to apply. 2.Economically. 3.Good adhesion. 4.Good resistance for abrasion, chemicals and for petroleum products. 5.Anti-bacteria. 6.Can be used for producing anti-slip flooring. 7.Available with different colors. Field of Uses: Novo Floor SL 2: used for producing high quality self-leveling epoxy flooring for : 1.Factories of foods, medicine. 2.Water and electric stations. 3.Storage and logistic areas . 4.Bottling plants , ECT. Properties @ 25 c° Color :White , grey , and many colors Gloss :Glossy Solid content by (WT) : 100 % Mixing Ratio :1.86 A : 1 B : 4.29 C Specific gravity (mix ) :1. 68 ± 0.03 g/cm3 Pot life :35 min. Temp. of Application :( 15 35 ) Cº Full curing time: 7 days Rate of use :3 -4 kg /m2 -/ 2mm
Coatings.
Flexo water-based ink, decorative paintings, wood coatings, automotive coatings, pigment for ink, varnishes, Flexo, flexo graphic printing, water based ink, inks.
Industrial & protective coatings, marine coatings, polyurea elastomers, high performance flooring systems, decorative & special effect paints, wood coatings, fire proofing intumescent coatings, alkyd resins.
Paints, varnishes, printing inks.
Water flexographic based inks, solvent based ink, pigments, varnish, additives, and dispensing systems..Manufacturer.
