African Industrial And Automotive Suppliers and Manufacturers

Copper Wire Scrap grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5.. % (Max.) Total impurities...0.3.. % (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle Pure copper scrap 99.99% 1.Copper wire scrap 2.Copper wire,tube,plate,etc 3.High quality:99% Copper Scrap 99% High-quality cable scrap with almost no impurities Single Crystal Copper Wire 1.pure copper scrap 2.Good fatigue/abrasion/corrosion resistance 3.Be the bearing,switch,frame Millberry Cu 99.9%min Wire diameter: 0.30mm, 0.25mm, 0.20mm competitive price. Copper Scrap 99.9% Specification: ITEM TEST RESULT Copper: 99.9% Carbon : 0.03% Phosphorus : 0.01%max Coblet: 0.01%max Sulphur: 0.01%max Iron: 0.005%max Zinc: 0.003%

SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

The Compressor Scrap offered by us has good recycle value and are widely in demand. We are offering Compressor Scrap at very reasonable price for the convenience of the customers. Description Fridge/AC Compressor Scraps We sell Fridge/AC Compressor Scraps at a very competitive market price. Please let us know if you have a target price. Please kindly find some specification below. 1) Quantity: between 1,500 MT up to 3,600 MT per month. 2) Packing: As buyer requires (20ft container is up to 3000 pcs to 3450 pcs of compressors in the container. 25 MT or 26 MT) 3) Delivery: Immediately and prompt. Delivery Time: 7-21 days depending on delivery port.. Specifications Drained Copper Compressor â?? Fridges/AC (RAINS per ISRI Specifications). Our copper content on 99.97 % Monthly Supply Capacity: 500 - 1500 metric tons, Type: Fridges, AC. Packaging Detail: Wood Pallets, 20(40) FCL/ According to ISRI Specification in Containers Quantity: Between 200~500MT per month Minimum Order acceptable 1x20FCL (25MT or 26MT/20FCL, 3000 or 3450 Pieces/20FCL

Copper Wire Scrap, (Millberry Copper) 99% High Purity Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Pure copper scrap 99.99% 1.Copper wire scrap 2.Copper wire,tube,plate,etc 3.High quality:99% Copper Scrap 99% High-quality cable scrap with almost no impurities Single Crystal Copper Wire Application:copper scrap wire can be used on low speed wire cutting machines like Agie charmilles, Sodick,

Aluminum Extrusion 6063 Scrap Aluminum Extrusion 6063 Scrap. It is the most common alloy used for aluminum extrusions. Normally, Aluminium Extrusion 6063 Scrap shall consist of clean aluminum profile extrusions including window, shop fittings, irrigation tubes and door frames. However, it must be free of screws, iron components, plastics, rubber or other foreign materials. Chemical composition Silicon minimum 0.2%, maximum 0.6% by weight Iron no minimum, maximum 0.35% Copper no minimum, maximum 0.10% Manganese no minimum, maximum 0.10% Magnesium minimum 0.45%, maximum 0.95% Chromium no minimum, maximum 0.10% Zinc no minimum, maximum 0.10% Titanium no minimum, maximum 0.10% Other elements no more than 0.05% each, 0.15% total Aluminium ; Remainder

Model Number:Wire Scraps 99.99% Type:Copper Wire Copper Content:99.99% Brand Name:Wire Scraps 99.99% Millberry Copper wire scrap 99.99% /copper cathodes We could supply the copper scrap with high quality and competitive price. 1) Our copper scrap includes wires, tubes, and plates,cables etc. 2) The size is chips or other. 3) Copper content could meet customers need

Copper Wire (Mill berry) Scrap. From electrical cable wires Cooper: 99.98% Min. Carbon: 0.03% Cobalt:

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�¯�¿�½?�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�¯�¿�½?�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�¯�¿�½?�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�¯�¿�½?�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading

We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading

Product descriptions from the supplier Used Railway Steel the minimum order is 24 tonnes, and we always have a healthy amount of stock available for you to choose from. We can provide both heavy and light gauge railway line, which have multiple uses for our customers. The salvaged steel can be re-used many ways, including: Cattle grids Rural fencing Relays for light or heavy gauge rail Road barriers Retaining posts Smelting Trellis Posts/Stakes for Vineyards Crab Pot Weights We are operate in the supply of Metal Scrap of various kinds; HMS 1 & 2, AC/ Fridge Scrap, Engines Scrap, Battery Scrap, PVC Scrap, HDPE, LDPE and other Metal scrap from wide range extraction materials. Chemical Composition of the steel scrap is of international standard as follow: MN: 0.60 1.05; C: 0.54 0.82; Sl: 0.18 - 0.12; S: 0.04 Max; P: 0.035 max. MOQ contact: Used rails R50-r65 15,000mt x 12 months MOQ contact: HMS1/2 15,000mt x 12 months C 0.54 â?? 0.82 Si 0.18 â?? 0.40 Mn 0.60 â?? 1.05 S 0.04 max P 0.035 max As 0.01 max of Mass share Norms R-50 GOST-7173-75 and R-65 GOST-8165-75 R50 (51.67 KG/M) GOST 7173-75 R65 (64.72 KG/M) GOST 8165-75

Product descriptions from the supplier Used Railway Steel the minimum order is 24 tonnes, and we always have a healthy amount of stock available for you to choose from. We can provide both heavy and light gauge railway line, which have multiple uses for our customers. The salvaged steel can be re-used many ways, including: Cattle grids Rural fencing Relays for light or heavy gauge rail Road barriers Retaining posts Smelting Trellis Posts/Stakes for Vineyards Crab Pot Weights We are operate in the supply of Metal Scrap of various kinds; HMS 1 & 2, AC/ Fridge Scrap, Engines Scrap, Battery Scrap, PVC Scrap, HDPE, LDPE and other Metal scrap from wide range extraction materials. Chemical Composition of the steel scrap is of international standard as follow: MN: 0.60 1.05; C: 0.54 0.82; Sl: 0.18 - 0.12; S: 0.04 Max; P: 0.035 max. MOQ contact: Used rails R50-r65 15,000mt x 12 months MOQ contact: HMS1/2 15,000mt x 12 months C 0.54 â?? 0.82 Si 0.18 â?? 0.40 Mn 0.60 â?? 1.05 S 0.04 max P 0.035 max As 0.01 max of Mass share Norms R-50 GOST-7173-75 and R-65 GOST-8165-75 R50 (51.67 KG/M) GOST 7173-75 R65 (64.72 KG/M) GOST 8165-75

Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press

Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No.

Scraps Motherboards /Desktop Motherboards, Cards, Modems, Routers, Swich without aluminum cooler or other holder metal, wihtout plastic or metallic case

High Yielding Ceramic CPUs for Gold Scrap/Gold Recovery - Scrap so potentially missing pins/broken/bent. Please review pictures carefully for item condition

mixed lot of CPU computer processors is being sold as scrap for gold recovery. The lot includes processors from various brands such as AMD, Motorola, and Intel. These items are ideal for those who are interested in extracting gold from computer parts. Please note that the condition of these processors is not specified as they are being sold as scrap. However, they are believed to contain gold which can be extracted using appropriate methods. This lot is perfect for those who are interested in electronics recycling or gold recovery.