PET machines, food machine.
Authentic malaysian skewed satay, grilled and ready at eat satay with a variety of chicken, beef and mutton satay, delicious peanut sauces..
high quality pig feed pellet making machine pig feed pellet machine pig feed making machine 1).Driven by variable frequency motor, the feeder can be adjusted automatically within a certain scope according to the production; 2).The interlock device, outer machine discharging device and over-load protection device work together to ensure the safety and reliability; 3).Magnetic separation and removal mechanisms are configured to prevent the iron impurities from entering into the suppression of granulation chamber. 4).The cooking time and result are highly improved by the extended stainless steel feeding conditioner with the axial inlet steam. 5).The Circulating lubrication oil system is specially designed to ensure the bearings in good condition. 6).The ordinary conditioner, thermal insulation conditioner or double-shaft differential conditioner are options according to your requirements. 1.For pig, the pellet diameter is usually 3.5-6.5mm; The detailed process of Feed Mill Plant: Step 1.Raw materials receiving and cleaning process-(drum sieving precleaner, conical powder sieve and peermanent magnetic drum).Drum sieving precleaner is used to clean and sort out the big debris such as corn stalk, stones, rope head, branches, corn cobs and the small debris such as mud, sand and blighted grain. When the raw materials are powder, conical powder sieve is used to clean the debris in the powder. (And the machine can also be used after the mixing process and before the pellet making process to make sure the pellet mill can be smooth operation). Step 2. Crushing process hammer mills We have many kinds of hammer mills for your choice: water drop hammer mill, multifunctional hammer mill and 9fq hammer mill etc. This process is mainly used to crush to raw materials into powder. Step 3.Mixing process feed mixer The feed mixer we have are single shaft double screw mixer, double shaft paddle mixer, vertical mixer. The process is used to mixed the crushed materials with higher unifomity. Step 4. Pellet making process feed pellet mill We have five models of feed pellet mill for your choice. This process is to press the pellets out. Step 5.Pellet cooling process counterflow cooler The newly pressed pellets are very high in temperature. This process is to cool the pellets to 3-5 of the room temperature. Step 6.Pellet crumbling process feed crumbler(roller crusher) This process is mainly to crush the big pellets into small ones. It is mainly used for chicken feed pellet line. Step 7.Sifting process vibratory sizing sieve and plenary rotary sizing sieve This process is mainly to sort out the inappropriate pellets and powder and send the standard pellets to next process. Step 8. Packing process packaging machine This process is to pack the pellets into bags which is conveninet for storage and transportation.
Paslanmaz Perilla
Which main used to scald the sheep hair for de-hairing processing, main data as following 1)-Working principle: steam heating 2)-Scalding temperature 58-62 3)-Out size: 3000 1600 800mm 4)-Component and material: Hot galvanized steel or stainless steel main frame 80mm polyurethane insulation layer 2mm stainless steel plate shell Drain valve Temperature control system 304sainless steel steam heating pipe
Which main used to hang and transfer sheep carcass for complete processing, main data as following: 1)-Rate voltage/Frequency/Phase: 380V/50HZ/3P 2)-Power: 2.2Kw 3)-Hanging carcass distance:1200mm 4)-Max capacity: 400 Heads per hour 5)-Component and material: Hot galvanized steel or stainless steel closed 8# C-beam track with rail hanger Hot galvanized steel or stainless steel die forged chain with pusher dog High polymer wear-resistant walking wheel 304 Stainless steel hook Driving&pneumatic tension device Frequency control 60*4mm 304 stainless steel tube rail (tube-rail) 40*40*4mm 304 stainless steel double rail (Dual-orbit)
Which main used to assist staffs convenient to skinning sheep hind legs,main data as following: 1)-Out size: 1600X1000X800mm (LXWXH) 2)-Component and material:
Which main used to hang and transfer sheep carcass for complete bleeding by automatic, main data as following: 1)-Rated voltage phase frequency: 380v 3p 50hz 2)-Power: 2.2Kw 3)-Hanger distance:1200mm 4)-Max capacity: 400 Heads per hour 5)-Component and material: Hot galvanized steel or stainless steel closed 8# C-beam track Hot galvanized steel or stainless steel die forged chain with fingers High polymer wear-resistant walking wheel Climbing track and downhill track Driving&pneumatic tension device Rotate device Frequency conversion control 60 4mm 304 stainless steel tube rail (tube-rail) 40 40 4mm 304 stainless steel double rail (Dual-orbit)
Applicable products: Palm oil, soybean oil, sunflower oil, vinegar, wine and liquid cleaning chemicals Applicable containers: bottles, cans, jars Bottle volume: 100ml-10liters Capacity: 20-40 bottles per minute Options: 2, 4, 6, 8 heads Compressed air pressure: 0.6-0.8 Mpa / 6-8 bar
The so-called Fully Mixed Ration is a mixture of coarse material, fine material, minerals, microbes and other additives that can provide enough nutrition to satisfy dairy cows' need. feeding technology, on the basis of supporting technical measures and machinery with excellent performance, can ensure that cows eat every ration is a full-price diet with stable crude ratio and consistent nutrient concentration. This is a major change in the feeding pattern of dairy cows(cattle). Feed Mixer Machine Suitable for feedstuffing operations in farming and animal husbandry aquaculture areas, large and medium-sized farms, and standard community feeding farms. It can chop various fibrous feeds such as pasture, crop stalks, and silage, and mix it with concentrates to make it uniform operation. Dairy farm needed cattle feed mixer is a kind of machine which can mix coarse material, fine materials, minerals, vitamins and other additives thoroughly, and provide adequate nutrition to meet the needs of dairy cattle breeding. Main Features 1) Simple structure,easy in installation and maintain. 2) Adopting famous CHNT electrical components, automatic weighting system. 3) Two inlets, easy to check the mixing situation 4) Save the feed cost, Improve the quality of milk 5) Save labors
Introduction of Corn Seed Drying Machine: Cereal drying technology is as important as cereal storage. Mobile grain dryer is used to dry rice, wheat, corn, soybean and other grain crops with high moisture content. It is suitable for farms, grain stations and grain planting households.It is widely use for corn, paddy, wheat, sesame,bean,and other particle material,etc. The whole set of equipment adopts digital display, automatic temperature control, strong integrity, energy saving, power saving, simple operation and convenient movement. Advantage of Corn Seed Drying Machine: 1. Body compact, easy operation, especially design for small and middle farmer and company. 2. Adopt advance technology from With Short drying time, keep cereal feature with suitable temperature, reduce drying cost. 3. High drying efficiency, easy transport, save space, it can be moved to farm and drying everywhere. 4. Widely use for corn, paddy, wheat, sesame, etc. Features of Corn Seed Drying Machine: 1. Cereal without pollution, fresh air as input and make sure cereal clean without pollution. 2.Mobile,it with mobile wheel and device, can be towed by tractor. 3. Automatic control system for temperature and moisture. 4. Machine can be separate and install together, easy transport. 5. Display on time. Other Information: Our company is mainly engaged in the development and manufacturing of agricultural machinery, food machinery, feed machinery, wood machinery, coal machinery and other machinery.
Cattle Feed Mixer Factory Direct Sale Animal Feed Mixing Machine Product Description: cattle feed mixer is a kind of machine which can mix coarse material, fine materials, minerals, vitamins and other additives thoroughly, and provide adequate nutrition to meet the needs of dairy cattle breeding. Feed Mixer Machine Suitable for feed stuffing operations in farming and animal husbandry aquaculture areas, large and medium-sized farms, and standard community feeding farms. All kinds of crops straw, corn stalk, wheat stalk, cotton stalk, rice stalk, sorghum stalk, peanut stalk, peanut shell, crops straw, sugarcane straw, silage, hay, grass, herbage, sawdust, wood shaving, sweet potatoes etc. Why mix and crush feed mixer machine can fully mixed coarse materials, fine materials, minerals, microbes, and other additives to provide adequate nutrition to meet the animals. feeding technology can ensure that every ration of dairy has concentrate-roughage ratio and nutrient concentration, Can save the feed cost. Why Choose Us 1.We are true Manufacturer. 2.Best Quality & Best Service with Competitive price. Other Information Our company is mainly engaged in the development and manufacturing of agricultural machinery, food machinery, feed machinery, wood machinery, coal machinery and other machinery.
Machine used to spin fibre to coir
to clean the fibre before spinning and other processes
The machine used to make fibre pots in different size and shape with the help of short fibre that getting after the defibering process
The machine used to spin the fibre to coir.
The machine used to extract the long fibre ,Short fibre and coconut pith from the coconut husk. Now we are providing three variants of the Df machines with respect to its production capacity.
1. The fully automatic Hawthorn slicer is simple to operate. You only need to manually pour the Hawthorn into the gold silo of the equipment. 2. The operation panel drives intermittently to complete the conversion of three stations: feeding, punching and returning. 3. The equipment is made of stainless steel, which is solid and durable and not easy to damage. The slicing machine in Hawthorn processing plant is composed of motor, variable speed mechanism, tool rest, step-by-step material return, adjustable tool rest machinery, etc., so that the cut chip shape is uniform, the feeding distance can be controlled freely, and the bad situation of material extrusion will not be caused. Reasonable layout makes the machine easy to operate, light in appearance and light in weight. The work of this machine is mainly composed of two parts: feeding and cutting, machinery, etc.
(1) The full-automatic Ximei nuclear remover adopts a device with high degree of automation and automatic feeding and feeding of mold conveyor belt for conveying and core washing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and meat. It can work continuously and solve the difficulties of low efficiency, labor-consuming and time-consuming manual nuclear removal. (2) The structure of the full-automatic Ximei nuclear remover is composed of 304 stainless steel thick wall square tube and channel steel welding, which enhances the stability of the equipment during startup and operation. All parts are fastened and assembled with bolts, making the equipment more convenient and fast in operation and maintenance. (3) The raw material of the equipment is made of 304 stainless steel, which fully meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane, which is anti-wear, tensile and tear resistant, and has a longer service life. (4) The automatic Ximei de coring machine is simple and convenient to operate and does not need to be watched for a long time. One person can manage multiple machines at the same time. The transmission system adopts the design concept and standardized components. The core punching principle adopts the process of machine tool to punch the core, so that each equipment meets the design standard and has high precision, so that the effect of de coring rate is good, and the shape of fruit is completely unchanged.
1. The grape halving machine has simple and ingenious design, reliable and stable performance, and flexible cooperation of operation procedures. There is no need to do any treatment for grapes, and the disposable pulp is treated in half. The flesh morphology of the seeded fruit is standard, and there is no damage. 2. Before use, start the machine and check whether the cutter is aligned with the rotary table hole every time when the machine is running. If the operation is normal, pour the grapes into the feeding bin of the machine. 3. Start the power switch and cut the grapes in half. 4. When the machine is running, do not put any part of your body under the tool. 5. Low noise, stable performance, trouble free operation, and generalization of all components. Shopping instructions  this product is produced by Wanqing machinery manufacturer. This product is made of metal, with large volume and weight. It can only be delivered in the form of logistics transportation.
