Products ValueLam 4500HC-4 45" Hot/Cold 4 Roller Roll Laminator at Harisefendi provide a 100% money back guarantee and 100% safe, Because Harisefendi� the best of the best.We sell some of the best brands such as MIMAKI, ROLAND, MUTOH, SUMMA, SPECTRA, RICOH, SEIKO, U-MARQ, CANON, EPSON, HP, GRAPHTEC, XAAR, etc. And purchase Product Description Four roller laminators are designed for encapsulating documents, posters, etc. The newly designed ValueLam 4500 HC-4 is the ideal value-priced Laminating/Mounting Machine for large-format imaging output up to 44" wide. Throughput performance is improved over that of the original ValueLam 4500 HC by way of an additional set of pull rollers and forced air cooling fans for faster throughput. The ValueLam 4500 HC-4 laminator also features hot and cold lamination with dual heated rollers, release liner take up, 1/2" mounting capability and extra take up mandrel for automatic roll up of laminated prints. The ValueLam 4500 HC-4 runs all types of both cold and heat-set pressure sensitive laminates and adhesives and encapsulating with the true thermal laminates. Also featuring a "heat assist" mode (top roller heat only), the ValueLam 4500HC-4 laminator delivers the perfect heat level to increase initial adhesion and clarity of slow curing pressure sensitive films lessening the time to receive finished output suitable for display. The ValueLam 4500HC-4 is made in the USA. Usage Commercial Width 45" Min/Max Film Thickness 1.5 - 10 mil Core Size 3" Laminating Type Hot/Cold Heating Method Heated Rollers Heat Roller Diameter 3" Warm Up Time 25-30 Min Reverse Switch Yes Speed (Feet per Minute) 0-10 fpm Adjustable Temperature Yes - Independent for top and bottom Control Panel LED Readout Ready Light No Safety Auto Shutoff No Safety Shield 1 Feed Table Safety Switch No Key Lock No Mounting Capability 1/2" Electrical Requirements 20 amps, 120 VAC, 60Hz Machine Dimensions 56"L x 21"H x 30"D Weight 236 lbs Shipping Weight 474 lbs Net Weight 236 Country Of Origin USA
Products Xyron 6300 63 inch Cold Roll Laminator at Harisefendi provide a 100% money back guarantee and 100% safe, Because Harisefendi the best of the best.We sell some of the best brands such as MIMAKI, ROLAND, MUTOH, SUMMA, SPECTRA, RICOH, SEIKO, U-MARQ, CANON, EPSON, HP, GRAPHTEC, XAAR, etc. And purchas Product Description The Xyron 6300 is a 63" cold wide format roll laminator. This highly effective and efficient laminator allows you to both apply laminate, adhesive or both without the use of heat. The XM6300 delivers consistently even, edge-to-edge application of adhesive, and is environmentally safe. Simply feed your material into the machine, push a button and trim. No waiting, no smell and no mess. Accommodates documents up to 63" in width Even, edge to edge adhesive application Environmentally safe Fixed speed of 13fpm Emergency stop switch Foot pedal operation Color coded film loading Mounting capability of 3/16" Stand included Compatible with a variety of Xyron Laminating Film [Call for details] Machine dimensions: 79.8â?? x 21.7â?? x 54.7â?? Power Requirements: 110V One Year Mfr Warranty Usage Heavy Duty Width 63" Min/Max Film Thickness 2.7mil Core Size 3" (Uses Xyron Film Only) Laminating Type Cold Heating Method NA Reverse Switch No Ready Light No Safety Auto Shutoff No Feed Table Safety Switch No Mounting Capability Yes Mounting Thickness in mil 3/16" Electrical Requirements None Machine Dimensions 79.8â?? x 21.7â?? x 54.7â?? Weight 324 lbs Shipping Weight 421 lbs Net Weight 324 Free Shipping Yes Warranty 1 Year
Sponge iron, slag iron, coffee robusta, natural rubber, nickel ore.Trade
Chassis Brakes Front : Disc brake Brakes Rear : Disc brake Color : Yellow Dry Weight : 101.5 kg (224 lbs) Final Drive : D.I.D 520MXV, 114 links Fuel Tank Capacity : 6.2 L (1.6/1.4US/Imp gal) Ground Clearance : 350 mm (13.8 in) Overall Length : 2185 mm (86.0 in) Overall Width : 830 mm (32.7 in) Seat Height : 955 mm (37.6 in) Suspension Front : Telescopic, coil spring, oil damped Suspension Rear : Link type, coil spring, oil damped Tires Front : 80/100-21 Tires Rear : 110/90-19 Transmission : 5-speed constant mesh Wheelbase : 1480 mm (58.3 in). Engine Bore Stroke : 96mm x 62.1mm Compression Ratio : 12.2 : 1 Engine : 4-stroke, liquid-cooled, DOHC Fuel System : Fuel injection Ignition : Electronic ignition (CDI) Lubrication : Semi Dry sump Starter : Primary kick. DHL cargo.
Gibson Larry Carlton Signature ES-335 Features: * Color: Vintage Sunburst * Top: Maple / poplar / maple * Back: Maple / poplar / maple * Sides: Maple / poplar / maple * Neck: Mahogany * Fingerboard: Rosewood with pearloid block inlays * Number of frets: 22 * Pickups: Two '57 Classic Humbuckers * Controls: Two each tone and volume with three-way pickup selector switch * Machine heads: Schaller M6 * Hardware: Nickel plated * Case: Black smooth levant Packing by FedEx and DHL
Chassis Brakes Front : Disc brake Brakes Rear : Disc brake Color : Solid Black/Champion Yellow No. 2 Curb Weight : 112 kg (247 lbs) Final Drive : D.I.D 520MXV, 114 links Fuel Tank Capacity : 6.2 L (1.6/1.4US/Imp gal) Ground Clearance : 350 mm (13.8 in) Overall Length : 2185 mm (86.0 in) Overall Width : 830 mm (32.7 in) Seat Height : 955 mm (37.6 in) Suspension Front : Telescopic, coil spring, oil damped Suspension Rear : Link type, coil spring, oil damped Tires Front : 80/100-21 Tires Rear : 110/90-19 Transmission : 5-speed constant mesh Wheelbase : 1480 mm (58.3 in). Engine Bore Stroke : 96.0 mm (3.780 in) x 62.1 mm (2.445 in) Compression Ratio : 12.2 : 1 Engine : 4-stroke, liquid-cooled, DOHC Fuel System : Fuel injection Ignition : Electronic ignition (CDI) Lubrication : Semi Dry sump Starter : Primary kick. DHL Cargo.
Chassis Brakes Front : Disc brake Brakes Rear : Disc brake Color : Yellow Dry Weight : 69 kg (152 lbs) Final Drive : D.I.D 428DS, 122 links Fuel Tank Capacity : 5.0 L (1.3/1.1 US/Imp gal) Ground Clearance : 355 mm (14.0 in) Overall Length : 1895 mm (74.6 in) Overall Width : 735 mm (28.9 in) Seat Height : 875 mm (34.4 in) Suspension Front : Telescopic, pneumatic/coil spring, oil damped Suspension Rear : Link type, coil spring, oil damped Tires Front : 70/100-19 42M Tires Rear : 90/100-16.52M Transmission : 6-speed constant mesh Wheelbase : 1280 mm (50.4 in). Engine Bore Stroke : 48 x 46.8mm Compression Ratio : 9.5/10.9 : 1 Engine : 2-stroke, liquid-cooled Fuel System : KEIHIN PE28, single Ignition : Electronic ignition (CDI) Lubrication : Fuel/oil premixture of 30 : 1 Starter : Primary kick . DHL cargo.
Chassis Brakes Front : Disc brake Brakes Rear : Disc brake Color : Yellow Dry Weight : 96 kg (212 lbs) Final Drive : D.I.D 520DMA2, 114 links Fuel Tank Capacity : 8.0 L (2.1/1.8 US/Imp gal) Ground Clearance : 350 mm (13.8 in) Overall Length : 2170 mm (85.4 in) Overall Width : 830 mm (32.7 in) Seat Height : 950 mm (37.4 in) Suspension Front : Telescopic, pneumatic/coil spring, oil damped Suspension Rear : Link type Tires Front : 80/100-21 51M Tires Rear : 110/90-19 62M Transmission : 5-speed constant mesh Wheelbase : 1465 mm (57.7 in). Engine Bore Stroke : 66.4 x 72 mm Compression Ratio : 8.6/10.4 : 1 (Ex valve open/Ex valve close) Engine : 2-stroke, liquid-cooled Fuel System : KEIHIN PWK38S, single Ignition : Electronic ignition (CDI) Lubrication : Fuel/oil premixture of 30 : 1 Starter : Primary kick. DHL cargo.
Price : USD 915.00/Pcs Min Order : 1 - 5 Pcs Lead Time : 3 - 5 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Buy Mimaki JFX200 Printhead from Indoelectronic is 100% safe,Because purchase products at Indoelectronic provide a 100% money back guarantee. Location Indoelectronic : Jl.S.Parman No.21/272 Medan. Indoelectronic store Sell Brand model Printhead and Printers : Canon, Epson, Graptek, HP, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Toshiba, Vutex, and Xaar. Description Mimaki JFX200 Printhead To be used with: Mimaki JFX200-2513 Remarks: Original Product Specifications Dimensions: 89 x 25 x 69 mm (excluding cables) Head materials: SST, Nickel alloy and Epoxy Adhesive Nozzle plate surface: Coated SST Number of nozzles: 4 x 320 nozzles Nozzle spacing: 0.1693 mm Nozzle density: up to 600 npi Piezo yype: D33 Stacked PZT Temperature control: Integrated Heater and Thermistor Operator temperature range: Up to 80�° C Native drop volume: 7 pl Drop volume range: 7 - 35 pl Drop velocity: 7 m/s Jetting frequency: Up to 60 kHZ Life: 100 billion actuations per nozzle DP part number : PPHMI18963 This printhead GEN5 is suitable for Mimaki JFX200-2513 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M015028).
Price : USD 1,300.00/Pcs Min Order : 1 - 5 Pcs Lead Time : 3 - 5 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Buy Mimaki TS500-1800 Gen5 Printhead from Indoelectronic is 100% safe,Because purchase products at Indoelectronic provide a 100% money back guarantee. Location Indoelectronic : Jl.S.Parman No.21/272 Medan. To purchase online visit the Indoelectronic store Sell Brand model Printhead and Printers : Canon, Epson, Graptek, HP, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Toshiba, Vutex, and Xaar. Description Mimaki TS500-1800 Gen5 printhead Assy Type-D - M014140 This printhead is suitable for Mimaki TS500-1800 & TX500-1800 series printers. Printer Compatibility: Mimaki TS500-1800 / TX500-1800B / TX500-1800DS Part No.: M014140 Remarks: Original Specifications: Model PRH-MIM-006 Head materials SST, Nickel alloy, Epoxy Adhesive Number of nozzles Four 320 nozzles Nozzle spacing 0.1693 mm Nozzle density up to 600 npi Nozzle plate surface Coated SST Piezo type D33 Stacked PZT Native drop volume 7 pl Drop volume range 7 - 35 pl Drop velocity 7 m/s Jetting frequency Up to 60 kHZ Temperature control Integrated Heater and Thermistor Operator temperature range Up to 80 C Life 100 billion actuations per nozzle Dimensions 89 x 25 x 69 mm (not include cables)
Features: Genuine Zenoah G320 32cc engine Innovative Bind-N-Driveâ?¢ Spektrum SR6000T telemetry-ready receiver Improved bar style steering rack with adjustable Ackermann Improved center differential orientation Improved drive line angle Heavy-duty brakes Innovative clutch mount with gear mesh brace Tough throttle servo brace Extra-large 800cc capacity fuel tank Specifications: Type: 1/5th Scale 4wd Short Course Truck Scale: 1/5 Length: 38.0 In (965.2mm) Width: 20.75 in (527mm) Height: 12.25 in (311.1 mm) Ground Clearance: 2.0 in (50.8mm) Wheelbase: 24.0 in (609.6mm) Weight: 35.4 lbs (16.06 kg) Chassis: 5mm Plate, 6061-T6 Aluminum Suspension: 4-Wheel Independent Drivetrain: 4WD Tire Type: Firm, Square Pin Motor or Engine: 32cc Zenoah G320 Speed Control: SR6000T Telemetry Receiver Radio: DSMR Compatible (Not Included) Servos: S900S / S901T Batteries: 2S Receiver LiPo (Not Included) Gear Pitch: 1.5 MOD Wheel Size: 2.8in (71.1mm) wide Kit/RTR: BND Shock Type: Oil-Filled, Coil-Over Springs Body: 4 piece, Polycarbonate, Short Course with Decals Ball Bearings: Full Rubber Seal Ball Bearings in Car, Metal Shield for Clutch housing Fuel Tank Capacity: 800cc (27.1 oz) Includes: (1) Grey, Orange & White Losi 5IVE-T® 2.0 BND 4WD SCT (1) Spektrum® SR6000T 6-Channel DSMR Slim Receiver with Telemetry (1) Zenoahâ?¢ 32cc Gasoline Pull-Start Engine (1) S900S 1/5 Scale Metal Gear Steering Servo (1) S901T 1/5 Scale Metal Gear Throttle Servo (1) Wheel Wrench (1) Rod End/Shock End tool (1) Multi Wrench (1) Spark Plug Wrench (1) Bind Plug (1) Exhaust Gasket 2.0mm, 2.5mm, 3.0mm, 4.0mm Allen Wrenches Product Manual Needed To Complete: 2S Lipo Receiver Battery and Appropriate Charger DSMR Compatible Transmitter 87-92 Octane Gasoline 2-Cycle Oil Ratio Rite Measuring Cup
Mattress spring coil , m guard spring.
Buy JFX500-2131 GEN5 UV Printhead - M022626 is 100% safe,Because purchase products at Quantum Tronic provide a 100% money back guarantee. Price : USD 997 / Pcs Min Order : 1 - 5 Pcs Lead Time :3-7 Days Port : CIF Terms : Bank Transfer, Wise, Western union, Moneygram & WorldRemit Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock This printhead GEN5 (MH5420/5440) is suitable for JFX500-2131 & UJV500-160 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022626 replacing M013497 and M015068). Product Specifications Dimensions: 89 x 25 x 69 mm (excluding cables) Head materials: SST, Nickel alloy and Epoxy Adhesive Nozzle plate surface: Coated SST Number of nozzles: 4 x 320 nozzles Nozzle spacing: 0.1693 mm Nozzle density: up to 600 npi Piezo yype: D33 Stacked PZT Temperature control: Integrated Heater and Thermistor Operator temperature range: Up to 80�° C Native drop volume: 7 pl Drop volume range: 7 - 35 pl Drop velocity: 7 m/s Jetting frequency: Up to 60 kHZ Life: 100 billion actuations per nozzle Printer compatibility JFX500-2131 UJV500-160
