Copper plating electrode (Ti GR.2 MASH+DSA COATING) Specification Production quantity: 12 sheets 1. Coating part (both sides) 2. Current density ASD: 2.5~3.5ADS 3. Current efficiency: 80% 4. DC voltage: DC15V 5. Gap distance (distance between plating part and iridium electrode): 60~65mm 6. Electrode operation life: 8 years in use 7. Plating solution components (types) and solution temperature: (water, copper sulfate, chlorine, optical fiber) 23 C management
Specifications 1. Product name: Molybdenum electrodes 2.Material: Mo 3. high purity: 99.95% 4. Density: 10.2g/cc 5. Application: sapphire furnace, glass melting polished/ground moly electrode: Molybdenum electrode is electrodes made of material molybdenum, by applying its unique advantagestemperature resistance, continuous surface, stable edges good electrical conductivity, excellent corrosion-resistance -- to improve its entire quality and using age. Molybdenum electrode is silver gray metallic luster. It is isostatic pressed to forge to various types after sintering with medium frequency furnace and then turning, rolling, planning and milling. Meanwhile, the quality is unchanged, which can be seen from external and internal aspects, such as no lose side, no lose corner, and no crackle and divide layer. Thus, the surface of the molybdenum electrode is smooth and compact. Molybdenum electrode can be used for glass industry,andwork in the glass solution with the temperature of 1300�C. Molybdenum electrode is used as electro-heat equipment of the glass fiber kiln. It is an important part in rare earth industry. Its density is more than or equal to 10g/m3, and its purity can reach 99.5%. Molybdenum electrode: Dia.(mm) Tolerance Length(mm) Tolerance 16-20 +1.0 300-1500 +2 20-30 +1.5 250-1500 +2 30-45 +1.5 200-1500 +2 45-60 +2.0 250-1300 +3 60-100 +3.0 250-800 +3 It`s mainly used for metallurgy and machinery industry. Other sizes and special requests are available Mo has a unique property of which it's melting point can reach 2610 tungsten crucible is widely applied in high temperature vacuum furnace melting environment such as sapphire growing furnace, quartz glass melting furnace, and rare earth melting furnace. The working temperature of Mo sheet is above 1500. The melting process of the raw material for wool and fiber production is always by electrical heating with electrode, especially designed plate and Rod electrodes are generally used. We can provide stable quality Mo material with plate and Rod electrodes based on uniform density, purity and fine metal grain strength property. For glass melting application, high-purity, high-density, with other features of exact measurement and smooth surface has decisive influence on the success of quality control of glass melting and service life during meltng process. Composition: Grade The impurity content is not more than % Fe Ni Al Si Mg C N O Mo-1 0.01 0.005 0.002 0.01 0.005 0.01 0.003 0.008 Mo-2 0.01 0.005 0.005 0.01 0.005 0.01 0.003 0.02
1. 17.2mm diameter, 3 meters long or other sizes on request. 2. Minimum 250-micron copper coating. 3. 25kG bag Backfill compound. 4. Available with FRP pit cover. 5. Made in India.
Product Description "We are engaging in producing high quality Graphite electrode from D200mm-D700mm (NP, HP, SHP, UHP) used for global metallurgical industry. After years of experience in research and development, we are equipped ourselves with the advanced production, inspection and test equipments, including calcinations, press, baking, pitch impregnation, graphitization, machining, an advanced and complete production process. Product origin : China Key Specifications/Special Features : 1. Lower electric resistivity, good electric and heat conductivity; 2. High mechanical strength under high temperature; 3. High resistance to thermal shock and mechanical vibration; 4. Lower ash content; 5. According to the customer's feedback information, our electrodes used in EAF/LF with the pretty lower consumption per ton steel. Minimum Order Size and Packaigng details : Packing: Wooden Pallet , Minimum Order Quantity20 feet container
Sinometal Carbon is one of the leading manufacturer and exporter of Graphite Electrode in China, located in Shanxi province, with total production of 100,000TPA. We are engaging in producing high quality Graphite electrode from D200mm-D700mm (NP, HP, SHP, UHP) used for global metallurgical industry. After years of experience in research and development, we are equipped ourselves with the advanced production, inspection and test equipments, including calcinations, press, baking, pitch impregnation, graphitization, machining, an advanced and complete production process. Our graphite electrodes has the following feature: 1. Lower electric resistivity, good electric and heat conductivity; 2. High mechanical strength under high temperature; 3. High resistance to thermal shock and mechanical vibration; 4. Lower ash content; 5. According to the customer's feedback information, our electrodes used in EAF/LF with the pretty lower consumption per ton steel.
YCC is one of the leading manufacturer in China, annual productivity of graphite electrode is 65000 tons. YCC produces UHP, HP and RP graphite electrodes with the diameter 300 mm to 700mm. Are approved by users from more than 40 countries like Australia, Serbia, Italy, France, UK, Czech Republic, Slovenia, Poland, Romania, Turkey, Belarus, Russia, Brazil, Argentina, Ecuador etc.
YCC is one of the leading manufacturer in China, annual productivity of graphite electrode is 65000 tons. YCC produces UHP, HP and RP graphite electrodes with the diameter 300 mm to 700mm. Are approved by users from more than 40 countries like Australia, Serbia, Italy, France, UK, Czech Republic, Slovenia, Poland, Romania, Turkey, Belarus, Russia, Brazil, Argentina, Ecuador etc.
YCC is one of the leading manufacturer in China, annual productivity of graphite electrode is 65000 tons. â?¢ YCC produces UHP, HP and RP graphite electrodes with the diameter 300 mm to 700mm. Are approved by users from more than 40 countries like Australia, Serbia, Italy, France, UK, Czech Republic, Slovenia, Poland, Romania, Turkey, Belarus, Russia, Brazil, Argentina, Ecuador etc.
Bulk density not below (g/) : 1.74 Electrical Resistivity ( m) : 4.2-5.5 Flexible/Bending Strength not over (Mpa) :14-16 Young/Elastic Modules not over (Gpa) : 7-14 (C.T.E) not over (10-6 /) : 1.0 Ash content not over (%) : 0.2
The advantages of the product: 1. Anti-oxidation treatment for longevity. 2. High-purity,high-density,strong chemical stability. 3. High machining accuracy,good surface finishing. 4. High mechanical strength,low electrical resistance. 5. Resistant to cracking & spalling. 6. High resistance to oxidation and thermal shock.
Rate - RP/HD/HP/UHP Dia- 100mm-800mm Length - 1500mm-2800mm
High quality needle cokes are used to make UHP graphite electrodes through special process. The products are mainly used in steel-making electric arc furnaces and ladle furnaces with low consumption, good electric conductivity, anti-oxidation and high flexible strength. Their physical and chemical data as well as products quality have reached domestic and international leading level. This company has already had a 30,000-ton productive capacity.
High quality needle cokes are used to make UHP graphite electrodes through special process. The products are mainly used in steel-making electric arc furnaces and ladle furnaces with low consumption, good electric conductivity, anti-oxidation and high flexible strength. Their physical and chemical data as well as products quality have reached domestic and international leading level. This company has already had a 30,000-ton productive capacity.
High quality needle cokes are used to make UHP graphite electrodes through special process. The products are mainly used in steel-making electric arc furnaces and ladle furnaces with low consumption, good electric conductivity, anti-oxidation and high flexible strength. Their physical and chemical data as well as products quality have reached domestic and international leading level. This company has already had a 30,000-ton productive capacity.
High quality needle cokes are used to make UHP graphite electrodes through special process. The products are mainly used in steel-making electric arc furnaces and ladle furnaces with low consumption, good electric conductivity, anti-oxidation and high flexible strength. Their physical and chemical data as well as products quality have reached domestic and international leading level. This company has already had a 30,000-ton productive capacity.
PARENTNashik offers spot welding electrodes tips in different shape, style with threaded or taper as per international standards made in Chromium copper zirconium -C-18150 - group-A for spot welding gun, portable rocker arm welders & robotics gun. PARENTNashik  Electrodes types Cap tip,� straight, single & double bend electrodes, threaded â?? screwed, composite, crank, swivel, nut & stud, projection, tungsten & tungsten copper faced, BS807 electrode tips, flat, centre, offset, angle offset, cranked, spade, jobbing, reducing, ISO electrode tips, PSA style electrodes& many more. Why PARENTNashik #Quick Delivery #Best Price #Excellent Quality. For more details send your requirements for free quote and samples.
Graphitized electrode is made of high quality calcined petroleum coke,imported needle coke and modified coal asphalt,the grade are RP,HD(impregnation),HP and UHP graphite electrodes,the specification is 75-700mm. Graphite electrode produced by our company has the advantages of low resistivity,high electrical conductivity and thermal conductivity,good oxidation resistance,good thermal shock resistance,high mechanical strength,easy to machine,etc. Graphite electrode is widely used to smelt the steel,alloy steel and other metal or nonmetal material in electric arc furnace.
UHP Graphite Electrode, Graphite Electrode Block, Graphite Carbon Electrode Graphite Electrode 1. Quick Details Place of Origin: Hebei, China (Mainland) 3. SPECIFICATION LIST UHP Size and Tolerance Diameter (mm) Length (mm) Nominal diameter Actual diameter Nominal length Tolerance Short feet length mm inch max min mm mm max min 200 8 209 203   1800/2000/2200/23002400/2700    ±100    -100     -275  250 10 258 252 300 12 307 302 350 14 357 352 400 16 409 403 450 18 460 454 500 20 511 505 550 22 556 553 600 24 613 607 700 28 714 708  Physical and Chemical Index of UHP  Items  unit Diameter: 200-700mm Standard Test data Electrode Nipple Electrode Nipple Electrical resistance �¼�©m 5.5-6.0 5.0 5.0-5.8 4.5 Flexure strength Mpa 10.5 16 14-16 18-20 Modulus of elasticity GPa 14 18 12 14 Ash content % 0.2 0.2 0.2 0.2 Apparent density g/cm3 1.64-16.5 1.70-1.72 1.72-1.75 1.78 Factor of expansion(100-600) x10-6/ 1.5 1.4 1.3 1.2 4. Product details Graphite electrode raw material use low sulphur and low ash CPC, coke plant pitch. HP grade graphite electrode add 30% Japan needle coke, UHP grade graphite electrode use 100% needle coke. Widely used in LF, EAF for steel making industry, Non-ferrous industry, silicon and phosphorus industry. Graphite electrode is used in the electric smelting industry, which has properties of superior electric conductivity, thermal conductivity, high mechanical strength, oxidation and corrosion resistance in high temperature. Our graphite electrodes are with low electric resistance, high density, high anti-oxidation capacity, precise machining accuracy, especially with low sulphur and low ash will not give steel second time to impurity. Graphite has good chemical stability. The specially processed graphite has the characteristics of corrosion resistance, good thermal conductivity and low permeability. 5. Production flow chart 6. Application Graphite electrode is a conductive material for smelting iron and steel, brown corundum, metal silicon and so on in electrical arc furnace. Mochang supplies UHP & HP & RP Graphite Electrode, Amorphous Graphite Powder, Graphite Block, Graphite Crucible. Our Extruded Graphite has high quality and competitive prices. If you have any question on Graphite Electrode Block, Graphite Powder, Graphite Block, Graphite Crucible, We will give the professional answers to your questions. For more product information, please click here.
RP Graphite electrode,HG Graphite electrode,UHP graphite electrode Resistivity: 4.8-6 3.5-5 Bending Strength:10-14 Mpa 20-24 MPa Young's Modulus: Electrode 9.0-13 Nipple 15-18 Bulk Density: Electrode 1.68-1.74 Nipple: 1.77-1.82 CTE: Electrode 1.1-1.4 Nipple 0.9-1.2
Artificial graphite electrode is made of high-quality low ash materials, such as petroleum coke, needle coke and coal pitch.after calcining,burdening,kneading,forming,baking and pressure impregnation, graphitization and then precision machined with professional CNC machining.such of the products own characteristics with low resistivity, good electrical conductivity ,low ash, compact structure,good anti oxidation and high mechanical strength, so it is the best conductive material for electric arc furnace and smelting furnace.
