Tie Rod End for forklift
Ld single girder overhead crane is widely used in various places such as factory, warehouse, stuff yard to lift goods, forbidden to use in flammable, explosive and corrosive environment. The girder and end beam of overhead crane are connected together by high strength bolts to ensure the structure strength and precision of the whole machine. The end beams of this bridge traveling crane are equipped with flat wheel or double rim wheels, anti-friction bearings, buffer blocks and derailment preventing end plate. The maintenance walkway of ld single girder overhead crane is located on one side of the main girder, consisting of flower pattern plate, 1050 meters handrail. Lifting capacity: 1~20 t Span length: 7.5~28.5 m Lifting height: 6~18 m Lifting speed: single/double/variable speed Working class: a3, a4 Ambient temperature: -20~40 degree
Features of construction machinery wheel loader 1).Using direct injection diesel engine as power, with easy startup and low oil consumption 2).Using special drive axle, with strong ability to overcome obstacle 3).Using the central articulated frame and loadsensing hydraulic steering gear, with small turning radius and flexible turning, which applies to the operation in narrow space 4).This machine uses hydraulic operation, with simple structure, convenient operation, good performance and reliable quality 5).Widely applying to the construction of agricultural engineering and small and medium building such as road, coal mine, brickyard, urban construction, kiln factory, stone material factory, prefabricated cement parts factory, etc. Dimension (mm): 4700*1600*2700
Jhq series polyurethane buffer The jhq series polyurethane buffer can quickly transform the impact kinetic energy into the elastic potential, featuring in reliable hardness and impact elasticity, good re sume property, high and low temperature resistant and insulation, etc.Its simple structure, small volume, light weight and convenient mounting and maintenance, which are the ideal devices for safe operations.Please check photos to know the types and visit our website to know more about buffer products.If you interest, visit www doc rkprocessing doc com. Jhq-a polyurethane buffer Jhq-a-1 to jhq-a-30, diameter65 mm to 500mm, height 80mm to 750mm Buffer capacity 0.295kn.M to 70.109kn.M, buffer stroke 60mm to 532mm, Buffer force 28kn to 912kn, total weight 0.280kg to 70.08kg. Jhq series polyurethane buffer The jhq series polyurethane buffer can quickly transform the impact kinetic energy into the elastic potential, featuring in reliable hardness and impact elasticity, good re sume property, high and low temperature resistant and insulation, etc.Its simple structure, small volume, light weight and convenient mounting and maintenance, which are the ideal devices for safe operations.Please check photos to know the types and visit our website to know more about buffer products.If you interest, visit www doc rkprocessing doc com. Jhq-a polyurethane buffer Jhq-a-1 to jhq-a-30, diameter65 mm to 500mm, height 80mm to 750mm Buffer capacity 0.295kn.M to 70.109kn.M, buffer stroke 60mm to 532mm, Buffer force 28kn to 912kn, total weight 0.280kg to 70.08kg.
We specialize in construction machinery as well as spare parts export in China. We mainly deal with wheel loader, motor grader, road roller spare parts for XCMG machine and Shantui bulldozer spare parts. Year 2009, we have set up 300m2 warehouse to offer spare parts for our customers. There is no problem to offer crane spare parts, wheel loader spare parts and motor grader spare parts. The parts are original spare parts matched with XCMG machinery. Year 2011, Shantui spare parts ware house were also set up, which covered 100 m2, specializing in Shantui bulldozer spare parts. Because of our persistence hard work, we have our products sold to nearly 20 countries and regions including Brazil, Iran, South Africa, America, Ethiopia, Russia, Kazakhstan and so on. And these customers have a very good feed back to our products. Whats more, our parts have covered 50% of Argentina market and 30% of Iran market for spare parts importation. Year 2011, we became the first level distributor of JINAN HYDRAULIC PUMP CO., LTD. We offer gear pumps for all brands wheel loaders made in China including XCMG, LIUGONG, LONKING, SEM, SDLG, CG etc. These pumps are originally used to assemble above mentioned wheel loaders. We could enjoy a very competitive purchase price for pumps. Wood case.
We offer parts for all brands of lift trucks: Hyster, Yale, CAT, Clark, Toyota, Nissan, Doosan, and many more.
The product has passed the CE certification and is mainly applied in petroleum, chemical engineering, pharmacy, light textile, military engineering, painting, coal, port, railroad, warehouse, bridge back, etc. for load and unload, pile and move. 1)It adopts double mast and chain driving technology. 2)The controlling system is programmable based on the imported advanced foreign technology. 3)Moving type: electric driving and climbing to a certain gradient. 4)The rising height and load can be changed as required by the customers. 5)There are complete safety equipments and their technical performance has reached the advanced level as the international product.
Nearly all the kind of the springs of the forklift.
Disassembling and assembling is easy Can fit into smaller spaces when disassembled Equipped with wheels on the mast also allow it to be user as a trolley; Light alumium mast, easy for handling. No any hydraulic problem, because it's operated by winch. The best brake function with special design is obvious. Technical data : 1kg=2.2lb 1inch=25.4mm Item/type: Wfh-181, Sw-181, Wfh-227, Sw-227 Capacity q Kg: 181, 181, 227, 227 Load center Mm: 305, 305, 305, 305 Max.Fork height Mm: 2500, 1700, 1250, 1250 Min.Fork height Mm: 90, 50, 90, 50 Fork length Mm: 570, 570, 570, 750 Fork width Mm: 630, 1100, 630, 1100 Net weight Kg: 60, 66, 51. Fork length570. Fork width1100. Net weight66kg.
Smooth travel and lift combine excellent controls to reduces product damages and increases productivity. Lift limit switch operates at maximum lift height to shut off pump motor. A heavy-duty 24-volt electrical system provides good travel and lift speeds. High quality hydraulic pump assures very little noise, maximum efficiency and durability. Drive units is equipped with an electromagnetic brake that is spring applied and electrically released. The brake is activated by the control handle position. The handle is ergonomically designed with a raise, lower and horn button. Speed automatically reduces when driving with the forks at a height of 12" or higher. Small turn radius makes it suitable for narrow passage ways. The CURTIS electronic controller helps provide plenty of low end torgue while in creasing the motor and battery life. Foot pedal reduces fatigue. Built-in charger. Technical data Residual Capacity at different lifting height. 1KG=2.2LB 1INCH=25.4MM Up to h3 mm ACTUAL CAPACITY (Q) kg 2500, 1500, 1000 2900, 1000, 700 3400, 800, 500 Load center distance (C)mm 600, 700 With CURTIS electric control from Germany Equipped with METRLROTA driving wheel and HPI pump unit from Europe. Heavy duty design with top quality mast construction of HOSCH steel from Germany. Identification 1.2 Manufacturer's type designation FL1529 FL1534 1.3 Drive:electric(battery or mains), diesel, petrol, fuel gas, manual electric 1.4 Type of operation:hand,pedestrian,stand ing,seated, order-picker Pedestrian 1.5 Load Capacity /rated load Q (t) 1.5 1.6 Load center distance C mm 600 1.8 Load distance, center of drive axle to fork X mm 677 1.9 Wheelbase y mm 1183 1168 Weights 2.1 service Weight Kg 1020 1120 2.2 Axle loading, laden front/rear Kg 1195/1325 1245/1375 2.3 Axle loadings, unladen front/rear Kg 755/265 826/295 Wheels Chassis 3.1 Tyres: solid rubber, superelastic, pneumatic, polyurethane) polyurethane 3.2 Tyre size, front 250x78 3.3 Tyre size, rear 80x70 1) 3.4 Additional wheels(dimensions) 150x54 3.5 Wheels, number front/rear(x=driven wheels) 1x+2/4 3.6 Track width,front b10(mm) 685 3.7 Track width,rear b11(mm) 390/515 Basic Dimensions 4.2 Lowered mast height h1(mm) 2005 2235 4.3 Free lift h2(mm) 144 - 4.4 Lift height h3(mm) 2814 3314 4.5 Extended mast height h4(mm) 3430 3905 4.9 Height of tiller in drive position min./max. h14(mm) 985/1365 4.15 Lowered height h13(mm) 86 4.19 Overall length l1(mm) 1940 1925 4.20 Length to face of forks l2(mm) 790 775 4.21 Overall width b1(mm) 805 4.22 Fork dimensions s/e/l(mm) 60/180/1150 4.25 Width over forks b5(mm) 570/695 4.32 Ground clearance, center of wheelbase m2(mm) 50 4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147 4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123 4.35 Turning radius Wa(mm) 1480 1465 Performance Data 5.1 Travel Speed, laden/unladen km/h 5.1/5.4 5.2 Lift speed, laden/unladen mm/s 105/170 5.3 Lowering speed, laden/unladen mm/s 100/95 5.8 Max.gradient performance, laden/unladen % 6/12 5.10 Service brake Electromagnetic E-Motor 6.1 Drive motor rating s2 60min kw 1.2 6.2 Lift motor rating at s3 15% kw 3.0 6.3 Battery acc. To DIN, no 3PZS 6.4 Battery voltage, norminal capacity V/Ah 24/210 Others 8.1 Type of drive control MOSFET Control 8.4 Sound level at driver's ear acc.to EN12053 dB(A) 67 1)Single wheel 80x93 .2 Lowered mast height h1(mm) 2005 2235 4.3 Free lift h2(mm) 144 - 4.4 Lift height h3(mm) 2814 3314 4.5 Extended mast height h4(mm) 3430 3905 4.9 Height of tiller in drive position min./max. h14(mm) 985/1365 4.15 Lowered height h13(mm) 86 4.19 Overall length l1(mm) 1940 1925 4.20 Length to face of forks l2(mm) 790 775 4.21 Overall width b1(mm) 805 4.22 Fork dimensions s/e/l(mm) 60/180/1150 4.25 Width over forks b5(mm) 570/695 4.32 Ground clearance, center of wheelbase m2(mm) 50 4.33 Aisle width for pallets 1000x1200 crossways Ast(mm) 2162 2147 4.34 Aisle width for pallets 800x1200 lengthways Ast(mm) 2136 2123 4.35 Turning radius Wa(mm) 1480 1465.
Technical data : 1KG=2.2LB 1INCH=25.4MM Model No. SEN1520, SEN1525, SEN1530, SEN1535, SEN2020 Rated Capacity kg 1500, 2000 Load Center mm 400 Max. Fork Height 2000, 2500, 3000, 3500, 2000 Max. Machine Height 2560, 3060, 3560, 4060, 2560, Fork Length 1000 Fork Width 300-850 Min. Turning Radius 1350, 1450, 1350 Wheel Base 1185 Front-Wheel Distance 316 Lifting Motor v/kw 12/1.5-1.6 Aneroid Battery v/Ah 12/120-150 Charger v/A 12/15 Overall Length mm 1660 Overall Width 865, 930 Overall Height 1580, 1830, 2080, 2330, 1580 Overall Net Weight kg 448, 470, 492, 515.
Chassis parts forklift parts.
Electric system forklift parts.
Forklift parts.
Brake system forklift parts
Cooling system forklift parts.
3304DP CYLINDER HEAD COMPLETE 3304DP CYLINDER HEAD COMPLETE 3304DP CYLINDER HEAD COMPLETE 3304DI CYLINDER HEAD COMPLETE 3304DI CYLINDER HEAD COMPLETE 3306DI CYLINDER HEAD COMPLETE 3306DI CYLINDER HEAD COMPLETE 3306DP CYLINDER HEAD COMPLETE 3306DI CYLINDER HEAD COMPLETE 3406 A CYLINDER HEAD COMPLETE 3406 B CYLINDER HEAD COMPLETE 3406 A-DI CYLINDER HEAD COMPLETE 3408 A-DI CYLINDER HEAD COMPLETE 333 C CYLINDER HEAD COMPLETE 330 C CYLINDER HEAD COMPLETE. PALLET 120X80X80.
3306di Engine block only-6 cyl in line 6n 7986 3412 b Engine block only- v12- 2w 4857. Pallets.
Forklift.
The main forklift we serviced are the chinese brand forklifts, including heli, hc, tailift, baoli, dalian, jac and so on. We also do the oem forklift spare parts made by customerf+s samples. Export standard packing
