Specifications
1) tubing head api 6a spec
2) pressure:2000-15000psi
3) temperature: p~u
4) material: aa-ff
5) medium: oil/gas/fluid
Api 6a tubing head
Brief introduction:
Tubing heads have straight bore bowl with 45 degree landing shoulders design which avoids damage to sealing areas by drilling tools and prevents wedging of tubing hangers, bowl protectors and test plugs.
The upper flange is supplied with lockdown screws for packoff re-nergization and tubing hanger retention. The lower flange includes a grease fitting and orifice for testing of secondary seal.
We could supply all models of casing head forging, and we carry out api 6a standard.We could finish the final machining according to the customers' requirements
1, api 16a ram bop
2, bore dia.: 7 1/16"-26 3/4"
3. Pressure: 14mpa to 105mpa
4. Forged and casting
Ram blowout preventer
Hydraulically/manual operated locking mechanism.
Secondary seal.
Flat and side door structure or hydraulic control type flat door structure.
The side door and shell are connected by triple hinges.
Open and close the valve in sequence by using pressure bar(c type ram bop)
The guide frame is set at the end of the side door, when the side door is opened, the ram can be pulled out along the guide rail and the ram can be replaced(d type ram bop)
Pistons indicator.
Concealed oil way.
The cavity of ram is ellipse.
Hydraulic pressure: 1200~1500psi(8.4~10.5mpa)
Hydraulic connection: npt1
Working temperature: -29
Media: oil gas & drilling fluid containing h2s
Ram size and type : series size pipe ram, reducing ram and cutter ram.
Specifications
1, api 16a ram bop
2, bore dia.: 7 1/16"-26 3/4"
3. Pressure: 14mpa to 105mpa
4. Forged and casting
Ram blowout preventer
Hydraulically/manual operated locking mechanism.
Secondary seal.
Flat and side door structure or hydraulic control type flat door structure.
The side door and shell are connected by triple hinges.
Open and close the valve in sequence by using pressure bar(c type ram bop)
The guide frame is set at the end of the side door, when the side door is opened, the ram can be pulled out along the guide rail and the ram can be replaced(d type ram bop)
Pistons indicator.
Concealed oil way.
The cavity of ram is ellipse.
Hydraulic pressure: 1200~1500psi(8.4~10.5mpa)
Hydraulic connection: npt1
Working temperature: -29
Media: oil gas & drilling fluid containing h2s
Ram size and type : series size pipe ram, reducing ram and cutter ram.
China supplier model ddz center latch elevators are suitable for handling 18 degree taper shoulder drill pipe, drilling tools and etc. The elevators are designed and manufactured according to api spec 8c-specification for drilling and production hoisting equipment.
Model: dd, ddz, cd, cdz,
Pipe size range: 2 3/8"-5 1/2"
Load capacity: 100tons-350tons
Ddz center latch elevator
Product description
China supplier model ddz center latch elevators are suitable for handling 18â°taper shoulder drill pipe, drilling tools and etc. The elevators are designed and manufactured according to api spec 8c-specification for drilling and production hoisting equipment.
1. Standard: API 16A
2. Competitive price with high quality.
3. Prompt delivery
4. Size range: 7 1/16"-21 1/4"
5. Pressure range: 2000-15000psi
800kgs
Specifications
1)bop remote control system
2)control bop&valve
3)automatic remote control system
4)double protective device
5) api spec 16d
Bop remote control system/accumulator unit
Bop remote control system is special equipment, which is used to control bop, hydraulic chock, kill system and diverter equipment, and indispensable equipment for blowout preventer during drilling or workover in petroleum and natural gas industry.
The function of the remote control system for surface mounted bop stacks is preparing and prestoring enough hydraulic oil and controlling its flow direction, in order to open or close bop quickly. As the hydraulic oil used, the pressure drops down, when the pressure lowers to a certain value, the accumulator unit will renew the hydraulic oil automatically, to keep the pressure in a certain high value.
1000kg
The casing head is a kind of part of connecting casings and wellheads. It is used to support the weight of technical casing and intermediate casing and seal the annular space between the casings, which provides a transition joint for the installation of the tubing head, Christmas tree and other wellheads. The two-side-outlet design allows the casing head to supply cement, monitor and control well's sinking, and inject balance liquids etc.
1000kg
Specifications
Dd drill pipe elevators:
1. Api 8c spec
2. Prompt delivery
3. Handling 90 shoulder drill pipe, casing, tubing and drill collar
Dd center latch elevators
The dd type elevators are hoisting tools for handling 90â°shoulder drill pipe, casing, tubing and drill collar in oil and gas field.The elevators are designed and manufactured according to api spec 8c-specification for drilling and production hoisting equipment.
Technical specification:
Main technical parameters:
Model Size (in) Rated capacity
(short tons)
Drill pipe Casing Tubing
Dd-100 2.3/8-5.1/2 4.1/2-5.1/2 2.3/8-4.1/2 150
Dd-250 2.3/8-5.1/2 4.1/2-5.1/2 2.3/8-4.1/2 250
Dd-350 2.3/8-5.1/2 4.1/2-5.1/2 2.3/8-4.1/2 350
Specifications
1, api 16a ram bop
2, bore dia.: 7 1/16"-26 3/4"
3. Pressure: 14mpa to 105mpa
4. Forged and casting
Ram blowout preventer
Hydraulically/manual operated locking mechanism.
Secondary seal.
Flat and side door structure or hydraulic control type flat door structure.
The side door and shell are connected by triple hinges.
Open and close the valve in sequence by using pressure bar(c type ram bop)
The guide frame is set at the end of the side door, when the side door is opened, the ram can be pulled out along the guide rail and the ram can be replaced(d type ram bop)
Pistons indicator.
Concealed oil way.
The cavity of ram is ellipse.
Hydraulic pressure: 1200~1500psi(8.4~10.5mpa)
Hydraulic connection: npt1
Working temperature: -29
Media: oil gas & drilling fluid containing h2s
Ram size and type : series size pipe ram, reducing ram and cutter ram.
900kg
Specifications
1)bop remote control system
2)control bop&valve
3)automatic remote control system
4)double protective device
5) api spec 16d
Bop koomey
Bop koomey is special equipment, which is used to control bop, hydraulic chock, kill system and diverter equipment, and indispensable equipment for blowout preventer during drilling or workover in petroleum and natural gas industry.
The function of the remote control system for surface mounted bop stacks is preparing and prestoring enough hydraulic oil and controlling its flow direction, in order to open or close bop quickly. As the hydraulic oil used, the pressure drops down, when the pressure lowers to a certain value, the accumulator unit will renew the hydraulic oil automatically, to keep the pressure in a certain high value.
1000kg
The casing head is a kind of part of connecting casings and wellheads. It is used to support the weight of technical casing and intermediate casing and seal the annular space between the casings, which provides a transition joint for the installation of the tubing head, christmas tree and other wellheads. The two-side-outlet design allows the casing head to supply cement, monitor and control well's sinking, and inject balance liquids etc.
Company information:
Lake petro company is a professional supplier of various oilfield equipment, including oil drilling and service equipment, oil production equipment, octg, wellhead & downhole tools and spare parts with api certification. Following the principle of "quality first, science and technology innovated, people oriented", every lake petro person is sparing no effort to provide the customers with best products and services. Through efforts of lake petro staff, our products have already been exported to usa, south america, africa, middle east, russia and some other countries (regions). With super quality, reasonable price and professional service, lake petro company has become vip (assigned) supplier and built strategic partnership with some coutries' national petroleum companies.
Faq:
1.How is the product quality can be asssured ?
As a professional supplier for oil and gas , lake petro provided the products as api and bv certified , at the same time sgs and other inspection as cusotmer request can be arranged as for need.
2.What is your delivery time after the po:
We provide in customer need, for ungrent inquiry, we have the professional team to work for you, your order should be arrange in first place to meet your need.
3.Can we have big discount , when large order:
Yes. We can give you the discount on your order staff, with us, you can save your money, on the basis of the quality products.
1000kg
A. Slick Drill Collar
Note: Drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. The Drill collar are manufactured strictly from API Spec7-1 and SY5411 standard.
B. Spiral Drill Collar
Note: Spiral drill collar is used to reduce contact area with hole so as to avoid efficiently bit sticking from diffirential pressure. The drill collars are manufactired strictly according to API Spec7-1 and Standard SY5144
C. Spiral Drill Collar With Elevator Groove And Slip Groove
Note: Elevator groove and slip groove made on box thread face of slick drill collar or spiral drill collar can be used as lifting sub and safety slip when trip out. The technical parameters for elevator groove and slip groove is as per API SPEC7-1. Hardbanding is optional at customersâ?? requests.
D. Non-magnetic Drill Collar
The as cold rooled finish on both ID and OD surface with unique technical process strengthen the structure and ensures the tools with optimal resistance to stress,corrosion,cracking and the mechanical performance is greatly enganced.
A. Slick Drill Collar
Note: Drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. The Drill collar are manufactured strictly from API Spec7-1 and SY5411 standard.
B. Spiral Drill Collar
Note: Spiral drill collar is used to reduce contact area with hole so as to avoid efficiently bit sticking from diffirential pressure. The drill collars are manufactired strictly according to API Spec7-1 and Standard SY5144
C. Spiral Drill Collar With Elevator Groove And Slip Groove
Note: Elevator groove and slip groove made on box thread face of slick drill collar or spiral drill collar can be used as lifting sub and safety slip when trip out. The technical parameters for elevator groove and slip groove is as per API SPEC7-1. Hardbanding is optional at customersâ?? requests.
D. Non-magnetic Drill Collar
The as cold rooled finish on both ID and OD surface with unique technical process strengthen the structure and ensures the tools with optimal resistance to stress,corrosion,cracking and the mechanical performance is greatly enganced.
Material: E75/X95/G105/S135
OD: 2 3/8" to 6 5/8"
Wall Thickness: 6.45mm to 12.7mm
Length: R1(6.10-7.01meters) R2(8.84-9.75meters) R3(12.19-13.72meters)
Hard band: Arnco100XT, Arnco200XT and Arnco300XT; Botn1000, Botn3000, TCS8000, TCS-Titanium, Armacor M etc. Also we can make according to customers' requirements.
Standard: API 5DP
RSC Type: NC26 NC31 NC38 NC40 NC46 NC50 NC55 6-5/8FH
UPSET: EU(External upset) IU(Internal upset) IEU(Internal & External upset)
Technical: Hot Rolled
Surface treatment: blank oil painting
Packing: 6/9/12 pieces in a bundle packed with steel holder
Third party inspection: BV_SGS_ISO
Usage: oil gas industry, well drill industry
Product details of API Spec 7-1 standards Drilling Rig Square Kelly and Hexagonal Kelly for Sale
Kelly is the drive part of whole drill string, it transmit the torsional energy from the rotary table to the
in the bottom of the hole. The precision-machined kelly is a heavy square or hexagonal steel bar supported by the swivel through the rotary table and connected to the first joint of drill pipe in the drill string.
Our kelly has been approved by the NS-1 certification. Straightness is the key manufacturing process.
Straightness is checked before, during and after each machning operation. Flats are precision-milled to API and NS-1 specifications. All milling is performed on specially designed rigid kelly mills.Each kelly is furnished with a pressed steel thread protectors.
Features of Kelly
They are made of AISI 4142H-4145H forged or rolled alloy structural steel. Quenching plus tempering thermal treatment will be conducted over the whole length. Its Brinell hardness can reach 285-341 on
the basis of such thermal treatment. Charpy impact energy: 54J. The formulated process can ensure that the misalignment of the hole reaches the standard wall thickness.
When ordering the Kelly please specify:
1. kelly type(square or hexagonal)
2. nominal size and overall length
3. upper and lower connection
Drill pipe is used in the drilling. Its a major drilling component which connects rotary system, hoisting
system, circulation system with drill collar and bit. Through it the rotary table drives the bit rotation, hook
drives bit up and down and drill fluid flows to the well bottom forming circle to make the bit breaks rock
and reaches continuous drilling.
1) Certificate: API 5DP, API Q1, ISO 9001, ISO 29001
2) Size Range: 60.32-168.28mm
3) OD: 2 3/8, 2 7/8, 3 1/2, 4, 4 1/2, 5, 5 1/2, 6 5/8
4) Grade: G105, S135, X95, E75
5) Wall Thickness: (0.25-0.50) inch or (6.45-12.70) mm
6) Length: R1: 6.10-7.01m; R2: 8.84-9.75m; R3: 12.19-13.72m
7) Upset style: IU, EU, IEU
A. Slick Drill Collar
Note: Drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. The Drill collar are manufactured strictly from API Spec7-1 and SY5411 standard.
B. Spiral Drill Collar
Note: Spiral drill collar is used to reduce contact area with hole so as to avoid efficiently bit sticking from diffirential pressure. The drill collars are manufactired strictly according to API Spec7-1 and Standard SY5144
C. Spiral Drill Collar With Elevator Groove And Slip Groove
Note: Elevator groove and slip groove made on box thread face of slick drill collar or spiral drill collar can be used as lifting sub and safety slip when trip out. The technical parameters for elevator groove and slip groove is as per API SPEC7-1. Hardbanding is optional at customersâ?? requests.
D. Non-magnetic Drill Collar
The as cold rooled finish on both ID and OD surface with unique technical process strengthen the structure and ensures the tools with optimal resistance to stress,corrosion,cracking and the mechanical performance is greatly enganced.
wireline BOP lubricator
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well.
The TIS lubricator and riser section range is available with the following options :
3" ID to 9" ID through bores
3ft to 20ft length options
5,000 Psi, 10,000 Psi and 15,000 Psi working pressures
Standard or sour service
Service temperature range of -29 to +121 °C
Choice of quick union or API flanged connections
Choice of bleed port connections
-
Hydraulic Ram Wireline BOP
Size: 2 1/2"- 6 3/8"
Pressure: 3000-15000PSI
Ends: Flange,Thread, Union
4130/4135 Forging
Blowout Preventers are designed to give positive protection against blowouts when operating with wire line in well services work, by providing a positive seal around wire line.
This BOP's are available basically in two types: Hydraulically Operated and Manually Operated, with configurations as desired. An equalizer valve allows the operator to equalize the pressure with lubricator pressure.
Blowout Preventers are available in sizes ranging from 2-1/2" ID through 6-3/8" ID and 3000 PSI through 15,000 PSI working pressure. Contact factory for details on pump, fittings, hoses and other accessories.
-
Packaging Details
1. Normal packing: plywood case, wooden box or pallet
2. Suitable for ocean shipping and air shipping.
3. Max. weight for each package: 1500 Kg
4. Special packing requirements should be known in advance.
5. Custom packing is available.
Blowout preventer (BOP)
BOP is shut in the well for oil testing, workover, well completion and operating process to prevent the blowout accident, totally enclosed and semi-closed two functions into one, has a simple structure, easy to operate, resistant to high-pressure characteristics is used to prevent blowouts safety oilfield sealing wellhead.
Oil drilling, installed at the wellhead casing head, used to control the high pressure oil, gas, water blowout. Wells of oil and gas pressure is high, the BOP can be the wellhead closed (shut). The shutter has four, alternatively bullied invaded mud, increasing the pressure of the borehole fluid column, so as to suppress the high-pressure oil and gas discharged from the drill pipe is pressed into the heavy mud.
Its type sub-ordinary blowout preventer, of universal blowout preventers and rotating blowout preventer. Ordinary BOP ram with full-and semi-closure, full closure type blowout preventer can seal the entire wellhead; semi-sealed shut wellhead annular cross-section of drill pipe exists. Universal BOP can start in case of emergency to cope with any size drill and empty wells.
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP part name: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
Apply to below BOP:
Brand: SK BOP. RS BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Working pressure: 2000psi-15000psi(14 Mpa-105Mpa)
Operating temperature: -18deg--121deg
Bore size: 7 1/16-21 1/4
Top & nottom connection: Flanged,studded
We can produce all types of drilling rods such as HDD drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions, pneumatic pipe-rammer etc.
Weight indicator suitable for drilling and geological exploration drilling rig or workover process instructions and record the drilling hanging weight and WOB change, it can help drillers to master the working parameters and judge the working state of drilling tools. Weight indicator by the deadline anchor, weight secondary table weight indicator and recorder.The instruments work environment temperature 40 50
Features
Can be used the drilling rig, workover drilling rig etc Hydraulic and electrical, Two types horizontal and vertical
Easy to operate
Specifications
Releasing and Circulating Overshot
Delivery on time
Standard export package
API-7-1 Standard
LAKE LT Overshot is one of the fishing tools which is fishing the pipes externally. It can catch drill collar, drill pipe, tubing, subs and other pipes. Because of the seals,the fluid can circulate with the high pump pressure after catching the fish. The top of the fish will be milled by under mill shoe. It can also work with jars to catch the stuck fishes. If the catched fish can't be release from stucking, we should release the overshot and lifting the drill string.
The lightweight Lubricators enable the wireline tool string to be introduced or retrieved from a well bore under pressure. The lubricator can be used singly also can use multiply according to the requirement of the oilfield operation, but the seal control head always be assembled on the top of the lubricator. Single Lubricator is 0.8-3 meter, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials.
The lightweight Lubricators usually consists of four basic parts: a quick union collar, a male quick union, a lubricator tube, and a female quick union.
Shear ram is composed of upper ram body ,lower ram body, top seal,right seal, left seal and tool face seal. Tool face seal is placed in th front slot of the upper ram body,with right seal and left seal on the both sides. The shear ram is installed in the BOP in the same manner sa the common ram.but need to replace tha hanger pf the main piston to hunger. otherwise it will not be used.
Other BOP parts that we supply all come from original/OEM manufacturers, they are 100% interchangeable.
1. In accordance with API Spec.16A
2. All the parts are original or interchangeable
3. Reasonable structure, easy operation, long life of plastic core
4. Adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in and shapes, better performance by combining with ran blowout preventer in the use.
Mud Pump Piston
Mud Pump Piston assembly is the important spare parts and expendable parts of oil drilling mud pumps.
Mud Pump Pistons are made of high hardness alloy steel, and they are wear-resistant, anti-corrosive and anti-distortion after heat treatment. The seal of the piston can be made of polyurethane, polyether material and it can be also made of thiakol rubber.
Type: Bonded pistons, Replaceable pistons
Material of piston hub: forged by 45# steel or 40Cr with hardening and tempering
Material of piston cup: urethane NBR rubber
Surface treatment of piston hub: by phosphating and by Oxidizing
Size: 3 ~ 8 in
Brand: NATIONAL, GD, EMSCO, OILWELL, IDECO, DRILLMEC, WEATHERFORD, BOMCO, TSC, EWCO, AMERICAN BLOCK, EWECO, HONGHUA, LS NOV, WIRTH, RONGSHENG
Horizontal Hole openers, also known as HDD reamer, are used to enlarge the diameter of a pre-drilled hole. They are custom built to specification, and come in a wide variety of sizes.
HDD is used when trenching and excavating is not practical. This drilling technology allows for a steerable trenchless way to drill underground. There are three stages, the first stage is to drill a small diameter pilot hole. The second stage is enlarge the hole with a larger diameter cutting tool called an HDD Reamer, Rock Reamer or Hole Opener. The third stage is inserting the casing pipe or other product into the enlarged hole.
Features:
1. The product is used for the reaming of the oil, gas, petrochemical, sewage, power and fiber optic pipelines in the no-dig horizontal directional drilling.
2. Directional crossing operation is widely used in unexcavated project.
3. Small torque force can be applied to hole opening with drilling machine.
4. Hole opener includes body and the cutter. 4 different types of cutter can be assembled to the body in one size for opening the hole in 4 sizes.
5. Cutter can be divided into MT type used in soft formation and TCI type used in hard formation.
1. About the Manual
The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over).
2. ADVANTAGES OF DOWNHOLE MOTOR
Increased rate of penetration.
Better hole deviation control.
Reduction in drill string failure rate.
Reduction in wear and tear of the swivel, Kelly, and rotary drives.
Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
3. CONSTITUTION
Downhole motors differ in size and performance characteristics, but they share the same basic components as follows (Fig.1) :
Crossover Sub
Safety Catch Sub
Power Section
Coupling Assembly
Bearing Assembly
Fibreglass Reinforced Plastic FRP fittings
It is a general name of the spare parts which play such functions like connecting, controlling, burning, diverting, sealing, supporting, etc. in a fibreglass pipeline system.
Production range:
Diameter: DN40-DN4000; Pressure rating: 0.1Mpa-25Mpa.
Product standards:
SY/T 6267-2006 Specification for high pressure fibreglass line pipe
SY/T 6266-2004 Low pressure fibreglass line pipe and fittings
Range of application:
Oilfield: oily water transmission; crude oil transmission;
Chemical: corrosion-proof pipeline for chemical plants; pipelines for power plants;
Municipal works: used for municipal water supply and urban drainage;
Other: internal components of GRP vessels, etc.
Product characteristics:
Excellent physical properties, light weight and high strength;
Good corrosion resistance and long service life;
Stable chemical structure and no secondary contamination;
Good insulation performance and good design ability;
Low heat conductivity coefficient and low heat loss;
Very smooth inner wall and excellent hydraulic properties;
No buildup of scale and wax, saving maintenance costs;
Easy installation and low comprehensive costs.
-
The product is installed at the center of API tubings. Ideal for the protection of any size ESP cables, control lines and chemical injection lines etc., it provides a safe and quick way of conveying and securing downhole cables into well-bores.
Features
All cable protectors have double protection to resist corrosion
All hinges are spot-welded to enhance the overall integrity of the product
Spring friction pad gripping system for superior grip
Slip and rotation resistant
Non-destructive gripping action
Designed to eliminate compression-reduced damages to the conductors
Specifications
Manufactured of low carbon steel or stainless steel
Available as cross-coupling and mid-joint protectors
Suitable for API tubing sizes from 2 3 8 to 7
Configured for flat, round or square cables, chemical injection lines, umbilicals etc.
Multichannel designis available to separate multiple lines
Customized upon request
The advantage of ceramic liners are as follow:
1. the ceramic liners can not only adapted to same tough environment such as deep oil reservior, hard stratum and severe earthless, but also can be used for offshore oil and natural gas exploration.
2. Compared with Bi-Metal liner, the serivice life of the ceramic liner is 5-10times higher, its maximum and minimum service life can reach more thna 4000 and 2000 hours respectively.
3. the Zirconia ceramic liner with have used the phase transformation toughen technology has various advantages such as wear-resistance, erosion-resistance, hight-pressure-resistance, high strength and high hardness.
4. the cost of shipment, maintaince, labor and storage in the drilling works can be reduced.
5. Compare with the Alumina liners, the zirconia liner have better toughness properties and longer service life, it can also reduce piston wear and water comsumption for lubrication.
6. Ceramic liners for drilling mud pump are widelu used in Coal, Non-ferrous metal, drilling field to improve drilling efficiency.
Model Number TWS600S PLUNGER PUMP
Pressure High Pressure 15000PSI
Power Hydraulic
Product Name TWS600S PLUNGER PUMP FLUID END
Plunger Size 3, 3.5, 4, 4.5
Condition new. stock
The fracturing pump fluid end blocks and spares are 100 interchangeable to
We can supply the Spare Parts for the Pump Models as follow
HQ 1400 4 fracturing pump SPM2000 5 fluid end
HQ 1400 2000 Frac Pump Fluid End Asembly
SPM TWS 600 Plunger Pump
SPM QWS2500 Quintuplex Plunger Pump Compatible
TWS 2000 2250 Frac Pump Fluid End Assembly
Halliburton HT400 plunger pump
Serva TPA600 pump SERVA pump TPA 400 plunger pump . TPA 600 plunger pump. TPB 600 plunger pump. TPA 400 plunger pump
GD-2500 Quintuplex Plunger Pump Compatible
OPI 1800AWS Frac Pump Compatible
High pressure low torque Plug Valves are available in 2" X 2" and 2" X 1". They come in multiple bores and are available up to 15,000 PSI for standard service and 10,000 PSI for H2S or sour gas service. Our plug valves are pressure balanced type and have replaceable metal liners between the body and plug. Repair kits are also available to increase their life and make them perform safely for longer. These manually operated valves are fitted with high stem torques and manual gearboxes.
These Plug Valves are designed to meet the needs and requirements of the oilfield. They can withstand the high erosion rates and pressures encountered in today's operating environment.
Working Principles and Features:
The plug valve consists of the valve body, plug cap, plug and etc.
The plug valve is available with the union 1502 inlet and outlet preparations (also available upon customer request). The cylinder body inner wall and side segments work together with the rubber seal segments to provide sealing.
The metal-to-metal sealing is available between the side segments and cylinder plug, featuring high precision and reliability.
Honorary Ceitificate:
Our products have been ISO9001 certified and attained API 6A,6D,API 7,7K,and API 16A&16C approvals of American Petroleum Institute.All products are fully designed and manufactured in accordance with API,ANSI,GB(national standance)and SY(industry standards)standards.
Shale shaker screen is one of the most important products for Solids Control, as an API Certified China leading manufacturer for drilling fluids shale shaker and other solids control equipments and drilling waste management equipment, The shale shaker screen factory keeps developing the word's most advanced technology for making the shale shaker screens.
Suitable for shaker: Mongoose PT, Mongoose Pro
Standard conforms: API
Frame material: Composite
Screen material: Stainless steel
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well.
options:
The TIS lubricator and riser section range is available with the following options :
3" ID to 9" ID through bores
3ft to 20ft length options
5,000 Psi, 10,000 Psi and 15,000 Psi working pressures
Standard or sour service
Service temperature range of -29 to +121 �°C
Choice of quick union or API flanged connections
Choice of bleed port connections
-
TWS 600 triplex plunger pump is suitable for cementing and acidizing operations. Its short length is suitable for back-to-back installation of two pumps on the vehicle / skid, and the total width is less than 102 ". The newly developed tpe600 pump can more effectively prevent the medium leaked from the hydraulic end from entering the power end.
Well Service plunger Pump packing set made from high quality materials for extended service life in all applications. We offer a variety of compounds for all types of environments including high pressure, abrasive and high temperature. We offer both complete sets and replacement sets.
Replacement Set Header Ring, Pressure Ring, Top Adapter and Wiper Ring
Complete Set Header Ring, Pressure Ring, Top Adapter, Brass Lantern Ring and Adapter
Material
Buna NBR Nitrile fabric
HSN HNBR,
Neoprene,
Fluorocarbon Perfluoroelastomer,
Filled PTFE blends,
PEEK
Aramid Kevlar fabric HNBR composite
other elastomer and plastic materials.
Specifications
Single joint elevator
1. Type:sj
2. Api spec 8c iso9001: 2008
3. Hoisting tools for handling casing.
Single joint elevator
Single joint elevators are designed and manufactured according to api spec 8a-specification for drilling and production hoisting equipment. The elevators are hoisting tools for handling casing and etc in oil and gas field.
Model: sj, sp, sjx
Size: 3 1/2"-14"
Load: 5tons, 6tons
Dd center latch elevators
The dd type elevators are hoisting tools for handling 90â°shoulder drill pipe, casing, tubing and drill collar in oil and gas field.The elevators are designed and manufactured according to api spec 8c-specification for drilling and production hoisting equipment.
Technical specification:
Main technical parameters:
ModelSize (in)Rated capacity
(short tons)
Drill pipeCasingTubing
Dd-1002.3/8-5.1/24.1/2-5.1/22.3/8-4.1/2150
Dd-2502.3/8-5.1/24.1/2-5.1/22.3/8-4.1/2250
Dd-3502.3/8-5.1/24.1/2-5.1/22.3/8-4.1/2350
The lightweight Lubricators enable the wireline tool string to be introduced or retrieved from a well bore under pressure. The lubricator can be used singly also can use multiply according to the requirement of the oilfield operation, but the seal control head always be assembled on the top of the lubricator. Single Lubricator is 0.8-3m, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials.
The lightweight Lubricators usually consists of four basic parts: a quick union collar, a male quick union, a lubricator tube, and a female quick union.
1. Length of the Lubricator Riser could be customized according to working condition.
2. Drilling fluid, frac acidizing fluid, oil, gas and water can be working media.
3. Connection end of the Lubricator Riser could be flange or union.
4. Our Lubricator Riser is designed and manufactured according to API 16A.
quad rams slickline BOP/wireline BOP
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well.
options
The TIS lubricator and riser section range is available with the following options :
3" ID to 9" ID through bores
3ft to 20ft length options
5,000 Psi, 10,000 Psi and 15,000 Psi working pressures
Standard or sour service
Service temperature range of -29 to +121 °C
Choice of quick union or API flanged connections
Choice of bleed port connections
-
1. Structure of FRP Process Pipe Description
1) Anti-fouling, anti-moth, non-rust, keeping water from pollution; It also apply to carry the polluted water, slurry and seawater;
2) The ability of water resistance and corrosion resistance can prolong product service life;
3) The connection of insert makes air proof excellent; project cost can be reduced without building concrete protect layer;
4) Few joint and various of joint methods not only reduce water resistance but also project cost;
5) Good insulation, heat resistance, combustration resistance; No distortion in high temperature of 80-100 degree;
6) With light weight, high strength, the hoisting cost can be decreased, also expedite installation proceeding;
7) Low maintenance expense: no need for anti-rust, anti-pollution, insulation, heat preservation and the relative examination and repair; cathode protection free also can save the project maintenance cost.
-
Specifications
1)bop remote control system
2)control bop&valve
3)automatic remote control system
4)double protective device
5) api spec 16d
Bop remote control system
Bop remote control system is special equipment, which is used to control bop, hydraulic chock, kill system and diverter equipment, and indispensable equipment for blowout preventer during drilling or workover in petroleum and natural gas industry.
The function of the remote control system for surface mounted bop stacks is preparing and prestoring enough hydraulic oil and controlling its flow direction, in order to open or close bop quickly. As the hydraulic oil used, the pressure drops down, when the pressure lowers to a certain value, the accumulator unit will renew the hydraulic oil automatically, to keep the pressure in a certain high value.
Shale shaker screen is one of the most important products for Solids Control, as an API Certified China leading manufacturer for drilling fluids shale shaker and other solids control equipments and drilling waste management equipment, The shale shaker screen factory keeps developing the word's most advanced technology for making the shale shaker screens.
Applicable Industries Construction works , Energy & Mining
Video outgoing-inspection Provided
Machinery Test Report Provided
Wire cloth material 316ss
Frame material Composite
Suitable for shaker Mongoose PT, Mongoose Pro
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well.
options
The TIS lubricator and riser section range is available with the following options :
3" ID to 9" ID through bores
3ft to 20ft length options
5,000 Psi, 10,000 Psi and 15,000 Psi working pressures
Standard or sour service
Service temperature range of -29 to +121 °C
Choice of quick union or API flanged connections
Choice of bleed port connections
-
The dies made from high-quality alloy steel in our company.
The dies are chemically heat-treated for surface hardness.
The dies And Slip Inserts are wear-reciting, corrosion-resistance.
Customized products are available.
Qualified API certified manufacture.
Drilling dies are made of high-quality alloy steel and are chemically heat-treated for surface hardness. They feature wear-resisting, corrosion-resisting and have a long service life. We can also design and manufacture special inserts according to customers requirements
