High altitude low pressure simulation test chamber
Altitude Chamber For Sale
Altitude Test Chambers
Temperature testing at altitudes up to 100,000 feet.
Grande can provide custom-built chambers for simultaneous testing of temperature and low-pressure altitude conditions. Two common applications are:
Testing of avionics or other aerospace equipment to simulate actual conditions it might experience.
Simulation of high-altitude conditions like might be found in mountainous regions.
NOTE: Altitude test chambers are custom systems, and differing requirements may significantly change the cost and utility requirements. Please let Grande know as much detail as possible about your anticipated testing specification/method, and we can provide you with a tailored system for your requirements.
Features
Temperature range from -70 to 200C
Altitude range from ground to 100,000 feet
Optional humidity control when altitude system is off
Chamber interior size specified by customer
Automatic altitude control, integrated with temperature controller No manual setting of altitude level!
Vacuum pum p sized for climb/dive rate required by application
Viewing window and cable ports available
I. Application 1.1 Dust-proof test box is designed and manufactured according to GB4208-93 (equivalent to IEC60529-2001) "Shell Protection Grade (IP Code)" and is suitable for sand and dust test of electrical products with the first characteristic digits of 5 and 6 (IPX5 and IPX6). 1.2 The test chamber can provide non-laminar vertical circulating airflow of dust, which can be controlled regularly. It is equipped with a vacuum pump to pump air into the outer shell of the tested product, and it can adjust the pumping volume and pressure difference.In addition,the air temperature control device is installed in the chamber to ensure that the test is carried out under the standard environmental conditions. 1.3 According to the standard requirements, this test chamber adopts the artificial analogy dust environment to test the dust-proof ability of the tested products, and its specific requirements and eligibility criteria should be in accordance with GB4208-93 (IEC60529-2001) or product-related standards. 2. Structure and Material Material: both inside and outside gallbladder adopt SUS high grade stainless steel plate door: tempered glass door. Sample outlet: dust-proof socket Controller: programmable controller (the controller has the following arbitrary setting control functions). A. Dust blowing time (stop and blow) h/m/s adjustable B. Cycle: arbitrary adjustable C. Preset test time: 0s to 999h99m99s arbitrary adjustable D. Power on: break through break Metal screen size: nominal diameter 50 um, nominal distance between lines 75 um Blower: all plastic centrifugal fan Vacuum system: equipped with pressure gauge, air filter, pressure regulating triple parts, connecting pipe (vacuum pump with another, when ordering instructions) Remarks: The test box can meet the requirements of protection grade test for household appliances, low-voltage appliances, automobile and motorcycle parts in GB2423, GB4706, GB4208, DIN. The device can not meet the sand and dust test in GJB150.
Different types of Environmental Chambers are manufactured by Bell Experiment Equipment Co., Ltd. For example Temperature Cycling Test Chamber, Temperature(Humidity) Test Chamber, Low-pressure(Altitude Simulation) Test Chamber, Thermal Abuse Test Chamber, Thermal Shock Test Chamber, Salty Mist Spray Test Chamber, Rain Simulation Test Chamber, Sand Dust Test Chamber, Walk-in Temperature Humidity Test Chamber, etc.
Envisys altitude chambers are designed to test the durability of products.We manufacture altitude test chambers to simulate extreme condition, this environment chamber combines altitude chamber and humidity chamber to subject the testing products under various environment
Sand and Dust test chambers simulate dust and sand climate condition to evaluate the effects on products in dust-filled environment, the purpose is to test product sealing performance. Dust test chambers are applied in home appliance enclosure, electronic and electric products, coatings, etc. Climatest Symor® manufactured sand and dust chambers are specially designed to test products against dust ingress by following IEC60529 standard.
Sand and Dust test chambers simulate dust and sand climate condition to evaluate the effects on products in dust-filled environment, the purpose is to test product sealing performance. Dust test chambers are applied in home appliance enclosure, electronic and electric products, coatings, etc. Climatest Symor® manufactured sand and dust chambers are specially designed to test products against dust ingress by following IEC60529 standard. .Suit IP5X and IP6X test .Interior chamber made by SUS304 stainless steel. .Exterior material is steel plate with protective coating. .Dust re-cycle blowing by circulating pump. .Dust collection section is located on bottom of test chamber. .A heater fixed into test chamber to keep dust dry. .A viewing window with a manually controlled wiper. .Programmable color display touch screen controller which located on right side of chamber. .The air velocity for the blowing of dust is controlled by a dust blowing mechanism that includes a motor and blower combination. .A stainless steel shelf for placing test specimens. .Chamber inside equipped with power interface for test specimen .Lighting in test chamber .Vacuum system for specimen .Bottom install 4 castors for ease moving, and with brakes function .Safety protection Working principle
UV accelerated aging test chamber can simulate environmental conditions such as self-climate ultraviolet rays, rain, high temperature, high humidity, dew condensation, darkness, etc. By reproducing these conditions, it is merged into a cycle, and it automatically executes the number of cycles completed. In this process, the equipment can be used for automatic monitoring of blackboard temperature and water tank temperature; by configuring irradiance measurement and control device (optional), the irradiance can be measured and controlled, and the irradiance is stable at 0.76W/m2/340nm or specified setting. Fixed value, greatly extending the service life of lamps.
Benchtop Temperature humidity Test Chambers are Small, bench-top test chamber for simulating temperature and humidity environments. Included only temperature, temperature and humidity test chambers. Widely used in electronics, automotive, manufacturing, research and laboratories. Its very good advantages are small, desktop, small footprint, portable, stable performance and Full function. A Benchtop Environmental Chamber offers flexibility, uniformity, and control accuracy. Small & Affordable.
Climate Chambers including different kinds of Temperature( Humidity) Test Chamber, Low-pressure(Altitude Simulation) Test Chamber, Salty Mist Spray Test Chamber, Rain Spray Test Chamber, Thermal Abuse Test Chamber, High-Temperature Aging Test Chamber, etc. Contact us freely!
Environmental Chambers including different kinds of Temperature( Humidity) Test Chamber, Low-pressure(Altitude Simulation) Test Chamber, Salty Mist Spray Test Chamber, Rain Spray Test Chamber, Thermal Abuse Test Chamber, High-Temperature Aging Test Chamber, etc. Contact us freely!
