Hydraulic Poppet Cartridge Valve

At the beginning of this year, received an order from African customer for excavators with a delivery time of 2 months, which means that all accessories must be in place within 1 month, including 600 hydraulic cartridge valves. The production time for the factory is a little more than 2 weeks. The purchaser Peter sent the order information of the hydraulic cartridge valve to all the hydraulic valve manufacturers he contacted before at the first time. More than 20 hydraulic valve manufacturers said that they could not complete the order of the hydraulic cartridge valve in such a short time, and it would take at least 3 - 4 weeks. His supervisor was not satisfied with this delivery time and asked him to find a new hydraulic valve manufacturer. After the email was sent, there was basically no sound. Peter was very helpless and worried. Peter asked Mark for help. HYDRAULIC VALVE to ask if could produce 600 hydraulic cartridge valves in 2 weeks and CC Peter, and joking at the end of the email that if HYDRAULIC VALVE could not complete the hydraulic cartridge valve order, then there is no need to waste time on looking for a new hydraulic valve manufacturer. According to the drawings they sent, technical department found that this was very close to the hydraulic cartridge valve supplied to a Russian customer last year, so the time in the early stage of the production of the hydraulic cartridge valve was saved. After the price of the hydraulic cartridge valve was approved, the process data could be configured on the computer on the same day and the production could be carried out the next day. 2 weeks later, 600 hydraulic cartridge valves were delivered on time, which was the first of all the accessories purchased by Peter to arrive at the company's warehouse. Peter didn't expect that the hydraulic cartridge valve he was most worried about was the first to be completed. Peter appreciated the advice from Mark and was also surprised that could complete this in 2 weeks, while his previous hydraulic valve suppliers needed 3-4 weeks. Mark told : 1. is his most trusted hydraulic valve manufacturer. can surprise him every time when the hydraulic valve order is urgent. 2. has a large amount of data storage and clear classification. For hydraulic valves with relevant data, they can use the most advanced UG / SOLIDWORK software and finite element analysis method to configure process data in 2 hours, which is 3-6 times faster than that of other suppliers. 3. is equipped with advanced machine tools imported from Swiss, coupled with their own modified fixtures, the production speed is accelerated and man-made errors are avoided at the same time. After listening to the introduction realized that only a good hydraulic valve supplier can make his purchasing smooth. successfully completed this urgent order.

Supplier: Micro silica (silica fume), silica, fly ash, pozzolano, ggbfs and white cement, other cementatious materials and factory/plants specialized spare parts & equipments, automation & switchgear, drives & transmission spares, instrumentation & pump, pneumatic & hydraulic spares, valves & actuators, mechanical parts, high carbon ferro chrome, foundry pig iron, iron ore concentrate, chromite ore, antimony ore, silicon metal 441 (powder), ferro silicon (fesi), iron ore pellet, copper concentrate

Zander is from a hydraulic manufacturing company in Greece. In the first half of this year, their company planned to upgrade the old logistics crane and put it back on the market. Its main goal is to improve its stability by 20% compared with its peers. The optimization of the hydraulic cartridge counterbalance valve is the key, but the original hydraulic cartridge counterbalance valve manufacturer has no ability to innovate. Zander found a local hydraulic cartridge valve manufacturer to optimize the structure and make samples. However, during commissioning, when the load of the system drops, the pressure fluctuation cannot exceed that of the peers, and the hydraulic cartridge counterbalance valve cannot avoid load interference. The local hydraulic cartridge valve manufacturer has no ability for further improvement. 2 months passed by, but there was still no solution. The boss pushed for progress many times, and Zander was worried. Zander found AAK on Google, noticed that AAK had released some customer cases about hydraulic cartridge counterbalance valves, and sent us an email. According to the schematic diagram of the hydraulic system and the original hydraulic cartridge counterbalance valve drawing provided by him, AAK engineer informed that the structure optimized by his local hydraulic cartridge valve manufacturer was not reasonable and needed to be adjusted. AAK has a trick to prevent the hydraulic cartridge counterbalance valve from being affected by the load. Zander asked for AAK samples. After 45 days, AAK sent 20 samples of hydraulic cartridge counterbalance valves. 3 months later, Zander sent an order for 500 hydraulic cartridge counterbalance valves, and told us that their technical department was very satisfied with AAK hydraulic cartridge counterbalance valves. Not only did they overcome the load impact, but also improved the stability of their new logistics crane by more than 20%. In the promotion stage, the booking was good, and the boss was happy. AAK hydraulic cartridge counterbalance valve can stably control the opening of the valve spool without being disturbed by the load, and its stability is higher than that of its peers, because we have tricks on optimizing the structure. AAK hydraulic cartridge counterbalance valve is composed of a valve body, a valve seat, a main valve spool, a pilot valve spool and a pilot mechanism. The valve seat is connected with the valve body and forms a connected first channel. The extended end of the valve seat butts against the pilot mechanism and forms a second channel. The main valve spool is provided with a throttling slot. One end of the pilot valve spool slides and is arranged in the inner cavity of the main valve spool. The other end is connected with the pilot mechanism. The pilot valve spool is equipped with a throttling slot. The pilot valve spool is connected with the inner cavity of the main valve spool as a balanced structure.

AAK 3 Skills Solved the problem of Hydraulic Counterbalance Cartridge Valve Caused by Back Pressure and helped Dorian's Equipment to be Promoted Smoothly Dorian is from a Greek hydraulic equipment company and is responsible for the procurement of hydraulic components. At the beginning of the year, they developed a new hydraulic crane, which requires the use of hydraulic counterbalance cartridge valve. Dorian worked with a local manufacturer to make samples. During the equipment commissioning, it was found that the hydraulic counterbalance cartridge valve had no overflow function due to the back pressure. The hydraulic system was tested separately, but it was normal. Dorian felt that there was a hidden danger in the original design of the hydraulic counterbalance cartridge valve. The engineer thought that the function of the hydraulic counterbalance cartridge valve was not up to standard. Dorian was a little embarrassed. Dorian found website of AAK hydraulic valves on Google, and noticed that AAK had been supplying first-line brand hydraulic valves such as HydraForce, SUN Hydraulics, and HAWE for many years. Maybe he saw hope and sent an email to ask for help. According to what he said, the hydraulic counterbalance cartridge valve has no overflow function under the influence of the back pressure of the closed central circuit. I told him that it was probably a flaw in the design of the original hydraulic counterbalance cartridge valve. According to his hydraulic schematic diagram and original drawing of hydraulic counterbalance cartridge valve, AAK engineer not only determined that the problem was in the original design, but also had a solution. After knowing these, Dorian asked AAK to make samples. After 50 days, AAK sent 10 hydraulic counterbalance cartridge valve samples. 4 weeks after AAK hydraulic counterbalance cartridge valve samples were sent, Dorian told me that the equipment debugging was smooth and the market promotion had been started. I was asked to wait patiently for the batch order. The rapidity and stability of AAK optimized hydraulic counterbalance cartridge valve is the key to smooth equipment commissioning. It solves the contradiction between the rapid response and stability of the equipment in the early stage, and the flow change is moderate, the movement is stable, the safety overflow function is not affected by the back pressure, which can be applied to the closed center and open center hydraulic systems. 1. The middle section of the hydraulic counterbalance cartridge valve spool is provided with an inner concave ring, which is also the valve inlet. The right end of the inner concave ring has a cone, on which there is a two-stage stepped taper ring. The cumulative area of the cone is the same as the area of the cylinder end face at the right end of the counterbalance cartridge valve spool.

Andy is our old hydraulic valve customer in the The hydraulic cartridge valves he purchased from in previous years always has a standard of machining surface roughness around 0.8m. In last year, Andy sent an email to inform us that in the future, the machining surface accuracy of their hydraulic cartridge valves will be improved to within 0.3m. engineers believe that based on the current equipment system, it is very difficult to improve the machining surface accuracy of hydraulic cartridge valves to 0.3 m. It is also very difficult to find such a hydraulic cartridge valve manufacturer I know that has only two options, either give up the business of his hydraulic cartridge valves or accept his accuracy standard. This is the first time I have faced the choice of "standing in line" since I joined the hydraulic valve industry. The cooperation with Andy has always been trustworthy, pleasant and efficient. doesn't want to give up such customers. After two rounds of communication internally, technical team has not reached a consensus. I have to call my retired master and hope to hear his opinions. My master told me that this is a rare opportunity to catch up with and surpass the accuracy of international hydraulic cartridge valves. The roughness of the working surface under 0.3m is rare in , but some European hydraulic cartridge valve manufacturers have this strength. must first start with the equipment, and then select the most experienced operators from the factory for special aircraft training, so as to have the opportunity to compete with those top European hydraulic cartridge valve manufacturers. American HARDINGE precision CNC lathe is worthy of a try. At present, none of the domestic hydraulic cartridge valve manufacturers have this equipment. After contacting the equipment manufacturer, technical team took the hydraulic cartridge valves produced for Andy before to the equipment factory, and asked the engineer of the equipment manufacturer to go directly to the machine for proofing. A week later, we sent the hydraulic cartridge valve samples to Andy and asked them to test the accuracy parameters. Two weeks later, Andy informed that the previous hydraulic cartridge valve accuracy test was completed twice. This time, hydraulic cartridge valve was tested 4 times, and the accuracy fully met the standard. At the same time, he told me that after receiving the accuracy improvement notice, the other 3 domestic hydraulic cartridge valve manufacturers directly gave up, and only dared to test the sample and succeeded in one test. He was very surprised. The machine tool to be introduced by has advantages in accuracy. The parameters of the machine tool: spindle speed up to 6000r/ min, spindle radial run out 0.0008mm, positioning accuracy (X/Z)

Bauer is a purchaser of American PowerTeam company. In recent years, the purchasing of hydraulic valves has been smooth. Last October, PowerTeam received a test order for a hydraulic power unit from a South African customer. The customer requires to receive the prototype in the shortest time. If the prototype test is normal, there will be a series of orders later. The boss attached great importance to it and asked the technical team to design and develop it. What the engineers are most worried about is that the use frequency of the hydraulic power unit is twice that of the conventional one. Therefore, the durability of the hydraulic threaded cartridge valve used should be at least more than 2 million times. According to the parameters and working conditions of the hydraulic threaded cartridge valve, Bauer contacted more than 20 new and old hydraulic valve manufacturers. After one-to-one communication, he selected 5 hydraulic valve manufacturers to make samples for testing. 20 days later, Bauer received 6 samples of hydraulic threaded cartridge valves. After the engineers installed and tested, none of the hydraulic threaded cartridge valves could pass the durability test for 2 million times. Bauer had a second round of communication with the manufacturers, 3 of the hydraulic valve manufacturers said they would re-sample the hydraulic threaded cartridge valve. After the second round of testing, although the durability of hydraulic threaded cartridge valves has been improved, they have not reached 2 million times. Bauer was embarrassed. He might have killed the big order. After communicating, the manufacturer advised that there was nothing he could do. Bauer was very worried and had to try his luck with a new hydraulic valve manufacturer. He found AAK hydraulic valve on Google and searched AAK. After browsing, Bauer thought that AAK might be able to successfully sample this hydraulic threaded cartridge valve. After receiving the working condition requirements and drawings of the hydraulic threaded cartridge valve from Bauer, AAK engineer made analysis and determined that they were more than 95% confident to make it successfully. After 2 rounds of testing, the engineer defined the production process of proofing and circled the technical difficulties. After 20 days, AAK sent the samples of the hydraulic threaded cartridge valve. Unexpectedly, 2 months after the samples of hydraulic threaded cartridge valves were sent, we received the official order of 600 hydraulic threaded cartridge valves from Bauer. Bauer said that the equipment commissioning of South African customer was successful and the operation was stable, they were very satisfied with the quality of PowerTeam. The owner was very satisfied that Bauer found such a great hydraulic valve manufacturer and designated AAK as their exclusive supplier of hydraulic threaded cartridge valves.

The opening and closing characteristics can reach 95% opening rate and 90% closing rate, the operating pressure swing is not greater than ± 0.1MPa, and the design service life is more than 1 million times. For this high precision, high stability and high durability 3-high hydraulic threaded cartridge valve, Jacob is surprised that the AAK hydraulic valve is successful in one-time sample, while most hydraulic valve manufacturers are not able to do at all. Jacob is a purchaser of Intermot company in Italy. The company has a newly developed hydraulic motor, which needs to use hydraulic threaded cartridge valve. This motor is a high-frequency operation and has strict requirements for various parameters, especially for the parameters of hydraulic threaded cartridge valve, which has 3 high requirements of high accuracy, high stability and high durability. The owner asked Jacob to complete the procurement of this batch of hydraulic threaded cartridge valves within 60 days. He selected 4 from the original hydraulic valve suppliers to make samples. After installation, it was found that the opening and closing characteristics of hydraulic threaded cartridge valves can only reach 90% opening rate and 85% closing rate, which is 5% lower than the parameter requirements. Even the operating pressure swing of some hydraulic threaded cartridge valves exceeds 0.2MPa. In the last step testing, only 2 or 3 samples can be intact after 1 million durability tests. If all three requirements should be reached at the same time, nearly none of the samples meet the standard. Due to the limitation of equipment, the original manufacturer said it was difficult to improve significantly. Jacob learned about AAK hydraulic valve under the introduction of its peers. After browsing AAK website (www.aakindustry. com), he felt that the AAK hydraulic threaded cartridge valve might help him. After receiving the parameter requirements and drawings of his hydraulic threaded cartridge valve, we found that the requirements of this hydraulic threaded cartridge valve are not simple, but our technical team needs to chew this hard bone and gave reply to Jacob that if it goes well, the samples of the hydraulic threaded cartridge valve can be sent within 20 days. On the contrary, it needs more time for proofing. Jacob hopes that AAK hydraulic threaded cartridge valve sample will be successful, which just meets the delivery time required by the owner. After 15 days, AAK sent the hydraulic threaded cartridge valve samples successfully. After installation and test by the engineer, all parameters of the hydraulic threaded cartridge valves are qualified and meet the 3 high requirements of high accuracy, high stability and high durability. After 25 days, the shipment of the hydraulic threaded cartridge valve was delivered as scheduled.

Brooke is the purchasing manager of the American company Vickers and has been working with AAK for more than 6 years. One morning last month, he emailed us that his job was finally saved. I was surprised how a veteran suddenly said that he had finally "saved his job". In private, I learned that it was because he had some disagreements with his owner and quarreled. The owner almost let him go. Because his owner is not satisfied with the price of AAK, sometimes the price of AAK for the same hydraulic valve will be more than 20% higher than that of other Chinese hydraulic valve manufacturers. At the cost meeting last month, the owner proposed to replace the Chinese hydraulic valve manufacturer, but Brooke insisted that AAK is the most cost-effective Chinese hydraulic valve manufacturer, so it is not recommended to replace it. On the contrary, he can only leave. The year before last, the owner went to Shanghai PTC exhibition with him to develop suitable Chinese hydraulic valve manufacturers for cooperation. They did get acquainted with many Chinese hydraulic valve manufacturers at the exhibition, but after more than 2 years of testing samples and running in, Brooke found that there is really no second Chinese hydraulic valve manufacturer that can compare with AAK in all aspects. AAK is not only reliable, but also has temperature, whether it is cooperation, delivery, quality, after-sales etc. Brooke remembers the support and help from AAK hydraulic valve over the years. On one occasion, due to the urgent delivery time of a South African customer, Brooke could not find a factory with stock at that time and could only customize it. Most Chinese hydraulic valve manufacturers said that the lead time from sampling to delivery should be at least 2 months. AAK stopped a production line and asked technicians to work overtime to speed up the production. Samples can be produced in 30 days and shipped in 45 days. It is precisely because of the temperature of AAK that Vickers has the opportunity to cooperate with this big customer in South Africa. Every time, AAK products can be successful at one time during testing. They are the best among all Chinese hydraulic valve manufacturers in terms of accuracy, concentricity, fatigue resistance and durability. Brooke's deepest memory is that one time, the South African customer mentioned that the hydraulic valve used for more than 2 years often stuck during work and asked for replacement. After receiving the news, AAK immediately told Brooke to ask the customer to return the goods. After inspection, it turned out that the hydraulic oil used by the South African customer was not clean and caused the problem. Later, AAK disassembled and cleaned the valve and sent it again, and asked the customer to change the hydraulic oil. Until now, no problem has been mentioned. If this happened to other Chinese hydraulic valve manufacturers, their reply must be that this has passed the warranty period.