Fzb series fluorine plastic linning self-priming pump
Patent product, base on ihf centrifugal pump structure, installed the double volute self-priming pump casing on ihf pump, simple structure and for widely usage.
Corrosion and pressure resistance, wet parts are made of corrosion resistant fluoroplastic, with these advantages, fzb pumps available to high corrosive applications. Pump base plate is made of metal; make the pump available to high pressure resistance applications.
Easy for operating
Developed for low sump application, pump installed above the sump or tank, which easy for operating, maintenance and repair.
Min model no 25fzb 18l pumping flow capacity 3.6 m3/h, 18 meter pump head , equipped with motor power 2.2kw
Max model no 100fzb 30l pumping flow capacity 100 m3/h , 30 meter pump head, equipped with motor power 18.5kw
Model no 50fzb -30l
50 pump inlet diameter are 50mm
Fzb single stage end-suction centrifugal pump
30 pump head 30 meter
L pump connection by coupling
Pump flow capacity 12 m3/h
Motor 4kw
Self-priming height 3 meter .
Medium
Acids & lyes
Waste water
Chlorine water
Electrolyte
Application
Chemical industry
Pesticide
Acid and alkali making
Papermaking
Acid pickle process
Electronics industry
Structural characteristics Unique motor design (permanent split capacitor type) Gun metal impeller Internally mounted mechanical seal Low power consumption Fitted with terminal block Light in weight-portable Compact mechanical design Better aesthetics and finish Glass fill nylon nozzle and venturi Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal overload protector Insulation class b Protection ip 51
0.5 hp regular-30m head-2.6amps-2000lph per hour at 18m. 10kgs
Self Priming Monoblock Pumps
Structural characteristics Unique motor design (capacitor start and run type) Forged brass impeller Internally mounted mechanical seal Low power consumption Fitted with terminal block Light in weight-portable Compact mechanical design Better aesthetics and finish Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal overload protector Capacitor inside/outside the terminal box Insulation class b Protection ip 51
Self Priming pumps are self priming centrifugal pumps , the dual seals of the pump consists of mechnical seals and sketleton seals, the pump is compact in constructure, fine in performance , convenient in maintain and saving about 50% water compare to furrow irrigation. 1. The trans medium's temperature to pump shouldn't be higher than 40degree; 2. Trans medium's pH VALUE: 6~8; 3. The grain diameter of the solids in the water is no bigger than 0.2mm 4. Single-phase pump 5. Self-priming pump, with high aborption and high lift-head 6. Brass impeller 7. Adopt skeleton-type oil sealing or mechanical sealing. 8. Based on general self-priming pump, automatic function is added and the pump can be applied to hot water.
Supplier: Submersible pumps. Self priming pumps. Centrifugal monoblock pumps
Supplier: Self priming pump, centrifugal pump, diaphragm pump, gear pump, diesel engine pump
Structural characteristics Unique motor design (capacitor start and run type) Forged brass impeller Internally mounted mechanical seal Low power consumption Light in weight-portable Compact mechanical design Better aesthetics and finish Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal protector Capacitor inside/outside the terminal box Capacitor inside/outside the terminal box Insulation class b Protection ip 51
The SCM2 series are with two back to back impellers, it is use for high head values but if hard to reach with single impeller centrifuagl pump. Suitable for civil and industrial uses to pump clean water and chemically non-aggressive liquid. Particularly be used for increasing the supply pressure, feeding boilers and loading extremely. These pumps should be installed in a covered area, protected against the weather. Pump body: Cast iron Impeller: Brass Motor: Closed, externally ventilated Insulation class: B(Class F if required) Protection class: IP44/IP54 Duty: Continuously rated Mechanical seal: 16, 18, 25 ceramic steatite/metalized carbon Type: SCM2-32 Power: 0.75HP Q. Max: 90l/min H. Max: 30m L*W*H: 380*210*240(mm) Type: SCM2-40 Power: 1HP Q. Max: 100l/min H. Max: 35m L*W*H: 380*210*240(mm) Type: SCM2-52 Power: 1.5HP Q. Max: 130l/min H. Max: 48m L*W*H: 415*255*320(mm) Type: SCM2-60 Power: 2HP Q. Max: 140l/min H. Max: 52m L*W*H: 415*255*320(mm). Type: SCM2-68 Power: 3HP Q. Max: 200l/min H. Max: 60m L*W*H: 480*290*350(mm) HS Code: 841381 Trademark: Haitai pump or OEM Standard: CE, GS Productivity: 50000PCS/Month Unit Price/Payment: T/T Origin: China Packing: 1PCS in 1 Box Min. Order: 300 PCS Transportation: by Sea Theory: Jet Pump Structure: Single-stage Pump Power: Electric Type: Jet Pump Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe.
