Self Priming pumps are self priming centrifugal pumps , the dual seals of the pump consists of mechnical seals and sketleton seals, the pump is compact in constructure, fine in performance , convenient in maintain and saving about 50% water compare to furrow irrigation.
1. The trans medium's temperature to pump shouldn't be higher than 40degree;
2. Trans medium's pH VALUE: 6~8;
3. The grain diameter of the solids in the water is no bigger than 0.2mm
4. Single-phase pump
5. Self-priming pump, with high aborption and high lift-head
6. Brass impeller
7. Adopt skeleton-type oil sealing or mechanical sealing.
8. Based on general self-priming pump, automatic function is added and the pump can be applied to hot water.
We Manufacture REGENRATIVE SELF PRIMING PUMPS From 0.50H.P To 1.5H.P
Self Priming Pumps (Sharp Type)
Self Priming Pumps (V-Type) MATERIAL OF CONSTRUCTION: Shaft : S.S. 410, Motor Body : Aluminium / Cast Iron, Impeller : Brass, Casting Parts : Graded Casting, TECHNICAL DETAILS: Head Range : Up To 36 mtrs, Discharge Range : Up To 50 lpm, Delivery : 25 X 25mm, Power Rating : 0.5 H.P., Voltage Range : 180 V TO 240 V (1-Phase). SALIENT FEATURES: Easy To Install, Highly Efficient, Law Power Consumption, Use Graded Varnish To Reduce Corrosion In Stator, Noiseless & vibration free motors, All Parts Machined On CNC Machine Only
Self-priming pump KD series Motor Model:KD-Self-priming pump Materical:PP Power:10hp Pole:2P Primary ring:Silicon Mating ring:Ceramic Rubber:EPDM Spring:SUS316 Frequency:50HZ Caliber:3"X3" Max.capacity:1133l/min Max.head:23.5m Weight:140.0kg
Self-priming pump CBH-80 and its units (hereinafter referred to as pumps or units) are designed to pump liquids without mechanical impurities. Pump CBH-80 is designed to pump the following liquids: water, gasoline, kerosene, diesel fuel and other liquids with a viscosity of not more than 2 10-6m2/s at a temperature from -40 to +50 and a density of not more than 1000 kg/m3. Symbol of a pump or electric pump unit: C self-priming H-pump 80- DN inlet and outlet pipe, mm Specifications of Pump CBH-80 The main technical characteristics of the pump are shown in Fig . 1 and in Table 1 at testing it on water at a temperature of 20 C and a rotational speed of 1450 rpm.
Self Priming Pumps (Super Suction Type) Available in 0.5 H.P. & 1 H.P., Head: Up To 50 mtrs, Discharge: Up To 3000 lph, Supply: 1-Phase, Delivery Size : 1 X 1, Winding : Copper (E.C.Grade), Impeller: Brass, Motor Body: Aluminium / Cast Iron, Available With Thermal Over Load Protector (T.O.P.).
JET-M SERIES SELF-PRIMING PUMP JET-M series are suitable for pumping clean water.They are particularly suitable for domestic applications such as supply water from well,pool etc,the automatic distribution of water by surge tanks and pressure switch,gardening,andincreasing of water pressure. Working conditions Max Temperature of Fluid up to+40 Max pressure:8bar. Max Ambient Temperature up to 40 Standard data and equipment: Single phase 220v/50Hz,Brass or plastic impeller,carbon steel motor shaft, with thermal protector insitde. Other model and material such as tThree phase,110v,60Hz,dual voltage, stainless shaft,etc,will be available upon request.
Forged Brass Impeller Internally mounted mechanical seal Low power Consumption Fitted with terminal block Light in Weight-Portable Compact Mechanical design Better Aesthetics and Finish Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal overload protector Capacitor inside/outside the terminal box Insulation class B Protection IP 51
Forged Brass Impeller Internally mounted mechanical seal Low power Consumption Fitted with terminal block Light in Weight-Portable Compact Mechanical design Better Aesthetics and Finish Operating Conditions Clean water not containing abrasive particles Liquid temperature up to 60¦ C Ambient temperature up to 40¦ C Total suction lift up to 6 Meters Motor 2-Pole, Single phase, 50 Hz, 220-240 V with thermal overload protector Capacitor inside/outside the terminal box Insulation class B Protection IP 51
