Product description:
Lead-acid, lithium universal charge controller automatically adapt to 12v / 24v system
Three batteries optional. Lead-acid, colloidal, lithium iron phosphate batteries. Select by dip switch
Using pwm three-phase charging technology
Usb port charging controller with 2 usb ports, output voltage usb 5.0v / 2100ma
Full electronic protection
Remote controller charger Charge modePWM System voltage12V/24V Charge current: 10A/20A Output voltage: 12V or 24V Battery typeLead acid (GEL, AGM, flooded) Application 1.Street light 2.Advertising lights -
Charge modeïPWM System voltageï12V Charge current: 8A/10A Load output voltage: 12V Battery typeLead acid (GEL, AGM, flooded) Application 1. The household solar power systems 2. Small solar power system 3. The portable solar application products 1.Electronically regulated charging regime: Boost and float charge 2.Emperature compensation 3.Deep discharge protection 4.PWM series regulation, no panel short circuit 5.Fully electronically protected: panel surge voltage, Wrong polarity at panel or battery, Overload and short circuit at load 6.LED indications: Charge status, SOC, LVD, Overload/Short-Circuit Common positive allows grounding
Solar/poe charge controller + gigabit poe injector Model : bc-4024-g56d 1. Input : 1.1 input voltage: poe : 36vdc ~ 57vdc Solar : 30v ~ 45v Battery : 24v 2. Output : 2.1 output voltage & current: Output : 56v poe(front) / 24v load(rear) Max. Current : 0.63a poe(front) / 10a load(rear) 3. Charger : 3.1 poe charge current : 0.85a (max) For load first, only the balance used to charging. Only work with battery connected. 3.2 poe input watts : 30w(min) 3.3 poe input compliant to 802.3at, all 4 pairs available, giga. 3.4 solar charge current : 40a(max) 28.4, 0.3v vin.
Specially design for solar-public electricity system, which is in exchange of the solar system, it has power switch where there is a shock by the battery or utility grid, and also the utility grid supply charging module. Its energy saving, and also ensures the power supply. It also has the same function of eprc. Specifications: 12v, 12/24v, 5a, 10a, 15a Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation. Industry level production standard, led indication on system condition. The controller pcb is pained with england apl lacquer, its highly moisture-proof Packing:1pc/color box, 50pcs/carton, carton size:51&31&21cm.Gw:13.5kgs, nw:12.5kgs
Charge modepwm System voltage12V/24V Charge current: 10A/20A Output voltage: 12Vor 24V Battery typelead acid (GEL, AGM, Flooded) Application 1.Street light 2.Advertising lights (1)adopt advanced mcu design, conforming pwm charging controlling technology with strong reliability and anti-disturb capability. (2)adopt solar energy as power source without waste of regular energy. (3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage. (4)with perfect capability, to protect acid battery from over discharge (5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on (6)work under diferent surroundings. (7)memory function: startup load mode and main circuit�??s working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
Charge mode, pwm System voltage, 12v/24v Charge current: 10a/20a Output voltage: 12v or 24v Battery type, lead acid (gel, agm, flooded) Application , 1.Street light 2.Advertising lights (1)adopt advanced mcu design, conforming pwm charging controlling technology, with strong reliability and anti-disturb capability. (2)adopt solar energy as power source without waste of regular energy. (3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage. (4)with perfect capability, to protect acid battery from over discharge (5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on (6)work under diferent surroundings. (7)memory function: startup load mode and main circuits working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
Pwm charging Direct, boost and float auto-charging modes. Optimized control for intelligent adjustment of control parameters based on actual charging / discharging rates. Led indication of system working status. Temperature compensation, high precision digital temperature transducer. Over-load and short circuit protections. Rated charging current: 20a, 30a, 40a System voltage: 12v, 12/24v, 48a As the same above
The controller is designed for solar dc lighting system. There are several optional working modes, and has two output modes. Dc output modes and two time setting modes. Specifications: 12v, 12/24v, 5a, 10a, 15a Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation. Industry level production standard, led indication on system condition. The controller pcb is pained with england apl lacquer, its highly moisture-proof
PLCs have the central control role in various fields, including manufacturing and public systems, and in service fields. They can be used to construct optimal small and large-scale systems.
