Product introduction:
The high-power solar charging controller adopts industrial-grade product reliability design and has superior stability.
LCD display, real-time display of all operating parameters, and can set adjustments.
Using MCC microcontroller control, automatic temperature compensation, three-phase PWM charging: constant current - constant pressure - float charge.
Comprehensive electronic protection function, effective control of reverse connection, short circuit, overload.
 Four load operating modes: manual, light control + time control, pure light control, real-time control.
This controller is mainly used to protect the battery, to avoid overcharging the battery by the solar energy and overdischarging due to load operation. The charging voltage can be automatically adjusted according to the temperature change.
The 24V/48V solar system controller automatically recognizes three solar systems of 12V/24V/48V.
All products are treated with moisture-proof, metal body, superior heat dissipation, and are still suitable for use in harsh outdoor environments.
Widely used in large off-grid power generation systems, outdoor base stations, home power generation, outdoor power generation and so on.
Shenzhen Olys Technology 12 years focused on the development and manufacture of solar controller, master the core of solar energy controller, cutting-edge technology, service more than 300 new energy companies.
-
1. Increase the charging current, compared to the traditional PWM controller, MPPT charging efficiency can be increased by 10-30%. (Controller conversion efficiency> 95%)
2 can be selected by DIP switch 4 batteries. GEL battery, lead-acid (liquid) battery, AGM2 battery, LiFePO4 lithium iron phosphate battery
3. With load output, with over discharge, overload, short circuit protection.
4. With Bluetooth function, you can view the controller parameters through the phone APP display (MPPT5020-BT models only)
5. Automatic unattended charging. With overload, overheating, reverse current protection (cloudy or no sunlight at night, to prevent the battery back to the solar panel)
6. Overcharge protection. When the battery is full, the charging current will be reduced, when the battery is dead, it will immediately charge the battery
7. Automatic temperature compensation. Ensure the battery in the low temperature or high temperature environment, the use of charging parameters to extend battery life
It is strongly recommended not to install the battery and controller in place of heat source, so as to avoid controller's misoperation.
Shenzhen OLYS Technology 12 years focused on the development and manufacture of solar controller, master the core of solar energy, service more than 300 new energy companies.
-
Product introduction:
1, MPPT lithium battery solar street light controller automatically adapts to 12V and 24V systems.
2, built-in boost type constant current source, the efficiency can reach above 95%.
3, with 4 working modes, working time and LED lamp brightness can be adjusted.
4, with infrared remote control function, all parameters can be set using a remote control key. Can also be used to set the button, directly 5, displayed on the digital tube.
6. The integrated street light controller has a smart power-down function to extend the working hours of the LED lights.
7. High-efficiency PWM charging technology is adopted to ensure that the battery is working in the best condition, which greatly prolongs the service life of the battery and has high-accuracy temperature compensation.
9, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse protection.
10, full plastic, metal body, waterproof and drop, to deal with various harsh environments.
Product introduction:
1, solar street light controller can automatically adapt to 12V and 24V systems.
2. It has a dual-period control function (lit at night and before dawn) to meet the individual needs of customers for street lamps.
3. There are three kinds of load power supply modes: pure light control, light control on + delay off (single time), light control on + delay off - delay on + light control off (double time).
4. The dual-period solar street light controller adopts intelligent machine design. All work processes are controlled by software and can achieve high precision and high reliability.
5, using high-efficiency PWM charging technology, with high-precision temperature compensation.
6. The digital tube displays the operating parameters of the LED lamp.
7, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse and other full electronic protection.
8, the whole machine adopts full potting process, waterproof rating IP68.
Product description:
1. Solar portable lighting, 3W solar panels.
2. solar panel charging and mobile phone charger charging.
3. Built-in 2000mAH Lithium Battery.
4. Work time 4 hours
(5) can be used in various fields.
6. Intelligent lighting, a variety of advantages.
-
Model: mppt5012a-duo (12a) , mppt5025a-duo (25a)
Solar charging controllers for camper
Charge modemppt
System voltage12v
Battery numbertwo battery charging ports
Battery typegel, lead-acid, agm2, lifepo4
Application
1.For camper, caravan
2.Self-contained solar systems
3.For boat
1. Increased mpp charging current compared with conventional controllers, due to ultramodern controller technology (microprocessor)by 10 % to 30 % (efficiency > 95 %)
2. Switchable characteristic lines of charging for optimum charging of gel/dry fit/agm/fleece or acid/lead-acid, as well aslifepo4 batteri es .
3. Two battery charging ports: automatic charging of the main battery or board battery (board i):
Support charging and trickle charging (max.1 a) of the vehicle's starter battery (start ii) with overcharge protection
4. Unattended charging: standard protection against overload, overheating, reverse battery and back discharge of the battery(in case of insufficient solar power, such as at twilight, at night etc.).
5. Overcharge protection: reduction of the charging current of the battery in case of excessive solar power and full battery. Immediate recharging in case of power consumption to ensure always the best possible charging state of the battery.
6. Connection for temperature sensor , automatic adaptation of the charging voltage to the battery temperature. Incase
Of low outside temperatures, full charging of the weaker battery is improved, and in case of summery temperature sun necessary battery gassing will be avoided.
This is highly recommended, if the battery is exposed to strong variations in temperature, such as in the motor compartment.
-
Solar lighting kits portable
Solar panel: 10W
Battery capacity: 48WH, 4AH/12V
LED lamp: 3W *2pcs
Function: Lamp+USB charge+Solar charge
Application
1.for rural households and adventure enthusiasts
2. Lack of electricity
1.This generator designed to provide DC power supply for power lighting, mobile phone charging, run the
DC Fan and Radio, etc.
2.Adopt the latest PWM control modulation, real time display of battery capacity and load status.
3.The solar kits built-in maintenance-free Lead-acid battery.
4.With several output socket, can output voltage DC12V and DC5V at the same time.
5.It can charged by solar panel.
6.Voice warning and together LED indicator shows the battery get low.
Functions
1.The solar power system designed to provide DC power and AC power ,supply for lighting, mobile phone charging, run the DC Fan and Radio, and TV ,computer etc.
2.Built-in PWM charge controller, real time display of battery capacity and load status.
3.Built-in maintenance-free Lead-acid battery.
4.With several output socket, can output voltage DC12V and USB DC5V at the same time.
5.The solar kits built-in DC to AC power inverter, can output AC220V/50HZ ,
6.Voice warning and together LED indicator shows the battery get low.
-
Product description:
Lead-acid, lithium universal charge controller automatically adapt to 12v / 24v system
Three batteries optional. Lead-acid, colloidal, lithium iron phosphate batteries. Select by dip switch
Using pwm three-phase charging technology
Usb port charging controller with 2 usb ports, output voltage usb 5.0v / 2100ma
Full electronic protection
Remote controller charger
Charge modePWM
System voltage12V/24V
Charge current: 10A/20A
Output voltage: 12V or 24V
Battery typeLead acid (GEL, AGM, flooded)
Application
1.Street light
2.Advertising lights
-
Charge mode, pwm
System voltage, 12v/24v
Charge current: 10a/20a
Output voltage: 12v or 24v
Battery type, lead acid (gel, agm, flooded)
Application ,
1.Street light
2.Advertising lights
(1)adopt advanced mcu design, conforming pwm charging controlling technology, with strong reliability and anti-disturb capability.
(2)adopt solar energy as power source without waste of regular energy.
(3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage.
(4)with perfect capability, to protect acid battery from over discharge
(5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on
(6)work under diferent surroundings.
(7)memory function: startup load mode and main circuits working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
Charge modepwm
System voltage12V/24V
Charge current: 10A/20A
Output voltage: 12Vor 24V
Battery typelead acid (GEL, AGM, Flooded)
Application
1.Street light
2.Advertising lights
(1)adopt advanced mcu design, conforming pwm charging controlling technology with strong reliability and anti-disturb capability.
(2)adopt solar energy as power source without waste of regular energy.
(3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage.
(4)with perfect capability, to protect acid battery from over discharge
(5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on
(6)work under diferent surroundings.
(7)memory fu nction: startup load mode and main circuit�??s working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
Mini controller
Charge mode, pwm
System voltage, 12v
Charge current: 8a/10a
Load output voltage: 12v
Battery type, lead acid (gel, agm, flooded)
Mini controller
Charge mode, pwm
System voltage, 12v
Charge current: 8a/10a
Load output voltage: 12v
Battery type, lead acid (gel, agm, flooded)
Application ,
1. The household solar power systems
2. Small solar power system
3. The portable solar application products
1.Electronically regulated charging regime: boost and float charge
2.Emperature compensation
3.Deep discharge protection
4.Pwm series regulation, no panel short circuit
5.Fully electronically protected: panel surge voltage, wrong polarity at panel or battery,
Overload and short circuit at load
6.Led indications: charge status, soc, lvd, overload/short-circuit common positive allows
Grounding
The sc solar charge controller series is especially designed for small solar systems with the
Need of a low battery disconnect feature.Main differences to the preceding sc series: the
Regulation circuit provides now series regulation to prevent single cell overheat problems of
Shorcircuited solar panels. The terminal section has been replaced by a rugged, well profane
4mm2 terminal block. The melting fuse of the predecessor has been replaced by a fully
Electronically protected circuit.
2 leds and 1 duo led to display charging in progress, battery soc, load disconnect and overload
Status. Leisure and rural electrification systems are the typical applications for this product. It is a
Perfect solution for cost-sensitive systems which require state-of- the-art system management.
Product introduction:
12V/24V universal solar controller adopts industrial-grade product reliability design with super stability. Three 2, LED light status display, can clearly understand the system operating status
3, using MCC microcontroller control, PWM regulation, automatic temperature compensation, three-phase charging mode: constant current charge - constant pressure charge - float charge
4, comprehensive electronic protection function, effective control of reverse connection, short circuit, overload
5, solar energy system controller is mainly used to protect the battery, to avoid overcharging the solar energy to the battery and due to overload of the load 6, operation, can automatically adjust the charging voltage according to the temperature changes
7, this series of products automatically identify 12V/24V system
8, all products are treated with moisture, in the harsh outdoor environment is still applicable.
Shenzhen Olys Technology 12 years focused on the development and manufacture of solar controller, master the core of solar energy cont roller, cutting-edge technology, service more than 300 new energy companies.
