Charge modeïPWM
System voltageï12V
Charge current: 8A/10A
Load output voltage: 12V
Battery typeLead acid (GEL, AGM, flooded)
Application
1. The household solar power systems
2. Small solar power system
3. The portable solar application products
1.Electronically regulated charging regime: Boost and float charge
2.Emperature compensation
3.Deep discharge protection
4.PWM series regulation, no panel short circuit
5.Fully electronically protected: panel surge voltage, Wrong polarity at panel or battery,
Overload and short circuit at load
6.LED indications: Charge status, SOC, LVD, Overload/Short-Circuit Common positive allows
grounding
Solar/poe charge controller + gigabit poe injector Model : bc-4024-g56d 1. Input : 1.1 input voltage: poe : 36vdc ~ 57vdc Solar : 30v ~ 45v Battery : 24v 2. Output : 2.1 output voltage & current: Output : 56v poe(front) / 24v load(rear) Max. Current : 0.63a poe(front) / 10a load(rear) 3. Charger : 3.1 poe charge current : 0.85a (max) For load first, only the balance used to charging. Only work with battery connected. 3.2 poe input watts : 30w(min) 3.3 poe input compliant to 802.3at, all 4 pairs available, giga. 3.4 solar charge current : 40a(max) 28.4, 0.3v vin.
Specially design for solar-public electricity system, which is in exchange of the solar system, it has power switch where there is a shock by the battery or utility grid, and also the utility grid supply charging module. Its energy saving, and also ensures the power supply. It also has the same function of eprc. Specifications: 12v, 12/24v, 5a, 10a, 15a Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation. Industry level production standard, led indication on system condition. The controller pcb is pained with england apl lacquer, its highly moisture-proof Packing:1pc/color box, 50pcs/carton, carton size:51&31&21cm.Gw:13.5kgs, nw:12.5kgs
Charge modepwm System voltage12V/24V Charge current: 10A/20A Output voltage: 12Vor 24V Battery typelead acid (GEL, AGM, Flooded) Application 1.Street light 2.Advertising lights (1)adopt advanced mcu design, conforming pwm charging controlling technology with strong reliability and anti-disturb capability. (2)adopt solar energy as power source without waste of regular energy. (3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage. (4)with perfect capability, to protect acid battery from over discharge (5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on (6)work under diferent surroundings. (7)memory function: startup load mode and main circuit�??s working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
Charge mode, pwm System voltage, 12v/24v Charge current: 10a/20a Output voltage: 12v or 24v Battery type, lead acid (gel, agm, flooded) Application , 1.Street light 2.Advertising lights (1)adopt advanced mcu design, conforming pwm charging controlling technology, with strong reliability and anti-disturb capability. (2)adopt solar energy as power source without waste of regular energy. (3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage. (4)with perfect capability, to protect acid battery from over discharge (5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on (6)work under diferent surroundings. (7)memory function: startup load mode and main circuits working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
Supplier: Air dryer, control valves , heat exchanger, instruments and controls
Services: Sourcing industrial goods from india
Pwm charging Direct, boost and float auto-charging modes. Optimized control for intelligent adjustment of control parameters based on actual charging / discharging rates. Led indication of system working status. Temperature compensation, high precision digital temperature transducer. Over-load and short circuit protections. Rated charging current: 20a, 30a, 40a System voltage: 12v, 12/24v, 48a As the same above
The controller is designed for solar dc lighting system. There are several optional working modes, and has two output modes. Dc output modes and two time setting modes. Specifications: 12v, 12/24v, 5a, 10a, 15a Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation. Industry level production standard, led indication on system condition. The controller pcb is pained with england apl lacquer, its highly moisture-proof
AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply Product Introductionï¼? SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger. Unique function High efficiency over the full load range, full load efficiency greater than 95% Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main featuresï¼? Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs. Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. RS485 interface (Optional)
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".