It is mainly used for bridge building outer surface with higher weather resistance requirements,
Each group is divided into two components at the proportion of 20:4, weighing 24kg. It is mainly used for bridge building outer surface with higher weather resistance requirements, featuring excellent color retention, thinning after adding water, environmental friendly, no harm.
Supplier: Powder coating, fluorocarbon coating, waterborne coating
Waterborne Acrylic Modified Saturated Polyester Resin Can be cured at between 120 150. Even higher temperature, it has good yellowing resistance. It is suitable for coil coating and can coating. It has very good results for dipping primer applications. It is also for clear gloss protective coating. Performance Advantages: Low odor LOW VOC Non yellowing, even at high temperature curing Good hardness development Applications: All kinds of baking systems Metal primer and topcoats Industrial applications Spray, roller, brush or dipping can be used. 1, Product Composition: Waterborne Acrylic Modified Saturated Polyester Resin, Cosolvent 2, Typical Data: Type of polymer Waterborne acrylic modified saturated polyester resin Non-volatile(%) 70±2 Viscosity( 25, mpa*s) 30-70* PH ---- Neutral.agent Non neutralization OH value on solids (mgKOH/g) 105 Air dry Inapplicable Cross-Linking with amino resin Applicable Grinding Applicable Drying speed better Corrosion resistance better weatherability better PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether 3, Product Properties: Good hardness (>4H), high gloss; Good flexibility; Good solvent resistance; Low temperature fast cross-linking (110. 20minutes); Excellent shear stability, can be grinded with dispersions directly. 4, Instructions: WL-182 can be diluted with water after neutralization by N,N-dimethyl ethanolamine the amount of which is about 4-5%of WL-182.It has tocombine waterborne amino resin to make baking coating. The suggested amount is about 20-30% of WL-182 by weight. The baking temperatureis above 120. The baking conditions and film properties are related with the amino resins used. Right amount of waterborne acidic catalysts canbe added when using methyl etherified amino resin(recommended adding amount is 0.5-1% of WL-182), which can accelerate solidifying. PH value of the coating system can always be adjusted with organic amine or ammonia. Viscosity of the dispersion will increase as the PH valueincreases. The resin can help to wet pigments, so wetting agent may reduce. 5, Storage: It is suggested that the product should be stored in a cool and dry weak alkaline place. The quality guarantee period is 6 months, and the expiredproducts can still be used after passing the inspections. 6, Applications: Amino-baking top coatings. 7, Note: The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
Waterborne Acrylic Modified Saturated Polyester Resin Can be cured at between 120150. Even higher temperature, it has good yellowing resistance. It is suitable for coil coating and can coating. It has very good results for dipping primer applications. It is also for clear gloss protective coating. Performance Advantages: Low odor LOW VOC Non yellowing, even at high temperature curing Good hardness development Applications: All kinds of baking systems Metal primer and topcoats Industrial applications Spray, roller, brush or dipping can be used. 1, Product Composition: Waterborne Acrylic Modified Saturated Polyester Resin, Cosolvent 2, Typical Data: Type of polymer Waterborne acrylic modified saturated polyester resin Non-volatile(%) 70±2 Viscosity( 25, mpa*s) 30-70* PH ---- Neutral.agent Non neutralization OH value on solids (mgKOH/g) 105 Air dry Inapplicable Cross-Linking with amino resin Applicable Grinding Applicable Drying speed better Corrosion resistance better weatherability better PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether 3, Product Properties: Good hardness (>4H), high gloss; Good flexibility; Good solvent resistance; Low temperature fast cross-linking (110 20minutes); Excellent shear stability, can be grinded with dispersions directly. 4, Instructions: WL-182 can be diluted with water after neutralization by N,N-dimethyl ethanolamine the amount of which is about 4-5%of WL-182.It has tocombine waterborne amino resin to make baking coating. The suggested amount is about 20-30% of WL-182 by weight. The baking temperatureis above 120â??. The baking conditions and film properties are related with the amino resins used. Right amount of waterborne acidic catalysts canbe added when using methyl etherified amino resin(recommended adding amount is 0.5-1% of WL-182), which can accelerate solidifying. PH value of the coating system can always be adjusted with organic amine or ammonia. Viscosity of the dispersion will increase as the PH valueincreases. The resin can help to wet pigments, so wetting agent may reduce. 5, Storage: It is suggested that the product should be stored in a cool and dry weak alkaline place. The quality guarantee period is 6 months, and the expiredproducts can still be used after passing the inspections. 6, Applications: Amino-baking top coatings. 7, Note: The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
Formula : Fe2O3·H2O CAS No.: 51274-00-1 EINECS No.: 257-098-5 H.S. Code: 2821100000 Product Appearance: Yellow powder Packing: Packed in 25kg plastic bags or We can accommodate virtually any special packaging needs Storages: Sealed storage in a cool, dry and well ventilated warehouse Application: 1. Iron oxide yellow pigment is suitable for use in various types of concrete prefabricated parts and building products as pigments or colorants, directly transferred into cement applications. Various indoor and outdoor colored concrete surfaces, such as walls, floors, ceilings, pillars, porches, pavements, parking lots, stairs, stations, etc.; such as tiles, floor tiles, roof tiles, panels, terrazzo, mosaic tiles, artificial marble Wait. 2, iron oxide yellow pigment is suitable for various paint coloring and protective substances, including waterborne interior and exterior wall coatings, powder coatings, etc.; also applicable to oily paints including epoxy, alkyd, amino and other primers, putty and topcoat It can also be used in toy lacquer, decorative lacquer, furniture lacquer, electrophoretic lacquer and enamel (Note: not suitable for high temperature products over 170 °C). 3, iron oxide yellow pigment is suitable for the coloring of plastic products and rubber products, such as car inner tube, aircraft inner tube, bicycle inner tube and so on. 4. In addition, iron oxide yellow pigment can also be used for coloring paper and leather.
