Marble desgins uv board, the designs same as the real marble, with the lighter weight, lower cost, easy to install
Epdm pre-insulated stainless steel corrugated hose is made of durable stainless steel 304 /316 l flexible tube, with epdm insulation pipe, brass fitting, strong pe jacketing , flexible and easy to installation, it provides the maximum performance for all your solar thermal system.
Specification:
1. Each coil includes both the feed and return pipes.
2. A flexible high-grade stainless steel tube 316l(or 304).Maximum pressure dn 16 /17.5 bar; dn 20/17.5 bar, dn25 17.5 bar rated burst pressure 200 bar
3. 100% genuine epdm insulation pipe. Light, flexible, closed cell, synthetic caoutchouc; free of pvc and non- cfc.Very good ozone resistance, uv-resistant. Work temperature range from -200 degrees to 150 degrees, max to 175 degrees
Non-barrier pex pipe is produced with crosslinked polyethylene. Crosslinking is obtained through a chemical process that increases the bonds between macromolecules to form a more complex stricture than the normal polyethylene. Due to the crosslinking, the polyethylene's performance is greatly enhanced still maintain the excellent properities of thermoplastics
Oxygen-barrier pex pipe with evoh is made up of 5 layers: pex, adhesive, evoh, adhesive, pex. The layers of adhesive bind the two layers of pex-b to the central barrier layer of evoh by a thermal reaction. The evoh barrier layer is right in the center, preventing the pipe from being damaged by scratch and from reducing its performance due to moisture.
Pe(x, rt)-al-pe(x, rt) pipe are a kind of five-layers' pipe that combines the advantages of a metal and plastic pipes and eliminates the disadvantages of both materials at the same time.The aluminum core in middle layer is absolutely diffusion tight, which can reliably prevents oxygen/gases from permeating into the pipe. The pe(x, rt)-al-pe(x, rt) pipes can compensate and reduce snap-back forces and heat-expansion with changes of
Pvc laminated ceiling/wall
Width:18cm-60cm; thickness: 4.5mm-15mm
Length: 2.95m or 5.95m or according to customer requirement
Surface treatment: glossy printing, hot stamp, laminated
Features:lightweight, easy to transport, durable;highly resistant to moisture and mold; easy to maintenance, quick and easy to install; waterproof, fire resistance; vivid range of colors and designs
Application:can be used in offices, lobbies, super markets, malls, modern class rooms, auditoriums, libraries, hospitals, clinics, multiplexes, gaming zones, cinema halls, studios, art galleries, exhibition centers, marriage places, clubs, gyms, beauty parlors, salons, fitness studios, yoga centers, book stores , home decoration , rest rooms , washrooms.
Laminated: can be achieved on the surface, especially the wooden designs, make it more application in different places
Compact heat pipe solar water heater
Tech data:
1. Inner water tank:stainless steel, sus304-2b, ss316l, enamel;thickness, 1.2-2.5mm.
2. Outer water tank:color steel or stainless steel;thickness, 0.40mm.
3. Insulation layer: polyurethane foam;thickness, 30-60mm.
4. Frame:galvanized steel; aluminum alloy; stainless steel; angle, as your requirement.
5. Vacuum tubes: aln/ain-ss/cu layer; 47-1500 or 58-1800 with heat pipe.
6. Heating element, mg rod, reflector and controller can be provided.
7. Working pressure :0.6mpa , testing pressure :1.0mpa.
Characteristic:
1. Evacuated tube, aluminum fin and heat pipe arc closely integrated, realizing faster heat transfer and lower loss.
2. There is no water in tube, no filthy, anti-freeze, unlimited time of putting water and pressure operation, even there is tube broken, and the whole system still can work.
3. The system is same as tap water which would make the bathing very comfortable.
4. With the t/p valve, air vent valve makes the system work very stable and safety.
5. Can be used all year round in the cold climate
Separated pressure solar water heater
This system is combined with solar collector, pressurized storage tank, work station, pipeline etc.
1. Solar collector can be the heat pipe solar collector, the u pipe solar collector, the balcony solar collector or the flat solar collector.
2. Inner tank for pressurized storage tank can be sus304-2b, ss316l or enamel tank.
3. Solar working station.
4. Working pressure :0.6mpa , testing pressure :1.0mpa
Characteristic:
1. No disorder water tank on your roof: split solar water heating systems is using a high efficiency solar collector on your roof and a high pressurized storage tank in the house. Integrated in to the roof of the building perfectly.
2. Perfect solar collector for domestic hot water heating system can be combined with existing energy source, such as your gas water heater, electric water heater, boiler, etc.
3. There is an auxiliary heating device--electric heater booster in the tank, so providing hot water in case of cloudy or rainy days, you will no need to worry about it.
4. Completely automatic
Compact non-pressure solar water heater
Tech data:
1. Inner water tank:stainless steel, sus304-2b, ss316l; thickness, 0.31-0.51mm.
2. Outer water tank:color steel or stainless steel;thickness, 0.40mm.
3. Insulation layer:polyurethane foam;thickness, 30-60mm.
4. Frame:galvanized steel; aluminum alloy; stainless steel; angle, as your requirement.
5. Vacuum tubes:aln/ain-ss/cu layer;47-1500 or 58-1800.
6. Tank capacity:70-400l.
7. Assistant tank heating element, mg rod, reflector and controller can be provided.
Characteristic:
1. Operated completely automatic if connect with intelligent controller.
2. Installed both on flat and inclined roof, and can be used with a electric booster (heating element) as to provide hot water without sunshine.
4. Suitable for camping area, holiday residences.
5. Stable and reliable performance, well wind resistance
Heat pipe solar collector
Tech data:
1. Manifold casing materials:galvanized steel, aluminum alloy or stainless steel;sliver or black;insulation: rock wool or puf.
2. Header pipe materials:copper tu2, 1.0mm thickness and 35mm diameter.
3. Vacuum tube heat pipe:copper, tu2; 8mm dia; 1700mm len.;condenser, dia, 14mm; single or double fins.
4. Frame material: galvanized steel, aluminum alloy or stainless steel.
5. Fame angle can modified according to the customers, requirement.
6. Manifold shape and size can be modified according to the customers, requirement.
Characteristic:
The heat pipe solar collector is connected with storage tank, electric control device, hot water mix unit and fittings for circulation and installation. The selective coating on the inner cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminum fins. The liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat ex-changer and the vapor becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat transfer liquid (anti-freezing liquid or water) via a copper pipe. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.
