Top & bottom drilling spindles of GHD-H-130AL works automatically
Just one button, bottom spindle starts then top spindle after
Laser device helps glass holes registration
Drilled glass core automatically ejected & pushed to a collector bin
Drill hole centre to "C" stands up to 1000 mm
Proper speed with adequate control ensures drill holes free of burr
Core drill center water cooling
Product name: Deep hole drilling and boring machine Detailed product parameter description: Product model: Texas deep hole drilling and boring machine (T2120) Main technical specifications and performance Technical specifications parameter Working scope Maximum boring diameter 200mm Drilling diameter range N40-N80mm Maximum boring depth 1000-8000mm Working support diameter range 60-300mm Spindle Spindle center height 350mm Headstock spindle bore 75 Spindle front end taper hole 85mm1:2 Spindle speed range 61-1000r/min 12 types Feed Feed speed range (stepless) 5-1000mm/min Fast moving speed of carriage 2m/min Motor Main motor power 30kW Hydraulic pump motor power 1.5kW Power of fast motor of carriage 3kW Feed motor power 4.4kW Cooling pump motor power 5.5kW4 groups other Cooling system rated pressure 2.5MPa Cooling system flow 100 200 300 400L/min Rated working pressure of hydraulic system 6.3MPa The oiler can withstand the maximum axial force 6.3KN Maximum preload force of the oiler on the workpiece 20KN Dimensions and weight length parameter 1000 2000 3000 4000 5000 6000 7000 8000
Drill Machine
Product Name: Drilling Machine Detailed product parameter description: Product model: ZOJET Z3050*16/1 Workbench size (mm): 500*630 Maximum drilling diameter (mm): 50 Distance from spindle centerline to column generatrix (mm): Maximum 1600 Minimum 350 Distance from spindle end to base working surface (mm): Maximum 1220 Minimum 315 Spindle travel (mm): 315 Horizontal moving distance of the spindle box (mm): 1250
Drill Bits
Power Screw Bits
1- Drilling Diameters: 4~120mm 2- Thickness of processed glass: 3~20mm 3- Max. of processing glass: 2600x1800mm 4- Power: 2.3kw 5- Weight: 1.0 Tons 6- Occupation area: 2600 x 2600 x 1700mm (L x W x H) 7- With air compressor. 8- XINDONGYA motors (special made) 9- Auto and Manual : Up and down drilling can be drilling automatically.
Supplier: 304 stainless steel pipes, carbon steel pipes, galvanized steel pipes, seamless pipes, stainless steel pipes, used drill bits
Buyer: Used drill bits and drill pipes, tubing, casing
1. The Horizontal Glass Drilling Machine is suitable for drilling hole for different glass thickness and drilling different diameter hole by equipping with different drilling bits. The machine is good for batch processing. 2. Two drilling spindles, one at the lower side and another upper side. When the glass is put on the table, it is fixed pneumatically and the lower spindle will rise up automatically to drill from the bottom side while the upper bit is operated by manual. 3. The cooling water runs inside the core drill so that the cooling effect is directly acted onto the glass without any loss. Holes of different sizes can be achieved with bits of different diameters.
Top & bottom drilling spindles of GHD-H-130AL works automatically Just one button, bottom spindle starts then top spindle after Laser device helps glass holes registration Drilled glass core automatically ejected & pushed to a collector bin Drill hole centre to "C" stands up to 1000 mm Proper speed with adequate control ensures drill holes free of burr Core drill center water cooling
