(Model) Specification
ZX-13E
Drilling capacity 13 mm
Chuck size 13 mm
Table travel(mm) 290
Table size 185 x 185 mm
Spindle travel 60 mm
Distance spindle axis to column(mm) 125
Spindle taper B16
Columm diameter 60 mm
Spindle speed range(r.p.m) 540-3100
Spindle speed series 5
Motor power(HP) 1/3
Overall height 730 mm
N.G./G.W.(kg) 35/37
Packing case dimension(mm) 680*440*255
In carton or wooden case
1- Drilling Diameters: 4~120mm 2- Thickness of processed glass: 3~20mm 3- Max. of processing glass: 2600x1800mm 4- Power: 2.3kw 5- Weight: 1.0 Tons 6- Occupation area: 2600 x 2600 x 1700mm (L x W x H) 7- With air compressor. 8- XINDONGYA motors (special made) 9- Auto and Manual : Up and down drilling can be drilling automatically.
Product introduction: use, function, etc The following configuration is a product diagram + table configuration product specific parameters NAME PARAMETER Engine Model 6BTA5.9-C150 Commins6BTA5.9-C150 Engine cylinder number 6 Engine displacement 5.9L Engine power 112(kW) Engine speed 2200(r/min) Maximum pull back force 200kN Maximum thrust force 200kN Forward and backward speed of power unit 0- 143mm/0-429mm low speed 0-143mm/ high speed 0-429mm/ Maximum torque 6500Nm Spindle speed 0-140(r/min) Incident angle 10°-22° Forward speed slow speed 1.4Km/h high speed 2.35Km/h Capacity of fuel tank 245L Capacity of hydraulic tank 250L Departure angle 20° Grade ability 25° oversize of machine 5912mmX2303mmX2166mm Weight of machine with drill rods 9t Maximum pressure of mud pump 9 Mpa Maximum flow rate of mud pump 240L/min
Top & bottom drilling spindles of GHD-H-130AL works automatically Just one button, bottom spindle starts then top spindle after Laser device helps glass holes registration Drilled glass core automatically ejected & pushed to a collector bin Drill hole centre to "C" stands up to 1000 mm Proper speed with adequate control ensures drill holes free of burr Core drill center water cooling
Drill Machine
Power Screw Bits
Drill Bits
Place of Origin.....................Germany Model Number........................TU1245 Weight ....................................3.5 Grade......................................HMS Material..................................Carbon Steel,1308 PDC cutters Shape.....................................ASH
HSS M35 5% Cobalt Centre Drill Bits
HSS M35 5% Cobalt Step Drill Bits Set, Amber FINISHED, 3PCS:4-12, 4-20-4-32MM
