STANDARD:ASTM B230, B231, B232, B398, B399, B400
VOLTAGE:5kV, 15kV TP (For Treed Areas), 15kV (For Non-Treed Areas), 25kV, 35kV, 46kV
CAPACITY:5000km/week
Covering prevents faults due to contact
Proprietary, high density outer layer resists abrasion and electrical tracking
High impulse strength allows for close spacing of phase conductors
Installed the same as bare conductors, however, covering is effective in preventing direct shorts and instantaneo
AAC (1350-H19), AAAC or ACSR conductors, concentrically stranded. Available with black or gray track resistant, high-density polyethylene (HD) or black track-resistant crosslinked polyethylene (XLP) covering. Covered conductors consist of stranded hard drawn aluminum conductors with either one, two or three extruded layers depending on the voltage rating.
In a Covered Aerial MV System (formerly called Spacer Cable), spacers hold three MV phase conductors in close approximation. The spacers are suspended from a high-strength messenger wire. Covered Aerial MV (CAMV) cable itself is a single aluminum conductor protected by a layer of track-resistant polyethylene.
With high efficiency and high power factor, Fuji Electric's Medium-voltage Variable Speed Drives contribute significantly to cost reduction and energy conservation. Fuji's Medium-voltage Variable Speed Drives products are applicable in a wide range of fields from plants to general industry and feature superior ease of maintenance.
Supplier: Lv power cables, copper control cables/railway signaling cables, ehv power cable, power cables, lv & mv arial bunched cables, flexible multi core cables, solar cables, medium voltage covered conductor, ev charging cables, aac/aaac/acsr/aaacsr/al59/bare copper & overhead conductors
Services: Manufacturer and export
Application Use for control and connecting cable on data transmission within building management system, speaker audio system and control measurement. Suitable for use in dry and damp environment. Cable Structure & Features Conductor Material : Tinned copper stranded Insulation : Semi-Rigid PVC Drain Wire : Tinned copper stranded Shielding : Aluminium foil laminated screen Outer Sheath ; PVC Sheath Colour : black or gray Technical Data Standard : UL Style 2464 Approvals : UL apporoved Rated Voltage : 300V Testing Voltage : 1500V Flame Retardant : VW-1 Insulation Resistance : Min 20Mx km Min. Bending Radius : 10 x cable diameter Operating Temp. : -30C / +80C
Medium Low Voltage Copper Conductor XLPE PVC Insulated Cable TECHNICAL DATA Rated voltage: 300V Rated temperature:-40 C~+80 C Conductor: Tinned or bare, strand or solid copper Insulator: PVC OD Tolerance: ±0.05mm Colour: white, blue, red, black, brown, orange, purple, gray, yellow, green, transparent, yellow-green, etc CHARACTERISTIC Flexible, easy assemble, cold resistance, stable performance, UL 758, RoHs compliance. APPLICATION Apply to household appliance, illumination & lighting & headlamp, electric machines, temperature sensor, metallurgy chemical series, motor cars & ships, electrical installation.
6-35kv medium vollage power cable selection with cross-linked polyethylene insulation and plastic Sheath material, insulation layer USES the three co-extrusion technology, full automatic Change control. Such products, aging resistance, corrosion resistance, environmental stress not only electricity Gas properties and good mechanical properties, and has a simple structure and outer diameter Small, light weight, easy to use and elaborate divide not restricted, Public places such as crowed, place closed space.
POWER CABLES BARE CONDUCTORS AAC, AAAC, ACSR, ACCC, ACKP, AsKP, GW, GSW, TK Please contact us for for details catalogue
MV power cable are rated up to 18/30 (36) kV and manly used in MV distribution network. The conductors are copper or aluminium , mostly compacted stranded to shape round insulated core. Their size range from 25 up to 630 sq mm per core and 3 insulated corer are laid up to assembly a cable. Any cable prtections may be applied , including construction and material for direct burial , longitudinal and /or water tightness, anti termite and fire safety.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Medium voltage power cable. Voltage 1.8/3.6 up to 26/35KV XLPE power cable has high electric strength, mechanical strength, high-ageing resisting, environmetal stress resisting antichemical corrossion, and it is simple construction, using convenient and higher operating of long term temperature. It can be laid with no drop restriction. Various of flame-retardant and non-flame retardant XLPE cable can be manufactured with three technology(peroxide, silane and irradiation crosslinking). The flame-retardant cable covers all kinds of low-smoke low-halogen low-smoke halogen free, and non-smoke nonhalogented and three classes of A, B, C. Our XLPE power cable can be manufactured according to IEC 60502, IEC 60332, and IEC 60754. Some of indexes are superior to above international standard IEC. Some of special XLPE power cable can be manufactured according to the other standards required by customs. XLPE power cable having higher long-term working temperature and greater current rating, at the same environment XLPE cable may be reduced size(nominal cross-section)1or 2 class in comparison with paper and PVC cable. This is not only improve the quality and properties of products, but also reduce cables production costs.
