LC 202 is a water based general purpose cleaner to
penetrate, emulsify and disperse oil, grease, dirt and grime
and other types of soils from a variety of hard surfaces.
Ideal for cleaning walls, floors, desks, light fixtures,
automobiles, painted woodwork. Also can be used on metal
surfaces such as stainless steel, aluminum, cooper and
brass.
Application
Spray, mop, brush wipe, dip method are recommended. Use for cleaning
walls, floors, desks, light fixtures, automobile, painted wood work.
Dosage
Dilute with ratio of 1 : 15 (min) up to 1 : 200 with water depending on the dirt
thickness & type of the surfaces
Handling & Precaution
Avoid spills on eyes. Should avoid unnecessary contact with skin. Can
irritate when exposed for a longer period. Harmful if swallowed.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
For clean the computer and others
Prevent clogging caught in and pipelines on metal
For protects and make furniture looks clean
LifeChem KB 222 is a specialty formulated hand soap which is pH
balanced for all skin types. This hand soap not only cleans but
special moisturizing additive add freshness & leaves a smooth
feel.
LifeChem KB 222 do not produce a slippery feeling unlike most other
hand soaps and do not require excessive flushing to remove the
slippery feel.
Presented in a fresh fragrance without reducing the quality of the
product. Concentrated product suitable for use in public toilets
after dilution.
Application:
1. Pour one drop on the palm of your hand
2. Put water and rub both the hands to produce a gentle lather
3. Wash and flush with clean
Dosage:
Can be used undiluted directly. Can also be used by diluting with clean
water up to a ratio of 1:5 ( 1 part of LifeChem Hand Soap dilute with 5 parts of
clean water )
Handling & Precaution:
Do not get contact with eyes. Harmful if swallowed.
Packaging:
Available in cup 165 gr.. Can also be custom packaged
KB 207 is a water based, environment safe,
food-grade general purpose cleaner to
penetrate, emulsify and disperse oil, grease,
dirt and grime. Ideal for cleaning walls, floors,
desks, light fixtures, automobiles, painted
woodwork.
Can also be used safely on metal surfaces
such as stainless steel, aluminum, copper and
brass
Application:
Spray, mop, brush wipe, dip method are recommended. Use for mopping,
floors & walls by diluting with water as required depending on surface
condition.
Dosage:
Dilute with water depending on the cleaning work. Can be diluted up to 500
times
Handling & Precaution:
Avoid spills on eyes. Should avoid prolonged contact with skin. May irritate
when exposed for a longer period on certain sensitive skin. Harmful if
swallowed.
Packaging:
Available in pail of 20 lt.. Can also be custom packaged
KB 210 is specially formulated for use in dishwashing
machines. It is food-grade.
KB 210 penetrates, emulsifies and disperses oil,
grease, etc. from kitchen wares to give best results.
Ideal for use in automatic washing machine using
dispensers.
Application:
KB 210 can be directly dispensed into washing machine using
regular dispenser or may be added manually as required. Dipping
method is recommended for manual use.
Dosage:
Dilute with water depending on the cleaning work. Adjust
dispensing quantity as per volume and quantity. Use higher
concentration if result is not satisfactory
Handling & Precaution:
Avoid spills on eyes. Should avoid prolonged contact with skin.
Harmful if swallowed.
Packaging:
Available in pail of 20 lt.. Can also be custom packaged.
LC 101 is used in steam boiler systems where water is
zeolite softened or in natural waters very low in
hardness. This treatment will prevent scale formation
from residual hardness in addition to conditioning sludge.
LC 101 is a balanced blend of polymers which are mildly
alkaline scale and corrosion inhibitors in addition to
sodium sulfite for added pitting and corrosion protection.
If 20 to 30 ppm (mg/l) of sulfite cannot be maintained
with a normal dosage of LC 101, add LC 102 to hold this
recommended level.
Application:
Easily fed to the boiler as a slug dosage or by chemical proportioning pump
directly in to the boiler. It can also be injected into the feedwater tank.
Formula LC 101 contains no heavy metals.
Dosage:
Initial dosage is one (1) quart per 1,000 gallons and one (1) quart thereafter
for every 800 gallons of make-up water. Maintain 20-30 ppm (mg/l) of
orthophosphate in the boiler water.
Handling & Precaution:
Wear protective clothing and eye protection should be provided and worn. In
case of skin contact, immediately flush thoroughly with plenty of clean water.
In case of eye contact, flush with copious of amounts of water for 15 minutes
and obtain immediate medical attention.
Packaging:
Available in pail of 20 lt.. Can also be custom packaged.
LC 105 is an ideal one product boiler internal treatment. It
can control not only calcium carbonate & calcium
phosphate deposits but also calcium sulfate and barium
sulfate. Highly concentrated alkaline product. Eliminates
excessive precipitation of solids and reduces sludge
accumulation.
Application
For use with make-up water with hardness below 150 ppm and effectively
disperses iron oxides as well as calcium phosphate and clay. Injected directly
into the boiler by means of a proportioning pump. It is environmentally safe,
non-hazardous and non-corrosive.
Dosage
Initial : 2 quarts per 100 gallons or 1 : 200
Maintenance: 1 quart for every 100 gallons of make-up water or 1 : 400
Maintain 15-25 ppm (mg/l) of orthophosphate in the boiler waters with pH
between 11.0 – 12.0. Maintain Conductivity below 5000 µmho/cm. Consult
LifeChem Technical Services when Hardness is low or high.
Handling & Precaution
LC 105 is an alkaline product and should be handled with care to prevent
personal injury. Wear protective clothing and eye protection. In case of
contact with skin, immediately flush with water. In case of contact with eye,
flush with water for 15 minutes and obtain immediate medical attention. Triple
rinse used cans before reuse or disposal.
Packaging
Available in pail of 20 lt. Can also be custom packaged.
LC 230 is a strong descaler with a special blend of
acids, corrosion inhibitors, emulsifiers & dispersing
agents. It effectively removes rust, oxides of metals,
scale and soil from metal and concrete surfaces. It’s
dissolving action on rust, silica and scale is quick and
thorough. Its acid formulation dissolves lime, scale and
rust right down to the base metal or concrete with the
selective inhibitor protecting metal surfaces. Not for
materials like glazed tiles and glass.
Application
Brush or spray on surfaces. Clean surface free from excess rust, soil and
dirt. Apply LC 230. Allow to stand for 10-20 minutes, then wipe off with
water. Surface may require repainting if necessary.
Dosage
For descaling purposes, dilute one part LC 230 with up to 20-100 parts of
water depending on the thickness scales. Allow standing for several hours
and/or re-circulate using pumps. Flush with water until all the scale is
removed. Repeat if scale is still present; check pH and maintain below 1.5
during circulation for control. Use LifeChem LC 240 for neutralizing the spent
solution before disposal. Contact Field Chemist for further information.
Handling & Precaution
Irritating to eyes and skin. If contact with skin occurs, wash immediately
with plenty of water. In case of eye contact irrigate thoroughly with water for
at least 15 minutes. Seek medical advice.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Application LC 231 is a special blend of volatile acids,
corrosion inhibitors & dispersing agents. It effectively
removes scale and soil of carbonate nature from metal
and other surfaces. LC 231 is an excellent additive for
the LC 233 for the initial removal of the carbonate based
scale and effectively bring down cost by reducing the
amount of other descalers. Its acid formulation dissolves
lime scale and rust deep down with the selective inhibitors
protecting metal surfaces.
Application
Spray or brush on surfaces. Clean surface free from rust, soil and dirt. Apply
LC 231. Allow to stand for 2-5 minutes, scrub thoroughly and re-apply. Repeat
and then flush off with water. Flush with water until all scale is removed. Add
with other descaler like LC 232 & LC 233 for stubborn and difficult to remove
scales. Cannot be used alone.
Dosage
Dilute one part of LC 231 with up to 10 parts of water depending on the
thickness of scales.
Handling & Precaution
Irritating to eyes and skin. Protective clothing and eye protection should be
provided and worn. After contact with skin, wash immediately with plenty of
water. In case of eye contact irrigate thoroughly with water for at least 15
minutes. Seek medical advice.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
LC 232 is a very strong concentrated descaler, specifically
designed to remove silica based scales and other stubborn
scales. It is a special blend of volatile acids, corrosion inhibitors
& dispersing agents. It effectively removes stubborn silica scale
and soil of silicate/phosphate nature from metal and other
surfaces. LC 232 is an excellent additive for the LC 231 & LC
233 for additional effectiveness against silica based scales and
effectively bring down cost by reducing the amount of other
descalers. Its special formulation dissolves scale and rust deep
down with the selective inhibitors protecting metal surfaces.
Application
Spray or brush on surfaces. Clean surface free from rust, soil and dirt. Apply LC
232. Allow to stand for 2-5 minutes, scrub thoroughly and re-apply. Repeat and
then flush off with water. Flush with water until all scale is removed. Add with other
descaler like LC 231 & LC 233 for stubborn and difficult to remove scales. For best
results use circulation or dipping method use of passivating agent like LC 252 or
LC 253 is essential. Make test strip before use. NOT TO BE USED ON
GLASS/SILICATE BASED SURFACES.
Dosage
Dilute one part of LC 232 with up to 10 parts of water or depending on the
thickness of scales.
Handling & Precaution
Irritating to eyes and skin. Protective clothing and eye protection should be
provided and worn. After contact with skin, wash immediately with plenty of water.
In case of eye contact irrigate thoroughly with water for at least 15 minutes. Seek
medical advice.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
LC 233 is a special blend of non-volatile acids,
corrosion inhibitors, emulsifiers & dispersing
agents. Effectively removes rust, scale and soil
from metal and concrete surfaces.
Application
May be sprayed or brushed on surfaces. Clean surface free from rust, soil
and dirt. Apply LC 233. Allow to stand for 10 - 20 minutes, then wipe off with
water. Dry surface can be repainted if desired for longer protection
Dosage
For descaling of condensers, dilute one part of LC 233 with upto 10 parts of
water depending on the thickness of scales. Allow to stand for several
hours. Flush with water until all scale are removed from condensers.
Handling & Precaution
Irritating to eyes and skin. After contact with skin wash immediately with
plenty of water. In case of eye contact irrigate thoroughly with water for at
least 15 minutes. Seek medical advice.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 202 is a water based general purpose cleaner to
Penetrate, emulsify and disperse oil, grease, dirt and grime
And other types of soils from a variety of hard surfaces.
Ideal for cleaning walls, floors, desks, light fixtures,
Automobiles, painted woodwork. Also can be used on metal
Surfaces such as stainless steel, aluminum, cooper and
Brass.
Application
Spray, mop, brush wipe, dip method are recommended. Use for cleaning
Walls, floors, desks, light fixtures, automobile, painted wood work.
Dosage
Dilute with ratio of 1 : 15 (min) up to 1 : 200 with water depending on the dirt
Thickness & type of the surfaces
Handling & precaution
Avoid spills on eyes. Should avoid unnecessary contact with skin. Can
Irritate when exposed for a longer period. Harmful if swallowed.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 219 is a technical specialty cleaner designed to remove difficult deposits
& residue on glass surfaces arrising from long exposure to external weather
Conditions. The stains & marks, including dried fungus generally builds up on
Exposed glass surfaces can easily be removed using lifechem’s lc 219. It
Is a technical product & requires complete attention to the “guidelines on
Application” during it’s use. Lc 219 effectively removes the stains & deposits
Which is generally not removed by standard glass cleaners. It leaves glass
Sparkling clean, smear-free.
The anti static components repel tiny dust particles and thus reduces
Deposits efficiently. Use lifechem’s lc 203 ; glass cleaner regularly to keep
Your glass surface in a sprkling condition.
Application
1. Use undiluted or diluted product as required depending on the stains &
Deposits. A small test patch must be made to select dilution.
2. Damp a piece of clean white wiping cloth with lc 219 and squeeze out any
Extra liquid to avoid spreading & flowing during wiping.
3. Spread a this layer using the damp/wet cloth on the stained glass or mirror
Surface. Select only a small area depending on drying rate.
4. Wipe-off using a separate piece of clean, white cloth to a shining lusture. A
Soaking time may be required in some cases.
5. Use lc 203 to rinse the cleaned surface using glass-wiper in the usual
Method.
6. Leave it to dry.
7. Repeat if necessary for highly soiled stains, deposits etc.
8. Never be used on coated glass unless proved to be safe after testing.
Dosage
May be used undiluted or may be diluted to suit method of application and extent
Of contamination. Suggested dilution is 2:1 or 1:1. Use clean & softened
Water only. Un attended application may result into damage.
Handling & precaution
Avoid spill & stains of lc 219 on ceramic tiles, glass as prolonged exposure to
Lc 219 direct effect. Keep away from children.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 250 is a water displacing anti corrosion compound
Used to prevent rust on metal surfaces with unlimited
Applications in the fields of marine, automobile, aviation
Farming, etc.
Lc 250 creeps along surfaces and into cracks to
Lubricate, loosen frozen parts and displace water. The
Loosened rust can easily be removed. The displacing
Mechanism works by preferential wetting. The attraction,
Of the preventative that of water, thus displacing water.
Application
Apply lc 250 to metal surfaces either by brushing or dipping.
When dipping is used, allow excess chemical to drip prior to
Storage.
Handling & precaution
Avoid unnecessary skin contact. Prolonged contact may cause
Irritation.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Kb 236 is a special blend of mineral acids,
Corrosion inhibitors, emulsifiers & dispersing
Agents. Effectively removes rust, scale and soil
From metal and other hard surfaces.
Application
May be sprayed or brushed on surfaces. Clean surface free from
Rust, soil and dirt. Apply kb 236. Allow to stand for 5 - 15 minutes,
Then wipe off or flush with water. Dry surface can be repainted if
Desired for longer protection.
Dosage
For cleaning surfaces, dilute one part of kb 236 with up to 10
Parts of water depending on the thickness of scales, soil & dirt.
Allow to stand. Brushing may be required. Flush with water until all
Scale are removed
Handling & precaution
Acidic product. Irritating to eyes and skin. After contact with skin
Wash immediately with plenty of water. In case of eye contact
Irrigate thoroughly with water for at least 15 minutes. Seek medical
Advice
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Remove impurities in the form of carbon from the surface of the oven, cooking utensils, sewer, ventilation, and other places where carbon deposition thickness is usually attached.
Lc 106 is an ideal steam line anti corrosion treatment for
Boilers. It is a highly concentrated, alkaline product.
Eliminates corrosion in the outgoing steam lines and
Stabilizes ph in the condensate.
Application
For use with boilers which requires anti-corrosion treatment in the steam lines. It
Disperses with steam and forms a protection film on the inner surfaces of the
Steam pipes. Injected directly into the boiler by means of a proportioning pump.
It is environmentally safe. Do not use in boilers where steam
Contacts food.
Dosage
Initial : 1 quarts per 100 gallons or 1 : 400
Maintenance: 1 quart for every 200 gallons of make-up water or 1 : 800
Maintain ph of 7.5 – 8.5 in the steam line of system. Maintain sulfite of 30 – 60
Ppm along with lc 106. Maintain the conductivity less than 5000 mho/cm.
Handling & precaution
Lc 106 is an alkaline product and should be handled with care to prevent
Personal injury. Wear protective clothing and eye protection. In case of contact
With skin, immediately flush with water. In case of contact with eye, flush with
Water for 15 minutes and obtain immediate medical attention. Triple rinse used
Cans before reuse or disposal.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 121 is specially formulated for large installations and
High hardness water. It is developed for effective,
Economical cooling tower treatment at hospitals, hotels,
Large apartment houses, office buildings and other
Industrial and institutional cooling installations. Also
Recommended for a small installations with high
Hardness make-up water. It contains no phosphates,
Chromate, zinc or other chemicals that cause pollution
Problem. Helps control mineral deposits, sludge and
Surface pitting and does not stain automobiles or
Buildings.
Application
Use a reliable automatic proportioner with timer for controlled dosage.
Directly inject in to the circulating pipe upstream from the condenser. Cycles
Of concentration will vary from 5 – 20 as a probable upper limit. For higher
Limits consult our laboratory.
Dosage
Initial treatment : add 1 gallon of lc 121 per 2, 000 gallons of re-circulating
Water. Maintenance treatment : 1 gallon per 6, 000 gallons of water lost to
Bleed off.
Handling & precaution
Wear protective clothing and eye protection should be worn. In case of skin
Contact, immediately flush thoroughly with plenty of clean water. In case of
Eye contact, flush with copious of amounts of water for 15 minutes and
Obtain immediate medical attention. Refer to msds for more specific
Directions.
Packaging
Available in pail of 20 lt.. Can also be custom packaged
Lc 126 condenser water treatment does not use sodium
Chromate, zinc or other toxic chemicals in its composition. It
Eliminates the serious pollution problems usually associated
With the use of such chemicals for corrosion and scale
Control in cooling system. It protects medium size cooling
Towers against scale, sludge and corrosion. Lc 126
Contains a special anti-foulant additive to reduce
Accumulations of mud and silt in condenser tubes. Ideal for
Average towers with 75 to 500 ton capacity.
Application
Formulated for use in open re-circulating cooling water systems found in air
Conditioning and process operations. Apply manually, directly to the cooling
Tower basin.
Dosage
Initial dosage : add 1 gallon of lc 126 for every 500 gallons of system
Capacity.
Maintenance dosage : add 1 gallon of lc 126 for every 1, 000 gallons of
System water lost to bleed off from the cooling tower system
Handling & precaution
Slightly alkaline aqueous solution. Keep out of reach of children. Refer to
Material safety data sheet for more specific procedures and directions.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 141 is single product treatment designed to prevent
Scale deposits and corrosion to ferrous and non-ferrous
Surfaces in hot water heating systems and chilled closed
Loops. It passivates the surfaces and forms a barrier layer to
Inhibit corrosion. It is a synergistic combination of
Phosphonates, polymers and phosphate.
Application
Easily feed/injected directly into the system by means of a chemical by
Pass feeder.
Dosage
Initial treatment is 1 gallon per 1, 000 gallons of water in the system. There
After add lc 141 to maintain a level of 25-35 ppm (mg/l) of
Orthophosphate.
Handling & precaution
It is highly alkaline and should be handled with care to prevent personal
Injury. Protective clothing and eye protection should be provided and worn.
In case of skin contact , immediately flush thoroughly with plenty of clean
Water. In case of eye contact, flush with copious amounts of water for 15
Minutes and obtain immediate medical attention.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 143 is specially formulated for use in systems that are
Constantly exposed to air, such as vented air to pressurized
Systems providing corrosion protection even in systems that
Are not tight. It reduces maintenance costs by keeping
Exchangers, air handling units and zone valves free of
Corrosion clogs. It also reduces corrosion insulation and
System damage. Lc 143 contains boron nitrate that protects
Against oxygen and acid attack, works well in any closed
System. Recommended for any hot water boiler or recirculating
Or closed loop system.
Application
Can be added to a system either manually or with a pot feeder. If the
Treatment dosage is less that the capacity of feeder, fill up the feeder with
Tap water to prevent air on treatment. Not to be used in electric
Steam boilers.
Dosage
For chilled water circulating system : for initial or maintenance treatment,
Add 1 gallon of lc 143 for each 200 gallons of chilled water. The treatment
Level is easily tested with the drop titration nitrite test kit.
Handling & precaution
Irritant. Avoid contact with eyes. Avoid repeated or prolonged contact with
Skin. If contact occurs, flush with water. If eye contact occurs, flush with
Water for 15 minutes. Seek medical attention. Keep out of reach of
Children. Refer to material safety data sheet for more specific procedures.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 144 is formulated to prevent and reduce scale,
Rust, corrosion and sludge in generator system. It is
The most effective coolant for generator and other
High temperature systems. Lc 144 is a special blend
Of selective glycols, anti-corrosion additives and
Sludge conditioners that provide smooth running of
The systems.
Application
Lc 144 is widely used in power plants, generator system, etc... Found in
Marines, aviations, industries, automotives, industries, hospitals, etc.
Benefits
? excellent protection
? no more severe
Damages
? non-flammable
? non-polluting
? non-corrosive
? non-toxic
? completely safe to
Use
? reduces costly
Maintenance
Dosages
1. Check incoming water source for total hardness and chloride.
2. Recommended total hardness below 30 ppm and chloride below 50
Ppm.
3. Lc 144 can be diluted at a ratio of 1:1, 1:5, 1;10, 1:32 with deionised
Water (recommended).
4. Repeat application monthly or quarterly depending on application.
Flush if colour changes or becomes cloudy.
Handling & precaution
For professional use only. To be used in well ventilated environment. In
Case of contact with eyes, rinse thoroughly with water and seek medical
Advice immediately. If swallowed, take plenty of water and seek medical
Advice immediately. Avoid prolonged contact with skin. Put on gloves for
Sensitive skin. Keep out of reach of children. Additional information may
Be obtained from material safety data sheet (msds).
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 235 is designed specially for use in systems where
The use of acidic descalers are not recommended. Lc
235 may be re-circulated by means of a high volume
Pump for the removal of scale. Lc 235 can be used
Safely on to copper & brass surfaces besides being very
Effective in steel system.
Application
Lc 235 may be soaked overnight and re-circulated. When scale is present,
The tubes should first scraped out to remove as much as possible and then
Flushed out with a hose.
Dosage
Circulate a 10% solution (10 gallons of lc 235 for every 100 gallons of
Water.) for a period of four to six hours depending on the scale thickness.
Solution may be heated for effectiveness by steaming. The system should
Then be drained and inspected. If more scale remains, repeat the process.
When the cleaning process is complete, flush with clean water and place it
Back in service. For storing / stand by system use lc 253 or lc 252.
Handling & precaution
This product is alkaline and should be handled with care to prevent personal
Injury. Protective clothing, gloves and eye protection should be worn. In case
Of skin contact, immediately flush thoroughly with plenty of clean water. In
Case of eye contact, flush with copious amounts of water for 15 minutes and
Consult a physician. Refer to material safety data sheet for more specific
Procedures and directions.
Packaging
Available in pail of 20 lt..
Can also be custom packaged.
Lifting rust on surface of iron, metal, etc.
Provide a layer / coating that reject / hold water so it does not seep into the stone.
Lifechem lc 306 is a solvent based wet look coating for all types
Of hard and porous surfaces including granite, marble & sand
Stone. Lc 306 penetrates into the tiny pores of the surface
Structure and the minute crevices helped by the selected
Penetrants. The volatile solvents evaporates to leave an inert,
Transparent residue that makes the wet look. The surface is
Shining and polish-able, washable and ready after at least 48
Hours. Lc 306 is comprised of volatile hc solvents, penetrants
And levelling agents designed to provide excellent penetration
And wet look. Lc 306 is ideal for providing and inert coat on
Porous materials like granite, marbles, tiles and such surfaces
Including walls, floors, desks, fixtures, woodwork and even
Paper & paper based products.
Application
Applied by spray, mop, brush wipe, dip after mixing the catalyst in proper
Proportional. Leave a thick coating and let it dry for at least 48 hours. Re-apply
For thicker coat. Available for coating floors, walls, desks, fixtures, wood work.
Special use for granite, marble and porous tiled surfaces of various colours and
Types. If there is excess localised deposition, then re-apply to remove and even
The surface. Apply uniformly to avoid accumulation.
Handling & precaution
Avoid spills on eyes. Should avoid unnecessary contact with skin. Can irritate
When exposed for a longer period. Harmful is swallowed. Do not inhale the
Vapours for long period. Highly flammable, do not bring near naked
Flame. Keep in cool place. Use in a well ventilated place/room.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
LC 100 ideal to remove not only calcium carbonate &
calcium phosphate deposits but also calcium sulfate
and barium sulfate as well.
LC 122 is an effective wide band micro-biocide designed
for use in algae and bacteria control. It does not cause
foaming and is not lost by evaporation from the system.
It is a concentrated blend of organo-sulfur compounds,
which should be added only after proper dilution by slug
feeding.
Application:
Use to control algae and bacteria in re-circulating commercial and industrial
water cooling towers. Prior to its use, systems be cleaned to remove algae
growth, microbiological slime and other deposits.
Dosage:
Initial slug additions of LC 122 per 1,000 gallons of water should be
employed every 1 - 5 days or as needed. The frequency of addition
depends upon the relative amount of bleed-off and the severity of the
microbiological problem. Slug additions should be made in the sump of the
cooling tower. During very hot weather, greater frequency or higher dosage
may be required to increase its effectiveness.
Handling & Precaution:
It is a very strong alkaline treatment and may cause eye damage and skin
irritation. Do not get in eyes, skin or on clothing. Wear goggles or face shield
and rubber gloves when handling. Avoid contamination of food. Harmful or
fatal if swallowed. In case of skin contact wash with plenty of soap and
water. Remove contaminated clothing and wash before reuse. If product
gets in the eyes, flush immediately with copious amount of clean cool water
for at least 15 minutes. If swallowed, call physician. Do not induce vomiting
or give anything by mouth to an unconscious person.
Packaging:
Available in pail of 20 lt.. Can also be custom packaged.
LC 123 is specially formulated for large installations high
hardness water. It is developed for effective, economical
cooling water treatment at hospitals, hotels, large apartment
houses, office buildings and other industrial and institutional
cooling installations with high hardness make-up water. It
contains no phosphates, chromate, zinc, or other chemicals
that cause pollution problem. Helps control mineral
deposits, sludge and surface pitting and does not stain
automobiles or buildings.
Application
Use a reliable automatic proportioner with timer for controlled dosage.
Follow instructions for calculated bleed of rate and recommended daily
maintenance treatment as suggested by the Field Chemist Personnel. The
dosage and treatment program depend on size of installation and water
hardness (ppm).
Dosage
Initial treatment : Add 1 gallon of LC 123 per 2,000 gallons of recirculating
water. Maintenance treatment as per size of installation &
hardness (consult our Technician)
Handling & Precaution
Wear protective clothing and eye protection should be provided and worn.
In case of skin contact, immediately flush thoroughly with plenty of clean
water. In case of eye contact, flush with copious of amounts of water for 15
minutes and obtain immediate medical attention. Refer to MSDS for more
specific directions.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
LC 124 is an effective chlorine based designed for use in
algae and bacteria control. It does not cause foaming. It
is a concentrated blend of organo-chloro compounds
which should be added only by slug feeding.
Application:
Use to control algae and bacteria in re-circulating commercial and industrial
water cooling towers. Prior to its use, it is advisable that systems be cleaned
to remove slime and other deposits.
Dosage:
An initial slug addition of 1 gallon of LC 124 per 2,000 gallons of water
should be employed every 1-4 days or as needed. The frequency of
addition depends upon the relative amount of bleed-off and the severity of
the microbiological problem. Slug additions should be made in the sump of
the cooling tower. During very hot weather, greater frequency or higher
dosage may be required to increase its effectiveness.
Handling & Precaution:
It is a very strong treatment and may cause eye damage, mucous attack
and skin irritation. Do not inhale, get in eyes, skin or on clothing. Wear
goggles or face shield and rubber gloves when handling. Avoid
contamination of food. Harmful or fatal if swallowed. In case of skin contact,
wash with plenty of soap and water. Remove contaminated clothing and
wash before reuse. If product gets in the eyes, flush immediately with
copious amount of clean cool water for at least 15 minutes. If swallowed,
call physician. Do not induce vomiting or give anything by mouth to an
unconscious person.
Packaging:
Available in pail of 20 lt.. Can also becustom packaged.
LC 255 is a versatile and highly effective rust
preventative for use on unpainted metals during outdoor
storage or overseas shipping. LC 255 protects metal
with heavy waxy film. It does not require any surface
cleaning or preparation and covers the metal like a paint,
but easily removable.
LC 255 provides protection for storage of metal,
equipment, tools, tanks, structures, machinery, castings,
fittings, valves, doors, frames, fixtures, jigs, etc.
Application:
LC 255 can be applied by spraying, brushing or dipping. It is
recommended to apply by dipping in a tank with water draining
facilities which ensures maximum coverage, penetration and
cost effectiveness. LC 255 absorbs water and moisture while
lubricating plated surfaces and bare metals such as steel, iron,
alumunium, copper, brass and lead.
Handling & Precaution:
Avoid contact with eyes and skin. In the case of contact with
eyes, wash immediately with plenty of water. Seek medical
advice. If ingested, do not induce vomiting, seek medical
attention.
Packaging:
Available in pail of 20 lt.. Can also be custom packaged.
KB 201 is a powerful porcelain cleaner for brightening
& cleaning porcelain surfaces. It contains complexing
agent, sequestering agent, scale remover, wetting
agent and specialized blooming remover. It is a
specialized product and requires careful application
methods. WRONG & UNWANTED APPLICATIONS
NOT PRESCRIBED, MAY CAUSE UNEXPECTED
RESULTS & DAMAGE. Must be diluted before use.
Never use on glazed surfaces.
Application:
Pour diluted KB 201 on the surface to be cleaned, allow it to react for 2 –
20 minutes, depending on the type of stain & dilution factor. After that,
brush with soft brush then rinse thoroughly with clean water. Make small
test spot to verify result before actual use.
Dosage:
Dilute with water depending on the cleaning work. Can be diluted up to
50 times or more.
Handling & Precaution:
Contains only organic acidic compounds. Do not ingest. Do not get in
eyes, on skin or clothing. Keep the container closed when not in use.
Avoid breathing the mists. Wear a mask when handling. Use sufficient
ventilation to prevent build-up or mists. KEEP AWAY FROM CHILDREN.
Packaging:
Available in pail of 20 lt.. Can also be custom packaged.
KB 224 is a special water based polymer with silicone specially
designed to protect and keep a shine & wet look on vinyl, rubber,
plastic and leather or other such surface materials.
KB 224 protect surfaces from fading and cracking by reducing
ultraviolet light, while bringing out color, restoring luster and
shine, protects against abrasion. Eliminates static electricity to
reduce dirt attraction. If less shine is desired, lightly buff with
damp cloth.
Application:
Apply KB 224 with a clean cloth or sponge ( or spray ) with a cleaning
action. Spread evenly, allow to penetrate and chemically bond for a few
minutes then remove excess for a beautiful protective shine. On some
surfaces a two coat application provides best results. Apply as needed to
maintain shine and protective coating.
Dosage:
Use undiluted product.
Handling & Precaution:
This product may caused slipperiness on certain surfaces until it is
completely dry. May caused smearing on glass or other transparent
services. Avoid spills on eyes. Should avoid prolonged unnecessary contact
with skin. May irritate when exposed for a longer period on certain sensitive
skin. Harmful if swallowed. Keep away from children. Keep container
capped in a cool dry place
Packaging:
Available in pail of 20 lt.. Can also be custom packaged.
KB 273 is concentrated degreaser specially formulated to
penetrate, emulsify and disperse oil, grease, dirt, soot and
burnt / residual carbon from a variety of hard surfaces.
Specially designed for use in ovens, grills, chimneys, exitways,
smoke escapes, air vents where thick deposit of
soot/carbon is common by found. Most effective for oily
residues and its water base composition make easy
flushing.
Application:
Allow soaking time ( 5 – 30 minutes ) for effectiveness. Apply a
thin layer by spraying or brushing, then leave for soaking. Brush
and scrap gently to remove any hard soils if required then flush
with water. ( Use KB 212 for best results ) Protective measures is
suggested for cleaning personnel
Dosage:
Dilute with ratio of 1 : 10 ( max. ) with water depending on the dirt
thickness. Use concentrated product or lower dilution for tougher
stains. Dilute up-to 50 times for regular cleaning work. Repeat if
necessary
Handling & Precaution:
Avoid eye contact. Should avoid prolonged contact with skin.
Harmful if swallowed. Use protective gloves where contact is in
evitable
Packaging:
Available in pail of 20 lt.. Can also be custom packaged.
Catalyzed Oxygen Scavenger with polymers for
preventing pitting. Ideal for use with both hard and presoftened
make-up water.
Application
Can be injected directly into the boiler by means of a proportioning pump.
Advisable to gradually feed LC 102 by means of a chemical proportioning
pump into the storage section of the de-aerating heater as far ahead of
the boiler as possible to provide maximum effectiveness in high pressure
boiler operating from 100-600 psi. or where large amount of water is used.
Dosage
Initial : 3 quarts per 1,000 gallons or 3 : 4000
Maintenance: 1 quart for every 1,000 gallons of make-up water or 1 : 4000
Maintain 20-50 ppm (mg/l) in the boiler water. LC 102 can be used in
conjunction with other formula in our product line, but should not be used
in a boiler operating in excess of 600 psi.
Handling & Precaution
LC 102 is mildly acidic product and should be handled with care to prevent
personal injury. Wear protective clothing and eye protection. In case of
contact with skin, immediately flush with water. In case of contact with
eye, flush with water for 15 minutes and obtain immediate medical
attention.
Packaging
Available in pail of 20 lt.. Can also be custom packaged
LC 104 is an ideal single product boiler internal treatment, specially
formulated by blending sludge conditioner & oxygen scavenger for dual
function in packaged boiler systems. It can control not only calcium
carbonate & calcium phosphate deposits but also calcium sulfate and
barium sulfate. Highly concentrated alkaline product. Eliminates excessive
precipitation of solids and reduces sludge accumulation. The oxygen
scavenger prevents pitting corrosion in the boiler system. It is
environmentally safe, non-hazardous and non-corrosive.
Application
Used in packaged boilers below 5 Tons/Hr. For use with make-up water
hardness below 150 ppm and effectively disperses iron oxides as well as
calcium phosphate and clay. Injected directly into the boiler by means of a
proportioning pump.
Dosage
Initial : 2 quarts per 100 gallons or 1 : 200 ratio
Maintenance: 1 quart for every 100 gallons of make-up water or 1 : 400 ratio
Maintain 15-25 ppm (mg/l) of orthophosphate in the boiler waters with pH
between 11.0 – 12.0. Maintain Conductivity below 3000 µmho/cm. Consult
LifeChem Technical Services when Hardness is low or high.
Handling & Precaution
LC 104 is an alkaline product and should be handled with care to prevent
personal injury. Wear protective clothing and eye protection. In case of contact
with skin, immediately flush with water. In case of contact with eye, flush with
water for 15 minutes and obtain immediate medical attention. Triple rinse used
cans before reuse or disposal. Refer to MSDS for detailed information.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
LC 200A is safe, phosphatic alumunium cleaner and
brightener. It’s strong formula will dissolve any oxide layer and
also has the added benefit of providing a protective phosphatic
layer to keep aluminum surfaces looking at their best. The
non-toxic formulation also prevents further oxidation of the
surface and repels dust build up owing to its electrostatic
effect. It has penetrating agents that clings to alumunium
surfaces for maximum effective cleaning result.
Application
Use LC 200A undiluted for initial cleaning and brightening on tough or built-up soil
problem. Use diluted product for regular cleaning. Determine dilution depending on
contamination type & frequency of cleaning. For on-going maintenance use LC 301
for a protective and shiny coat. For maximum cleaning, apply LC 200A with a highpressure
washer
Dosage
The dilution will vary, depending on the condition on the surface to be cleaned. For
best result, rinse with a high-pressure washer or apply with a brush. For normal
cleaning & brightening; apply LC 200A at a dilution up to 1:20 with water. Allow the
solution to react with the surface for 1 – 3 minutes, and then rinse thoroughly with
clean water through a pressure washer. Do not allow LC 200A to dry on the surface.
Repeat application if necessary.
Handling & Precaution
Contains mild acid. Do not ingest. Do not get in eyes or clothing. Wear a face shield,
neoprene rubber gloves & protective clothing if spattering is expected. Keep the
container closed when not in use. Avoid breathing the mists if produced during
application by spraying. Use sufficient ventilation to prevent build-up of mists during
application.
Packaging
Available in pail of 20 lt. Can also be custom packaged.
Lc 270 is a water based general purpose cleaner to
Penetrate, emulsify and disperse oil, grease, dirt and
Grime and other types of soils from a variety of hard
Surfaces. Ideal for cleaning walls, floors, desks, light
Fixtures, automobiles, painted woodwork. Also can be
Used on metal surfaces such as stainless steel,
Aluminum, cooper and brass.
Application
Spray, mop, brush wipe, dip method are recommended. Use for
Cleaning walls, floors, desks, light fixtures, automobile, painted
Wood work.
Dosage
Dilute with ratio of 1 : 10 with water depending on the dirt
Thickness
Handling & precaution
Avoid spills on eyes. Should avoid unnecessary contact with
Skin. Can irritate when exposed for a longer period. Harmful if
Swallowed.
Packaging
Available in pail of 20 lt. Can also be custom packaged.
Lc 300 is a designed specifically for stains on granite
Surfaces arising out of contamination during production
Or due to storage. It is very effective for stains on granite
Surfaces due to poor quality water, inproper storage &
Soil contamination. It is an acid based special blend of
Selected penetrants, emulsifiers, dispersant & solvent
Carriers designed to effectively penetrate, react, dissolve
& remove the stains from the surfaces as well as deeper
Into the granite structure without affecting the surface.
Application
Make sure that the granite surfaces are free from dust, soil & dirt. Apply lc 300 on
The pre-treated surface by brushing to leave a thin uniform film on the whole
Surface. Do not leave any surface untreated. Wait until 15-30 minutes or more until
The stains start dispersing. Rinse and wipe clean the whole surface with demin
Water. For deeper & thicker stains, repeat the process. May not be suitable for
Certain types of granite & marble. Always make a test sample before final
Application.
Handling & precaution
Avoid contact with eyes, skin and clothing. In case of contact, immediately wash
With plenty of water. Harmful if swallowed.
Packaging
Available in pail of 20 lt.. Can also be custom packaged
.
Multi type glass cleaner
Kb 208 can be used to remove stains from hard surfaces
Including metallic and non-metallic surfaces like glass, ceramic,
Melamine, etc. The key to an effective cleaning depend on proper
Dilution & soaking time. It’s food-grade quality allows its use in
Places where cleaned surfaces may have direct contact with food.
Kb 208 is designed specially for use in places where the use of
Acidic products are not recommended. It’s strong disinfectant
Function kills most common microbes & disease causing bacteria.
Application
Kb 208 must be diluted with water for soaking, dipping etc. May also be used by
Brushing & scrapping. Dilution depend on soak time, for faster action use lower
Dilution ratio that is higher concentration. May be diluted up to 500 times or more. It
Has disinfectant function.
Dosage
Add about 100 gm/100 ml of kb 208 to about 100 lt. Of water or as required for
Soaking and dipping. Use higher concentration for faster action and tougher stains.
Agitation gives better result. Re-use solution until turbidity is high. Required to
Repeat the process if necessary. When the cleaning process is complete, flush with
Clean water. Use concentrated product for manual cleaning
Handling & precaution
This product is alkaline and should be handled with care to prevent personal injury.
Avoid prolonged skin contact and breathing of the fumes. Refer to material safety
Data sheet for more specific procedures and directions. Discoloration may
Result when contact with colored clothing.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Cleaning vinyl surfaces from dirt, grease, oil, and dust. Suitable for carpet cleaning vinyl flooring and other vinyl surfaces. Safe to use on metal surfaces such as stainless steelm aluminum, copper, brass.
Clean the floor with a perfect and refreshing fragrance.
Kb 217 is a special water based carpet cleaner to
Penetrate, emulsify and disperse oil, grease, dirt and stains on
Fibers of synthetic carpets. Ideal for cleaning synthetic carpets
Normally used on floors of office buildings, hotels, hospitals &
Other public places. This formulation does no have any adverse
Effect on painted surfaces including walls, wood and also metals
Like stainless steel, aluminum, copper and brass. The room is
Filled with a refreshing fragrance from kb 217 after the cleaning
Work.
Application
Use diluted kb 217 ( 1 : 5 up to 1 : 20 with clean water ) with standard carpet
Cleaning equipment like mopping machine & wet vacuum cleaner. Apply & spread
The solution of kb 217 to the carpet surface and allow a soaking time of 2 – 10
Minutes before scrubbing rinsing & final mopping. The wet carpet should be
Properly mopped with standard equipment & procedure until dry.
Always make a test patch to confirm color fastness & soaking
Time.
Kb 217 can also be filled in directly into the detergent container provided with
Certain carpet cleaning equipment which has a facility for it.
Dosage
Dilute with water depending on the cleaning work & stain. Can be diluted up to 20
Times. Direct applications of the undiluted product may be required on highly
Stained areas
Handling & precaution
Avoid spills on eyes. Should avoid prolonged unnecessary contact with skin. May
Irritate when exposed for a longer period on certain sensitive skin. Harmful if
Swallowed. Keep away from children. Keep container capped in a cool dry place
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 120 is a product which effectively prevents scale and
Corrosion in cooling towers having very soft waters which
Are more corrosive, have a rysnar index over 7 and
Calcium 25 – 75 ppm in the make-up water. It is an
Excellent dispersant for calcium phosphate, iron oxides
And clay. This product is used where heavy metals and
Zinc is not allowed in effluent waters. Lc 120 is a
Hydroxy-phosphonoacetic acid with polymers and copolymers
To control scaling. It also has inorganic
Phosphate and sodium tolytriazole to prevent corrosion
And pitting of all metal surfaces.
Application
Injected directly into the circulating pipe upstream from the condenser.
Cycles of concentration will vary from 5 – 20 as a probable upper limit. For
Higher limits consult our laboratory.
Dosage
Feed lc 120 from a chemical mix tank or directly from the drum by means
Of a proportioning pump at the rate of 0.5 pound / 1, 000 gallons of make-up
Water. Adjust the dosage to maintain 5 – 10 ppm of orthophosphate in the
Circulating water. A ph of 8.0 – 8.5 must be maintained.
Handling & precaution
Protective clothing and eye protection should be worn. In case of skin
Contact, immediately flush thoroughly with plenty of clean water. In case of
Eye contact, flush with copious of amounts of water for 15 minutes and
Obtain immediate medical attention.
Packaging
Available in pail of 20 lt.. Can also be custom packaged
.
Lc 238 is designed specially for use in systems where the use
Of concentrated acidic or concentrated alkaline descalers are
Not recommended. This product is specially formulated for
Specific cleaning and descaling purposes for sensitive system.
Lc 238 may be re-circulated by means of a high volume pump
For the removal of scale. Lc 238 can be used safely on to
Copper & brass surfaces besides being very effective in steel
System.
This product contains organic poly acrylic & polymer
Compound.
Application
Lc 238 may be soaked overnight and re-circulated. When scale is
Present, the tubes should first scraped out to remove as much as possible
And then flushed out with a hose.
Dosage
Circulate an appropriate concentrated solution based on the scale and
Corrosion. For storing / stand by system use lc 253 or lc 252. For more
Detail and specific method and concentration, please consult lifechem
Technical services.
Handling & precaution
This product ph is between 4.0 – 9.0 and should be handled with care to
Prevent personal injury. Protective clothing, gloves and eye protection
Should be worn. In case of skin contact, immediately flush thoroughly with
Plenty of clean water. In case of eye contact, flush with copious amounts
Of water for 15 minutes and consult a physician. Refer to material safety
Data sheet for more specific procedures and directions.
Packaging
Available in pail of 20 lt.. Can also be custom packaged
.
Lc 239 is a very strong descaler for destroying the most
Difficult scales. It effectively removes difficult scales, rust,
Oxides of metals, silica scale and hard soil from metal and
Other surfaces. It’s dissolving action is quick and thorough.
Most cost effective descaler when combined with lc 230,
Lc 233, lc 232 and lc 231. Do not use on materials like
Glazed tiles and glass. Must be used after dilution only.
Application
Dilute and blend with other descalers as necessary before dipping, brushing or
Spraying on surfaces. Clean surface free from excess rust, soil and dirt. Apply lc
239. Allow to stand for 10-20 minutes, then flush off with water. Surface may
Require repainting if necessary. Recommended to use lc 240 for neutralization
And lc 252 for passivating the native surface on ferrous metals. Avoid contact
With unwanted surfaces.
Dosage
For descaling purposes, dilute one part lc 239 with up to 20-100 parts of water
Depending on the type and thickness of scale and method of application. Allow to
Stand / circulate for several hours or as necessary. Flush with water until all the
Scale is removed. Repeat if scale is still present, check ph during application for
Control. Contact field chemist for further information. Do not use above 2% with
Non-chemical pumps for circulation
Handling & precaution
Strongly acidic. Irritating to eyes and skin. After contact with skin wash
Immediately with plenty of water. In case of eye contact irrigate thoroughly with
Water for at least 15 minutes. Seek medical advice. Avoid direct contact with
Glass, tiles and other such surfaces. Use adequate protective measures during
Use.
Packaging
Available in pail of 20 lt. Can also be custom packaged.
Lc 240 is a highly alkaline concentrated product designed
For neutralizing the metal surfaces that is susceptible to
Corrosion. Lc 240 consists of a blend of soluble carbonate,
Hydroxide and corrosion inhibitors. It is designed to control
Corrosion and neutralize any acid left from “acid cleaning”
Processes. It contains no chromate or heavy metals. It is
Food grade, user & machine friendly and environmentally
Safe. Neutralized mixtures can safely be disposed into
Sewers. [ p – powder / l – liquid ]
Application
Can be added directly into the liquid volume to give a 1% to 5% solution or add till
Ph value is between 6 - 8, which then may be used for neutralization & protection.
For offline storing purposes a 0.5% solution may be quite effective. The surface to
Be neutralized or get protection must receive a minimum of 5-10 minute contact
Time.
Dosage
Dosage is calculated depending on the circulating or storing volume and the time
Of contact. A diluted solution of 0.5% up to 5% is recommended. Use concentrated
Solution for less contact time & higher initial conditions, where as a 0.5% solution
May be used for storing. Ensure ph value between 6 – 8 before disposal.
Handling & precaution
This product is quite alkaline and should be handled with care to prevent personal
Injury. Protective clothing and eye protection should be provided and worn. In case
Of skin contact, immediately flush thoroughly with plenty of clean water. In case of
Eye contact, flush with copious of amounts of water for 15 minutes and obtain
Immediate medical attention.
Packaging
Available in pail of 20 lt. Can also be custom packaged.
Lc 214 is a special blend of penetrants, chlorinated
Solvents, surfactants and emulsifiers designed to easily
And quickly strip paint and varnish from metals, concrete,
Brick, wood and most hard surfaces.
The deep penetrating action of lc 214 soften though
Paint and removes it without scraping.
Lc 214 is homogeneous which adheres to vertical and
Inverted surfaces and activate paint coating quickly.
Application
Brush, wipe or apply a heavy coat of lc 214 on the area to be
Treated. For the reaction to be completed, allow lc 214 to
Remain until old paint bubbles or wrinkles. Flush with water or
Remove with scrapper. More than one application may be
Required for areas of very heavy paint build-up.
Dosage
One ( 1 ) liter of lc 214 can be used over an area of 3 – 5 m2
.
Handling & precaution
Avoid contact with skin. In case of contact, wash affected areas
With water.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 253 is an alkaline concentrated food grade product
Designed for “passivating“ as well as neutralizing the
Metal surfaces that is succeptable to corrosion. Lc 253
Is also an alkaline formulation of phosphate, polymeric
Dispersants and corrosion inhibitors. It is designed to
Control corrosion and neutralize any acidic left over from
Acid cleaning processes. It contains no chromate or
Heavy metals.
Application
Can be added directly into the raw water to give a 2% to 10% solution,
Which then may be used for “passivating”, “neutralization” & “protection”.
For offline storing purposes a 0.5% solution may be quite effective. The
Surface to be passivated, neutralized or get protection must receive a
Minimum of 15-30 minute contact time.
Dosage
Dosage is calculated depending on the circulating or storing volume and
The time of contact. A diluted solution of 0.5% up to 10% is recommended.
Use concentrated solution for less contact time & higher initial conditions,
Where as a 0.5% solution may be used for storing.
Handling & precaution
This product is quite alkaline and should be handled with care to prevent
Personal injury. Protective clothing and eye protection should be provided
And worn. In case of skin contact, immediately flush thoroughly with plenty
Of clean water. In case of eye contact, flush with copious of amounts of
Water for 15 minutes and obtain immediate medical attention.
Packaging
Available in pail of 20 lt.. Can also be custom packaged
Lc 252 is designed to be used for “passivating” open &
Closed loop systems to prevent corrosion. It is a liquid blend
Of nitrite and other corrosion preventives which protects not
Only steel surfaces but also copper and other metal as well.
The high concentration makes it a cost effective nitrite based
Passivating agent with the added advantage of being multimetal
Compatibility and thus do not require separation of
Non-ferrous parts from a system during passivation.
Application
Normally injected into the system that is previously filled with standard industrial
Grade water and circulated continuously under required pressure for about 1-2
Hours with hourly monitoring of the nitrite concention. A higher temperature help to
Accelerate the passivating process and therefore reduce operation time. An
Appropriate temperature suitable to the system and available resources is choosen
Between 35 – 950c
Dosage
Initial : 1 : 400 is suitable in most cases of passivation processes operating at
Optimum temperature between 50 – 700c. Depending on the quality of water used
Some adjustment in the amount may be required to maintain the ph of the solution.
An increase in concentration of lc 252 is necessary in badly soiled systems.
Additional amount of lc 252 may be required to be added during the circulation for
The passivation process in order to maintain the required control parameters while
Monitoring.
Handling & precaution
Avoid contact with acid, ammonium salts and activated carbon. No respiratory
Protection. Is required, however, maintain adequate ventilation. Use rubber gloves
And safety goggles when handling.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 271 is a strong solvent based degreaser and
Decarboniser for the rapid removal of oil, grease, paint,
Adhesives and waxes from metal components and
Machinery. The mechanism of cleaning involves a quick
Penetration of lc 271 to soften polymerized oils
Associated with the carbon deposit. Then the deposit is
Loosened and easily dispersed into the solvent. The
Powerful solvents act quickly to break the bond between
The deposits and the metal surface. Lc 271 is safe to
Use on ferrous and non-ferrous metals, concrete and
Ceramics.
Application
Ideal to use in metal dip tanks, spraying, wiping etc. Item to be descaled,
Decarbonised or degreased should be immersed below the surface. Loose
Soiling should be removed prior to immersion. After removal allow them to
Drain for 10 minutes. Then, rinse with low pressure water. Keep container
Covered for control evaporation.
Handling & precaution
Harmful if inhaled. May cause burns to eyes and skin. In case of contact
With skin, wash immediately with plenty of water. Ensure adequate
Ventilation at the point of use. If swallowed, seek medical attention.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
Lc 272 is a water based concentrated degreaser to
Penetrate, emulsify and disperse oil, grease, dirt, soot,
Grime and other types of soils from a variety of hard
Surfaces. Safe for all types of metal surfaces.
Specially designed for use in ovens, grills, chimneys, exitways,
Smoke escapes, air vents & other such places
Where thick deposits of oil/grease with soot / carbon is
Common.
Application
Allow soaking time for effectiveness. Apply a thin layer by spraying or
Brushing, then leave for soaking. Brush and scrap gently to remove any hard
Soils if required then flush with water.
Dosage
Dilute with ratio of 1 : 5 with water depending on the dirt thickness. Use
Concentrated product or lower dilution for tougher stains. Dilute upto 50 times
For regular cleaning work.
Handling & precaution
Avoid spills on eyes. Should avoid unnecessary contact with skin. Can
Irritate when exposed for a longer period. Harmful if swallowed.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.
LC 201 is a strong porcelain cleaner for brightening &
cleaning difficult to clean porcelain surfaces. It’s special
formula contains complexing agent, scale remover,
wetting agent and specialized blooming remover. It is a
specialized product and requires careful application
methods.
WRONG & UNWANTED APPLICATIONS NOT
PRESCRIBED, MAY CAUSE UNEXPECTED RESULTS
& DAMAGE. Do not use undiluted. Make test spot before
application.
Application
Pour diluted LC 201 on the surface to be cleaned, spread it uniformly and allow it
to react for 2 – 20 minutes, depending on the type of stain & dilution factor. After
that, brush with soft brush then rinse thoroughly with clean water. Most effective
on dry surfaces, wear gloves during application. Never use on glazed surfaces.
Dosage
Always dilute with water depending on the cleaning work. Can be diluted up to 80
times.
Handling & Precaution
Contains only organic acidic compounds. Do not ingest. Do not get in eyes, on
skin or clothing. Keep the container closed when not in use. Avoid breathing the
mists. Wear a mask when handling. Use sufficient ventilation to prevent build-up
or mists. KEEP AWAY FROM CHILDREN. Use protective gloves
Packaging
Available in pail of 20 lt. Can also be custom packaged
.
