Fep Heat Shrink Tube

Products Infomation: FEP Tubing Used in applications ranging from environmental monitoring equipment to medical applications and electronics applications.forbest manufacturing manufactures a wide range of custom and stock sizes of FEP tubing. PTFE Tubing FEP Tubing is most referred to under the name "PTFE Tubing". PTFE is actually three different polymer resins: FEP, PTFE, and PFA. Applications Applications where FEP tubing is chosen usually require more clarity, flexibility or a lower heat shrinkable temperature than PTFE. Advantages of FEP Tubing Lower heat shrink temperature than PTFE More flexible than PTFE More optically clear than PTFE More lubricious than PFA

Products Infomation: Heat-shrinkable silicone rubber tubing. The inner diameter shrinks by about 50% simply by heating. Heat shrinkable silicone rubber tubing are used for insulation, protection, and sheathing applications. These rubber tubings have superior heat and cold resistance, flexibility, and electrical insulative properties. They typically maintain their performance characteristics over a wide temperature range, from -50°C to +200°C. Our heat-shrinkable tubing shrinks quickly by heating, and even complex shapes can be sheathed, thereby saving labor in the work process. They exhibit stable electrical properties even in the harshest conditions. Usage : Mainly used in medical equipment, household electrical appliances, aerospace, military industry, automobile manufacturing, electronic components, transformers, motors, etc.

1. Manufactured from silicone rubber. 2. Offering good mechanical,insulation and sealing protection. 3. Accommodating a wide range of cable sizes. 4. For indoor or outdoor applications. 5. Simple and fast installation. 6. Color: Grey, black,ect.

PVC shrink label Features: -Reverse printed label available upto 8 colours. -Normally it is used in thickness of @ 30 - 35 microns and shrinkage 40 % width wise and 15 - 20 % length wise for product wrapping grade, while for labelling purpose shrinkage is same width wise but length wise it is max of 5%. -Applied with @ 150'C hot air gun -Used for labelling of product , tamper & pilfer proof packing. 500 nos. Bundled is packed in bulk in corrugated boxes which is then box strapped and finally stiched with jute bags or HDPE bags from outside.

Place of Origin: China The cold shrink cable accessories are made of imported Liquid silicon rubber Material. They not only have excellent electric performance, but also excellent physical performance, such as high elasticity, a long life span and constant shrink pressure, and they don't need a flame or special tools for heating. It's very easy to install it. Features: 1) For 1-core or 3-cores XLPE 2) Cable section area from 25-500mmsqmm 3)Produce as many size as the customer demands 4)High expansion ratio Plastic and paper box

SUNBOW silicone cold shrink tube has been used in 5G base stations, installation is twice as fast as peers For the big market of 5G base stations, although many silicone cold shrink tube manufacturers continue to increase research and development efforts, few manufacturers can really install silicone cold shrink tubes quickly. It is very confident to say that SUNBOW silicone cold shrink tube is currently the only product in China that can be quickly installed, and it is twice as fast as its counterparts. The vast majority of silicone cold shrink tubes made in domestic factories have practically no difference in performance. Because silicone cold shrink tubes are made of special silicone rubber materials, the only difference is the installation problem. The silicone cold shrink tubes manufactured by more than 80% of the factories are as follows: 1. Need to push the cold shrink tube to the root of the joint as much as possible, and start to carefully pull out the support bar; 2. Push the cold shrink sleeve towards the root of the joint while pulling the support core rope, and observe at the same time until the cold shrink sleeve is firmly contracted at the joint root of the joint; 3. Do not push, pull or shake the cold shrink sleeve afterwards, otherwise the shrinkage may not be firm or damaged; 4. If the drawing is not smooth, do not force it, you should complete the installation of other cold shrink sleeves. The matters needing attention during installation are as follows: 1. It is strictly forbidden to wrap the cold shrink sleeve when it is installed, otherwise it will easily cause the water inlet and waterproof failure; 2. Use a wrench to tighten the adjacent connector where the shrink sleeve joint is installed, otherwise it will cause damage to the shrink sleeve. SUNBOW understands that users spend a lot of energy and time when installing the silicone cold shrink tube, so they developed a silicone cold shrink tube that simplifies the installation. You only need to pull the silicone cold shrink tube to support the entire installation process. The installation time is twice as fast as its counterparts, and there will be no installation errors caused by functional aging or damage.

Cold shrink tube open-ended, tubular, rubber tube which are factory expanded and assembled onto a removable core. The core is removed after the tube has been positioned for installation over an inline connection, terminal lug, etc., allowing the tube to shrink and form a water-resistant seal. The tube is made of silicone rubber which contains no chlorides or sulfurs.

Supplier: Medical silicone tubing, peristaltic pumb tubing, silicone fiber glass tubing, heat shrinkalbe tubing, pvc tubing , silicone rubber wire, fiberglass tubing , teflon tubing, plastic tubing
Buyer: Silicone rubber material

Pure silicone heat shrinkable tubing not only has excellent properties of the silicone tube itself commonly, resistance to high temperature,high pressure resistance, sof and elastic, and also have thermal shrinkage performance, excellent wear resistance and cutting resistance, corrosion resistance and chemical reagent resistance. Can be use for a long time under high temperature 200 degrees celcius, widely used in military or commercial areas need liquid corrosion resistance under high temperature, resistance to fuel, lubricant, acid resistance and chemical solvents.