Dynamometric Force Bottle

BT ETA TORQUE - Dynamometric Torque Bottle DESIGNED TO BE INSTALLED UNDER CAPPING HEADS AT2E’s BT ETA TORQUE is built in with special mechanism permitting to avoid top load influence on measurement. It’s also built in a high speed electronic reading of measurements. Device can be custom-made according to different bottle or can profile. Using with our BT ETA Measure software, it’s very convenient for users to save, manage and analyse the data. Technical specifications: • Digital display • Measures in opening and closing directions • Measuring range: 00.00 to 60.00 Kgf.cm • 2 Measuring modes (continue, peak) • Units: Kgf.cm / Inch.lbs / N.m / N.cm • Accuracy: ? 0.5 % of full scale • Loading by USB (PC) • Delivered with COFRAC certificate • Transport case • 110/230 V - 50/60 Hz • Save up to 24 groups of data or 120 seconds of continued data.

Manual Bottle Cap Torque Tester is designed to measure the open force and lock force of the caps of bottles, spout bags, and flexible tube packages. The forces can influence the transportation and consumption of products greatly and are very important for online and offline production. Features Touch interface is more easier to operate. Two measurable modes for open force and lock force. Testing results with standard units are convenient for reference and comparison of data. Functions of settable numbers of tests, deletion of data and statistical analysis are attained. Instrument's system is equipped with over-load protection, automatic zeroing, and error alert for safe operation. RS232 port facilitates to transfer data and connect with PC. Network ports effectively transfer data and develop the management. Standards ASTM D2063, ASTM D3198, ASTM D3474, GB/T 17876, BB/T 0025, BB/T 0034 (GB/T 14803) Applications Basic Applications: bottled packages for food, pharmaceuticals, e.g, beverage or tablet bottles. flexible tube packages for food, pharmaceuticals and cosmetics, e.g, eye-drop, hand cream and shoe polish, etc. Extended Applications: screws Technical Specifications Load Cell Capacity 20 Nm (Standard) 40 Nm (Optional) 50 Nm (Optional) Accuracy 1%FS Resolution 0.001 Nm Clamping Range 5 mm ~ 190 mm (Diameter) Dimension 350mm (L) 240mm (B) 140mm (H) Net Weight 19 kg Configurations Standard: Instrument, Micro-Printer. Optional: Professional Software, Communication Cable.

Coefficient of Friction Tester is specialized in measuring the static and dynamic coefficients of friction of plastic film and sheet, rubber, paper, cardboard, woven bag, fabric style, metal material composite belt for communication cable and optical cable, conveyor belt. By measuring the smoothness of materials, the quality of materials can be controlled and adjusted. In addition, it can be used to determine the smoothness of cosmetics, eye drops and other daily chemical products. Features The dynamic and static coefficient of friction of the samples can be measured simultaneously in one test. The speed can be adjusted to support different sliders. The instrument can meet the requirements of GB, ISO and ASTM and the testing method can be selected according to the demands of customers. The table and slide block are degaussed and processed by remanence , which effectively reduces the testing error. The tester is equipped with touch interface and controlled by micro-computer, which is convenient for users to carry out operation and view data. With professional software it can automatically process statistical analysis and reanalysis of original data of single and group results. In addition,superimposed comparison in group curves and multiple reports which can directly show the testing results to customers are obtained. Micro-printer and standard USB interface facilitate the external connection and transmission between the instrument and data sharing system of laboratory. Principle The two experimental surfaces are placed flat together. Under a certain contact pressure, the two planes move relatively to each other and the required force is recorded. The weight of the slider divided by the test force is the friction coefficient. Standards GB/T 10006, ISO 8295, ASTM D1894, TAPPI T816, HG/T 2729. Applications Basic Applications Plastic Films and Sheets, Paper and Paperboard, Textiles, Non-woven Fabrics and Woven Bags, Rubber, Aluminum Foils, Aluminum Foil Composite Films, Metal Products, Printing Matters. Extended Applications Wood and Flooring, Photographic Films, Grains, Hair, Pipes, Ball Shaped Materials, Medical Tubes, Lacquered Wires. Technical Specifications Test Range 0 ~ 5N (Optional: 0 ~ 10N) Accuracy 0.5%FS Stroke 70 mm, 150 mm Weight of Slider 200g (Note: sliders can be customized) Test Speed 100mm/min, 150mm/min (Adjustable) Dimension 630 mm (L) 360 mm (W) 230 mm (H) Power Supply AC 220V 50Hz Net Weight 33 kg Configurations Standard: Instrument, Micro Printer, Slider of 200g. Optional: Communication Cable, Professional Software, Non-standard Slider, Sliders of 1000g and 500g

Seal Integrity Tester is suitable for sealing test of products. It can effectively compare and evaluate the sealing process and sealing performance of the soft package through the test. It is an ideal testing instrument for food, plastic soft package, wet towel, pharmaceutical, daily chemical and other industries. Features Built-in air source unit, without external air source, plug in and use. Microcomputer control, automatic operation of pressure pumping, pressure maintaining, pressure supplement, timing, back blowing and printing. Equipped with touch interface and micro printer, which supports data preset and power-off memory to ensure the accuracy of test data. Imported world-class SMC pneumatic components with durable performance, stability and reliability. USB interface is reserved for the system, which can print out test data to meet different customer needs. Principle Firstly submerge the specimen in the water within the chamber, and then evacuate the vacuum chamber to form differential pressure between the inside and outside of the specimen. The property of leakage can be obtained by observing the steady progress of bubbles from the specimen and how the specimen expands and restores to its original shape after vacuum release. Standards ASTM D3078, GB/T 15171, GB/T 27728, YB00112002-2015, YBB00122002-2015, YBB00262002-2015 Configurations Instrument, Vacuum Chamber

Leak Detector and Seal Strength Tester is suitable for the quantitative measurement of sealing strength, heat sealing strength, binding strength, overall sealing performance, pressure resistance strength, cap body connection strength, bursting pressure and shedding strength. It is widely used in the soft package, plastic pilfer-proof caps, flexible pipes, etc. Features A.Compatible with international standards of GB, ASTM, ISO. B.Positive-pressure test method, easy to operate, stable and reliable performance. C.Wide test range for different applications. D.Dual test methods of restraint distension and unrestraint distension for customer's choice E.Different test modes of burst, creep and creep to failure to meet different test requirements. F.The "one key" operation in the test process is intelligent and efficient. G.Touch interface. Automatic statistics and printing of test data. H.Standard USB interface,software supports test results of multiple units display. I.The test data can be shared between LAN and Internet. Principle Positive-pressure method: after the gas with certain pressure fills into the specimen with setting parameters, the pressure sensor detects the change of air pressure inside the specimen� to judge the overall sealing performance of the specimen, and tests the pressure resistance and bursting performance of the specimen with the specified air pressure. Standards ASTM F1140, ASTM F2054, ISO 11607-1, ISO 11607-2, GB/T 10440, GB/T 18454, GB/T 19741, GB 17447, GB/T 17876, GB/T 10004, GB/T 10005, BB/T 0003, BB/T 0025, QB/T 1871, YBB 00252005, YBB 00162002 Technical Specifications Test Range 0 ~ 600 KPa; 0 ~ 87.0 psi (Standard) 0 ~ 1.6 MPa; 0 ~ 232.1 psi (Optional) Pressure of Air Source 0.4 MPa ~ 0.9 MPa (outside of supply scope) Air Connection 8 mm PU Tubing Dimension 300mm(L) x 310mm(B) x 180mm(H) Power Supply AC 220V 50Hz Net Weight 23 kg Configurations Standard: Instrument, Test Plate, Micro-Printer Optional: Professional Software and Communication Cable, Test Accessories (restraint plate test device: open package plastic anti-theft bottle cap sealing performance hose sealing performance; aerosol valve sealing performance) Note: 1. The gas supply port of the instrument is 8 mm PU Tubing; 2. Customers need to prepare for gas supply.

Heat Seal Tester is professionally applicable to the determination of heat-sealing temperature, dwelling time and the heat-sealing pressure which are references to the production of aseptic bag, food, pharmaceutical, daily chemicals, package and raw material. Features Micro-computer control tests. Touch interface is easier to operate. Self-innovated "constant temperature control" system improves the accuracy of temperature. The synchronous circuit of single bottom cylinder ensures the balance of pressure. Aluminum-sealing jaws provide even and uniform temperature for different sealing surfaces The upper and lower jaws controlling the temperature independently and the super-long thermal cover can meet different needs. Dual switch modes of manual and foot make the safety and convenience. Micro-printer embedded can get the results quickly. The design of anti-scald and leakage protection is more secure to test. Principle HST-H3 Heat-Seal Tester is composed of upper and lower heat sealing jaws. Before the test, preset the values of heat-sealing temperature, pressure and dwelling time, then place the specimen in between the upper and lower jaws and press start button. The whole sealing process can be finished automatically. Standards QB/T 2358, ASTM F2029, YBB 00122003. Applications Films with Smooth Surface Films with Decorative Pattern Surface Covers of Jelly Cups Plastic Flexible Tubes Technical Specifications Heat-Sealing Temperature Room temperature ~ 300 Accuracy of Temperature Control 0.2 Sealing Time 0.1999.9s Sealing Pressure 0.05MP-0.7MPa Sealing Area 330mm10mm (Customization is available) Heating Form Double heating (Optional: single heating) Air Pressure 0.05 MPa ~ 0.7MPa Air Connection 6mm PU tube Dimension 536 mm (L)335 mm (B)413 mm (H) Net Weight 40 kg

Gas Headspace Analyzer adopts a new handheld design and is equipped with advanced sensors, which can accurately and conveniently determine O2, CO2, N2 in sealed packaging bags, bottles, cans and other packaging containers. It can store the testing data in the device and transfer to the DK-190 software or third-party software. Effectively testing the atmosphere of the package is necessary steps of mass brand manufacturing. Features Testing data can be saved automatically. Portable design is suitable for test on production lines. The testing data can be transported to the DK-190 software or the third-party software. The protective cover of the sampler needle assured the testing safety. The built-in storage of data can reach 1500 pieces , which can meet the needs of large amount. Color display with touching function. It can be used for measurement of oxygen or combination of oxygen and carbon dioxide. The minimum volume of sampling gas is 3 ml. Data can be transmitted through Ethernet and USB. Optional wireless micro-printer. Principle The gas is transported to the embedded sensor which calculate the proportion of O2 and CO2 via the exported signal, the test is stopped when the required condition is reached. Standards This test instrument conforms to many national and international standards: ISO 15105-1, ISO 2556, ASTM D1434, JIS K7126-1, GB/T 1038-2000, YBB 00082003. Applications Packaging Bags Test the volume of O2 and CO2 (optional) in headspace of non-vacuum sealed packaging bags of coffee, cheese, milk tea, milk powder, bread, bean powder, instant food and drugs, etc. Packaging Containers Test the volume of O2 and CO2 (optional) in headspace of packaging containers of coffee, milk powder, food, cheese, can, Tetra Pak and beverage, etc. Technical Specifications Testable Gas O2 (Standard) CO2 (Optional) Test Principle Electrochemistry Infra-red absorption Life of Sensor 2 years (In air) >15 years Specification of Sensor 0-100% Resolution 0.01 % Accuracy ±0.2% ± (0.03% reading value *5%) Sampling Volume 3ml (Standard Mode) Dimension 230mm (L) 120mm (W) 82mm (H) Power Supply 220V AC ± 10% 50Hz 120V AC ± 10% 60Hz Net Weight 1 kg Configurations Standard: Instrument, Sampling needle, Filter, Sealing gasket Optional: Wireless printer, DK-190PC Professional Software, Device for testing ampoule, Standard portable bag

Water Vapor Permeability Tester is manufactured based on the gravimetric method, and is applicable to test the water vapor transmission rate of plastic films, composite films, sheets and other materials used in packaging, medical and constructive industry. Features Standard periodic weighing method and auto-zeroing function guarantee the accuracy and uniformity of the testing data. Touch interface is more convenient to operate. The test data is reliable due to the automatic process and the weighing system controlled by the gas cylinder. Innovative circulating dehumidification system with built-in vacuum pump can effectively prevent the formation of humidity gradient and ensure the accuracy. High-precise and automatic control system of temperature can be used under different conditions. The data can be stored and outputted in multi-format (including report in excel and cloud sharing). The rapid calibration mode with standard weight-counter is provided. GMP management of user's three-level authority complies with international standard. The instrument processes statistical analysis of single and group data. Equipped with ISP control online and upgrade function. Specialized communicating software can display in real-time, analyze and store data. Principle Under a certain temperature, the constant difference of humidity is generated between two sides of the test specimen. The water vapor permeates through the specimen and gets into the dry side. By measuring the weighing changes of the test dish in different time, water vapor transmission rate and other parameters can be obtained. Standards ISO 2528, ASTM E96, ASTM D1653, TAPPI T464, DIN 53122-1, JIS Z0208, GB/T 1037, GB/T 16928, YBB 00092003. Technical Specifications Test Range 0.01 ~ 10,000 g/m²24h (Standard) Number of Specimen 1 pc (One chamber) Accuracy 0.01 g/m²24h Resolution 0.0001 g Range of Temperature 15 ~ 65 (Standard) Accuracy of Temperature ±0.5 Range of Humidity 10%RH ~ 98%RH (Standard 90%RH) Accuracy of Humidity ±1%RH Velocity 0.5 ~ 2.5 m/s (Customization is available) Test Area 33.18 cm² Sample's Thickness  3 mm (Customization is available) Sample's  Size 74 mm Air Connection 6mm PU Tubing Dimension 440 mm (L) 450 mm (W)  450 mm (H) Power Supply AC 220V 50Hz Net Weight 42 kg

Gas Permeability Tester is based on the differential pressure method and is professionally applicable to the determination of gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, composite films, high barrier materials, sheeting, metal foils, rubber, tires and permeable membranes. Features The touch interface is auto-visual and easy to operate. Pneumatic clamping improves sealing and avoids manual error. Fully automatic process and the gas permeability, solubility coefficient and diffusion coefficient of the sample can be measured at the same time. Three kinds of test mode (proportion, material and time) are getting to meet different requirements. Provided standard membrane for rapid calibration to ensure the accuracy of testing data. Widely test under various conditions with high-precise temperature and humidity control (optional). The testing range can be expanded to meet the requirements of high transmittance test in accordance with clients' demand (can be modified). Supporting the testing of toxic gas, flammable and explosive gas (can be modified). Complied with GMP users' three-level authority. Systematical analysis of testing results can be carried out. ISP online control and upgrade function are excellent and testing function can be changed remotely according to requirements. Specialized software is used for real-time testing display, data analysis and storage. Principle The pre-conditioned specimen is mounted in the gas diffusion cell as to form a sealed barrier between two chambers. The lower-pressure chamber is firstly evacuated, followed by the evacuation of the entire cell. A flow of gas is thereafter introduced into the evacuated higher-pressure chamber and a constant pressure difference is generated between two chambers. The gas permeates through the specimen from the higher pressure side into the lower side. The gas permeability and other barrier properties of the specimen can be obtained by monitoring the pressure changes in the lower chamber. Standards ISO 15105-1, ISO 2556, ASTM D1434, JIS K7126-1, GB/T 1038-2000, YBB 00082003. Configurations Standard: Instrument, Professional Software, Round Sample Cutter, Vacuum Grease, Fast Quantitative Filter Paper and Vacuum Pump. Optional: Blades for Sample Cutter, Vacuum Grease, Vacuum Pump Oil, Fast Quantitative Filter Paper, Humidity Generator. Note: 1. The air connection of the instrument is 6 mm PU Tube. 2. Customers need to prepare for air source and distilled water.