BT ETA TORQUE - Dynamometric Torque Bottle DESIGNED TO BE INSTALLED UNDER CAPPING HEADS AT2E’s BT ETA TORQUE is built in with special mechanism permitting to avoid top load influence on measurement. It’s also built in a high speed electronic reading of measurements. Device can be custom-made according to different bottle or can profile. Using with our BT ETA Measure software, it’s very convenient for users to save, manage and analyse the data. Technical specifications: • Digital display • Measures in opening and closing directions • Measuring range: 00.00 to 60.00 Kgf.cm • 2 Measuring modes (continue, peak) • Units: Kgf.cm / Inch.lbs / N.m / N.cm • Accuracy: ? 0.5 % of full scale • Loading by USB (PC) • Delivered with COFRAC certificate • Transport case • 110/230 V - 50/60 Hz • Save up to 24 groups of data or 120 seconds of continued data.
BT ETA FORCE - Dynamometric Force Bottle DESIGNED TO BE INSTALLED UNDER CAPPING HEAD - SCREW CAP -PILFER PROOF - SECURE CHILD AT2E’s BT ETA FORCE includes a special mechanical design permitting to avoid all influence from non-coaxial efforts. It’s also built in a high speed electronic reading of measurements. Device can be custom-made according to different bottle or can profile. Using with our BT ETA Measure software, it’s very convenient for users to save, manage and analyse the data Technical specifications: • Digital display • Measures compression (top load) • Measuring range: 000.0 to 300.0 Kgf • 2 Measuring modes (mean, peak) • Units: Kgf / lbf / N • 0.5 % of full scale • Loading by USB (PC) • Delivered with COFRAC certificate • Transport case • 110/230 V - 50/60 Hz • Save up to 24 groups of data or 120 seconds of continued data. Mechanical specifications: • Designed on customers’ sample drawings • Built-in battery 3H • Dimensions: Customized • Size range: Minimum diameter 35 mm / Minimum height 60mm • Weight: 1-2 kg Using: • Ready to be installed on line after filling machine • Enables to control capping heads in real conditions (speed and top load) • Interchangeable formats
DYNA-4000 Dynamometer - Maximum top load tester for PET bottles & Cans The DYNA-4000 is an instrument for testing the top load resistance ability on PET bottles or cans. Designed for easy operation and maintenance, and fully conform to tests requirements according to international standards. The pressure test of containers is made up to a predefined pressure point (trial test) or until destruction. Characteristics: PLC integrated User defined test cycle (up to 4 steps of force and holding time) satisfies different test request Full Stainless steel and aluminum machine Various safety design RS232C output Touch screen LCD Dynamic display: statistics / hour / date Display: product name / operator / batch N° / sample N° Can store 10 operators and 30 products User defines the batch number and sample number Review the real-time testing graph
AT2E CO2DA - Digital Automatic Shaker & Calculator is a special instrument which is for calculating the carbon dioxide content in the filled drink in glass/PET bottles and cans. The simple operation which also guarantees high reproducibility makes it become a significant equipment of quality control in the beverage industry. Operation: • Putting the sample drink in the protection drum • Piercing the sample • Start the rotation • Obtain the carbon dioxide content after shaking The even rotation of sample provides optimum release of the dissolved carbon dioxide and it’s also the basis for the excellent reproducibility of the accurate measurement results.
HWBC-1 Hot Wire Bottle Cutter - For PET bottle section weight analysis The HWBC-1 Hot Wire Bottle Cutter offers an easy and cost saving way for cutting containers for section weight analysis. A clean section without deformation will be obtained by a quick cutting of bottles through heated hot wires. A precision and repeatable cutting task is easy to achieve and it’s necessary for a proper analysis. With HWBC-1, a PET bottle could be cut up to 5 predetermined sections, each section will be checked to ensure that it conforms to the exact weight assigned. Attributes: • Bottle cut with accuracy • Rapid warming the wires • Energy saving design • Up to 5 sections cut • Durable design • Easy to operate • Cutting up to 2 L bottle • Safety cover design which exhausts gases out of face of the operator (optional) • Excellent repeatability • Preheating Mode / Cut Mode (heating max)
CO2-CS Automatic CO2 Calculating System CO2-CS Automatic CO2 Calculating System is an innovative and full automatic CO2 content calculating system which is newly developed by AT2E. Features: Full automatic system – easy to get the CO2 content only by putting the sample into the system and the whole process including puncture, sealing, shaking, displaying and venting will be carried out automatically. Stainless steel design – which is more durable and steady when testing. Innovative shaking method – Allows the shaking of sample and the CO2 evolution to be more complete, so that the measure result is more accurate. Meanwhile, because of the innovative design, it avoids any mechanical maintenance problems which may occur on typical rotary shaker. Safety design – all the shaking process is carried out inside the chamber which may avoid the potential danger to operator. PLC & Touch screen is equipped – which enable the more accurate measure and customized measure request. Shaking time and shaking speed can be set according to operator’s demand. Abundant information – operator, product name, batch number and sample number can be edited and saved with the system. 2 formula – for alcohol drink and soft drink, 2 different CO2 calculating formula could be selected as per demand. Threshold display – results which are higher and lower than the standard will be displayed. SPC connected is available. Technical specifications: Power supply: 230V/50Hz Sample range: up to 120mm in diameter / up to 360mm in height. CO2 measuring range: 0 – 9.99 g/L. Temperature measuring range: -10 to 60 °C Pressure measuring range: 0 – 60 bar. Accuracy: ±0.01 g/L (CO2), ±0.1 °C (temperature), ±0.01 bar (pressure). CO2 content units: “g/L”, “Volume”, “Weight%” and “P20[kg/cm2]”. Temperature units: °F and °C Language: English / French / Spanish / Chinese. Dimension: 117.5x42x69.5 cm. Net weight: 75 kg.
Supplier: Ethanol /alcohol process line/machine,ethanol/alcohol turnkey project , industry fruit process machine/production line ,industry vegetable process machine/production line, industry noodle machine/production line , industry bread/cake machine/process line and so on . industry waste water treatment system process line .packing machine
Services: Our company's products, technical support, training, installation and commissioning
Commodity: Sodium Hydrosulfite Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate CAS No.: 7775-14-6 Molecular Weight: 174.10 Chemical Formula: Na2S2O4 Product Description Appearance: White, crystalline powder. Product Feature Odor: Slight irritative. Specific Gravity: Unavailable Solubility: Soluble in water. Density: 2.19 pH: 6-7 pH Test-Method: PH test paper. % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: >300 C Decomposes. Vapor Pressure (mm Hg): No information found. Bulk Density: ~0.9 Evaporation Rate (BuAc=1): No information found. Application 1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching . 2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps. 3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products, 4. in mineral, the compound of thiourea and other sulphides. 5. as reducing agent in chemical industry. 6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms. Packaging 50kg/100kg net in iron drums with double PVC bags Product Specification/Models NDEX 90%, 88%, 85%. FOOD ADDITIVE Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal calculated as Pb, 1ppm Water Insolubles05% Shelf Life(month)12
Commodity: Sodium Bisulfite Molecular Formula: NaHSO3 Molecular Weight: 104.06 Properties: White monoclinic crystalline powder with sulfur dioxide odor; relative density: 1.49; very easily soluble in water; can be decomposed when heated; slightly soluble in ethanol; aqueous solution is acidic; has strong reducing property; can be oxidized in the air or loose sulfur dioxide. Quality Standard: HG/T3492-80 Technical Indicator High-purity grade Acrylic grade Food grade Refined grade Industrial grade 1 NaHSO3 % 99.5 Insol. in water % 0.003, 0.005, 0.03, 0.04, 0.05 Chloride(Cl) % 0.003, 0.004 Iron(Fe) % 0.001 0.002 0.005 Heavy metal(Pb) 0.001 Arsenic(As) % 0.0001 Clarity test Qualified Use: It is used in the bleaching of cotton textiles; as reducing agent in dyes, paper-making, leather, chemical synthesis; in the manufacture of pharmaceutical intermediates, developer, food bleacher, antiseptic and anti-oxidants. Packing: In PP woven bag lined with PE bag; paper-plastic composite bag, and kraft paper bag etc. Net wt.: 25/50/1000 kgs/bag or upon clients' request.
