Full Bore Retrievable Packer

The lightweight Lubricators enable the wireline tool string to be introduced or retrieved from a well bore under pressure. The lubricator can be used singly also can use multiply according to the requirement of the oilfield operation, but the seal control head always be assembled on the top of the lubricator. Single Lubricator is 0.8-3m, the number of lubricator and total length could be decided by operation. Titanium alloy Lubricator is much better quality and lightweight than normal steel materials. The lightweight Lubricators usually consists of four basic parts: a quick union collar, a male quick union, a lubricator tube, and a female quick union. 1. Length of the Lubricator Riser could be customized according to working condition. 2. Drilling fluid, frac acidizing fluid, oil, gas and water can be working media. 3. Connection end of the Lubricator Riser could be flange or union. 4. Our Lubricator Riser is designed and manufactured according to API 16A.

Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. options: The TIS lubricator and riser section range is available with the following options : 3" ID to 9" ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 �°C Choice of quick union or API flanged connections Choice of bleed port connections -

Full onshore and offshore oil field and oil rig equipments. Our products include but not limited to: Drilling Pressure Control Equipment's Blowout preventors (BOPs) Rams and ram packers Connectors ESG system Capping stack Riser system Diverters BOP controls and monitoring systems Manifold systems Valves Drilling Equipment's: HMI and controls systems OnTrack system Drawworks Equipment Top drive systems Vertical pipe handling systems Horizontal pipe handling systems Pipe deck crane Drillfloor pipe handling equipment Hydraulic roughnecks Drillfloor tools Cellar deck equipment Stab-in connection system Hydraulic power units Motion compensation equipment Drilling derricks Well intervention packages Total Drilling Fluids Solutions: Mud control system Mud mixing system Bulk storage and transfer system Mud treatment system Low-pressure system Mud modules Containerized solutions Other equipment's: Shale Shakers Degassers Mud Cleaners Sand Pumps Stabbing Guides

Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. options: The lubricator and riser section range is available with the following options : 3.00â??ID to 9.00â?? ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 �°C Choice of quick union or API flanged connections Choice of bleed port connections Technical Features: On conventional lubricators, the component parts are screwed together by means of a special TIS acme connection, which has a primary o-ring seal and secondary metal to metal seal On integral type lubricators, the quick union collars can be very quickly and easily removed for cleaning, inspection, etc Integral lubricator sections can also be provided with an optional full re-cut facility on quick union connections.

The Lake Fishing Magnet is a junk retrieval tool designed to effectively remove metal particles, shavings, and debris from the bottom of the well bore. The process of retrieving small, oddly shaped objects is one of the most frequent and most difficult fishing jobs. Typically, these objects are the result of bit failures that leave cones and cutters in the hole, or are an accumulation of mill cuttings, or are simply accidental droppings of unmillable objects into the hole. In these cases, the fish is nearly always an odd-shaped object that cannot be engaged in the normal manner. Fishing magnets successfully remove these small objects from the hole bottom. The tool's design incorporates generous circulation holes that wash away the cuttings and other debris that other wise would prevent contact with the magnet. Fishing magnets can be run on either wire line or pipe.

Gate valves(ball screw operation) The ball-screw operation gate valve was developed for large-bore applications, to provide manual operation at full working pressure with remakably low opening torque.The design eliminates the need for gear-type torque multipliers, and results in quicker, safer operations. The ball-screw operation gate valve shares the basic features of the "ls"series:a slab gate, patented seat seal, non-elastomeric stem seals, and metal-to-metal sealing.However, the ball-screw operation gate valve has a lower balancing stem and unique ball screw mechanism Size:3-1/16", 4-1/16", 5-1/8", 7-1/16" Wp:10, 000psi, 15, 000psi Temperature:l u, pu Mat's:aa-ff psl:1-4 pr:1-2 Honorary certificate Our products have been iso9001 certified and attained api 6a, 6d, api 7, 7k, and api 16a&16c approvals of american pertroleum insitute.All products are fully designed and manufactured in accordance with api, ansi, gb(national standards)and sy(industry standards)standards.