The electric wire rope hoist model cd1 and md1 have the features of compact, light, small-sized shape and smooth operation. It can be used not only in the overhead rails, but also in conjunction with many types of electric or manual cranes such as the single-girder crane, the double-girder crane the cantilever crane and the gantry crane. The electric hoist modle md1 with double lifting speeds should be used in cases where the hoist model cd1 with sigle speed cannot meet the requirements for fine adjustments during precision operations.
The CD1, MD1 electric wire rope hoist is one kind of small light crane equipment, mainly structures include speed reducer, travelling mechanism, coiling block, hook, coupling, Soft cable current introducer & limiter. It uses the taper rotor motor, which contains the driving force and braking force. The electric block has the features of compact, light, small-sized shape and smooth operation, it is the necessary crane machinery for the industrial & mining enterprise, storage, wharf and cargo lift producing occasion. It can be mounted on overhead I beam independently and also can be used with electric & manual single beam, double beam, and cantilever & gantry cranes together as a complete set.
The electric wire rope hoist model cd1 and md1 have the features of compact, light, small-sized shape and smooth operation. It can be used not only in the overhead rails, but also in conjunction with many types of electric or manual cranes such as the single-girder crane, the double-girder crane the cantilever crane and the gantry crane. The electric hoist modle md1 with double lifting speeds should be used in cases where the hoist model cd1 with sigle speed cannot meet the requirements for fine adjustments during precision operations.
Supplier: Chain hoist:HSZ, HSC, HS-VT, lever block:HSH, chain:G80 chain, load chain, hand chain, electric wire rope hoist: CD1, MD1, electric endless chain hoist, trolley, pulley, lifting equipment
Electric hoist(CD Model) CD model wire-rope electric hoist is a kind of light-small lifting equipment with advantages of tight structure, light weight, small volume, wide common use and convenient operation etc.If reducers with hard gear surface are applied, it will have long life and high mechanical efficiency. Conic rotor brake motors are equipped which has safety limiter in both up and down directions. CD model wire-rope electric hoists can be widely used to hoist heavy objects, or installed on the straight or curve I-steel beam of Single-girder Cranes. They can also be used together with Electric Hoist Double-beam, gantry crane and slewing cranes. All the above has made the electric hoists common in industrial and ore enterprises, railway, wharfs and warehouses. High quality wood box.
Taking the advantage of first-class engineers, the most advanced chain making machines from Germany and the up-date manufacturing technology from Japan, we always guarantee our design and quality control following the step of times and enhance the share of international market, that is the reason why our corp can smoothly obtain the approval of ISO9002 in 1999, as well as CE approval later on, also it can explain why we are the first and only one that successfully get the Germany certificate of GS for hoists in China.
Electric hoists Jhss wire rope pulling hoist specification Item rx-800 rx-1600 rx-3200 Rated capacity(t) 0.8 1.6 3.2 Rated forward hangpower(n)_284 _412 _441 Rated forward trave (mm)52 55 28 Rope diameter(mm) 8.3 1116 Net weight(kg) 6 1122 Rx-800 max overalll size: 426*235*64 Rx-1600 max overalll size: 545*280*97 Rx-3200 max overalll size: 660*325*116
Single girder overhead crane description Single girder overhead crane runs on an elevated runway system along the length of a factory, the hoist moves the load up and down, and the bridge of the crane moves the load forward and backward. It is characterized by more reasonable structure and higher strength steel as a whole, the main beam and end carriage are made by U-section steel plate. It is used together with CD1/MD1 model or HC/HM model wire rope electric hoist as a complete set. Widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive to corrosives environment. Single girder overhead crane classification LDA type single girder overhead crane * It is widely used in warehouse, plant, material stock to lift the goods. * Capacity: 1ton-20ton * Span: 7.5m-28.5m * Lift height: 3m-30m * Working with CD1 OR MD1 electric hoist LX type single girder overhead crane * It is a light duty track traveling crane with railway, which applies to be used in the matching assembling site and warehouse. * Capacity: 0.5ton-10ton * Span: 6m-31.5m * Lifting height: 6m-18m * Working with CD1 or MD1 electric hoist LDP type single girder overhead crane * It belongs to very low clearance light duty equipment. * Electric hoist is at the side of the main girder, so it will increase service space of hook and reduce the cost, so it is widely used in the situation of low headroom workshop. * Capacity: 1ton-20ton * Span: 6m-31.5m * Lifting height: 6m-18m * Working with CD1 OR MD1 electric hoist European type single girder overhead crane * It compact lifting machinery designed and manufacturing in the strict according with FEM and DIN standard, which is advanced technology and beautiful design. * Capacity: 1ton-20ton * Span: 6m-31.5m * Lifting height: 6m-18m * Working with European type electric hoist * Electric Hoist 10 T Overhead Crane Workshop Bridge Crane Lifting System z
CD1/MD1 Model CD1, MD1 Electric Wire Hoist is a small-sized lifting equipment, which can be mounted on single beam, bridge, gantry and arm cranes With slight modification, it can also be used as a winch It is widely used in factories, mines, harbours, warehoused, cargo storange areas and shops, essential in raising working efficiency and imporving working conditions. Model CD1 Electric Hoist has only normal speed, which can satisfy normal application. Model MD1 Electric Hoist Provides two speeds: Normal speed and low speed. At a low speed, it can do precise loading and unloading, mounding of sand box, maintenance of machine tools, etc. Note: A. The standard lifting height is 6, 9, 12, 18, 24, 30 and 36 meters. B. The lifting speed can be single speed or double speed, even multi-speed with frequency inverters. C. The suitable rail for the low-headroon hoist is H-type rail, and l-type rail is also available. D. The recommended rope reeving of this kind of hoist is 2/1, 4/2 or 4/1. E. The normal travelling speed is 20m/min, and 12.5, 16, 25, 32m/min by request. F. The normal rial gauge of the double-girder hoist is 1200, 1500, 1800, 2100 and 2300mm. The mornal travelling speed of this kind of hoist is 20m/min, and 30, 45m/min by request Wooden case
Supplier: Single girder overhead cranes(ld models), double girder overhead cranes (lh, qd etc), gantry cranes(mh, mdg jib cranes(bz, qz, mz, frequency inverter cranes, explosion-proof series cranes(lb, qb etc), cranes with grab bucket, low headroom hoist, electric winches, construction cranes, clean room cranes and cd1 md1 hc electric hoist, hand chain hoist
