CD1/MD1
Model CD1, MD1 Electric Wire Hoist is a small-sized lifting equipment, which can be mounted on single beam, bridge, gantry and arm cranes
With slight modification, it can also be used as a winch It is widely used in factories, mines, harbours, warehoused, cargo storange areas and shops, essential in raising working efficiency and imporving working conditions.
Model CD1 Electric Hoist has only normal speed, which can satisfy normal application.
Model MD1 Electric Hoist Provides two speeds: Normal speed and low speed. At a low speed, it can do precise loading and unloading, mounding of sand box, maintenance of machine tools, etc.
Note:
A. The standard lifting height is 6, 9, 12, 18, 24, 30 and 36 meters.
B. The lifting speed can be single speed or double speed, even multi-speed with frequency inverters.
C. The suitable rail for the low-headroon hoist is H-type rail, and l-type rail is also available.
D. The recommended rope reeving of this kind of hoist is 2/1, 4/2 or 4/1.
E. The normal travelling speed is 20m/min, and 12.5, 16, 25, 32m/min by request.
F. The normal rial gauge of the double-girder hoist is 1200, 1500, 1800, 2100 and 2300mm. The mornal travelling speed of this kind of hoist is 20m/min, and 30, 45m/min by request
Wooden case
The CD1, MD1 electric wire rope hoist is one kind of small light crane equipment, mainly structures include speed reducer, travelling mechanism, coiling block, hook, coupling, Soft cable current introducer & limiter. It uses the taper rotor motor, which contains the driving force and braking force. The electric block has the features of compact, light, small-sized shape and smooth operation, it is the necessary crane machinery for the industrial & mining enterprise, storage, wharf and cargo lift producing occasion. It can be mounted on overhead I beam independently and also can be used with electric & manual single beam, double beam, and cantilever & gantry cranes together as a complete set.
Supplier: Chain hoist:HSZ, HSC, HS-VT, lever block:HSH, chain:G80 chain, load chain, hand chain, electric wire rope hoist: CD1, MD1, electric endless chain hoist, trolley, pulley, lifting equipment
The electric wire rope hoist model cd1 and md1 have the features of compact, light, small-sized shape and smooth operation. It can be used not only in the overhead rails, but also in conjunction with many types of electric or manual cranes such as the single-girder crane, the double-girder crane the cantilever crane and the gantry crane. The electric hoist modle md1 with double lifting speeds should be used in cases where the hoist model cd1 with sigle speed cannot meet the requirements for fine adjustments during precision operations.
The electric wire rope hoist model cd1 and md1 have the features of compact, light, small-sized shape and smooth operation. It can be used not only in the overhead rails, but also in conjunction with many types of electric or manual cranes such as the single-girder crane, the double-girder crane the cantilever crane and the gantry crane. The electric hoist modle md1 with double lifting speeds should be used in cases where the hoist model cd1 with sigle speed cannot meet the requirements for fine adjustments during precision operations.
Material q235b or q345b(similar as fe37 or fe52) End girder is welded with rectangular tubes or good steel. Main girders connected with bolts Trinity-drive system or traditional drive by motor and reducer Assembly and adjustment is rapid, simple Compact structure, small and light Special wheel, light , widely used Smoothly moving, effectively braking, long service life Choosing according to different needs 7.5-25.5 span
Supplier: HSZ chain blocks, CD1, MD1 electric blocks, HSH-a lever blocks, HSC chain blocks, single phase mini electric blocks, HSH-V lever blocks, HSZ-V chain blocks, PK loop chain electric blocks, DHK loop chain electric blocks, wire loop chain lever blocks, DHT loop chain electric blocks, stage electric blocks
Supplier: Single girder overhead cranes(ld models), double girder overhead cranes (lh, qd etc), gantry cranes(mh, mdg jib cranes(bz, qz, mz, frequency inverter cranes, explosion-proof series cranes(lb, qb etc), cranes with grab bucket, low headroom hoist, electric winches, construction cranes, clean room cranes and cd1 md1 hc electric hoist, hand chain hoist
LDA type crane is designed basing on LD type.LDA type crane has reasonable structure and strong nigdity.CD1 and MD1 hoist are used together with this type of crane which is on ligth duty.The electric hoist runs along the lower flange of the l-steel of the girder to accomplish article hoisting.It features light structure and easy installation and maintenance. Lift capacity: 0.5- 50t Span: 6-30m Lift height: 3-30m LDA Single Girder EOT Crane match with the CD1/MD1 type Electric wire rope hoist. Which is the most popular use crane machinery on the market at present.
LD model single beam overhead crane is characterized by more reasonable structure and higher strength steel as a whole, the box frame main beam and end carriage are made by U-section steel. This single beam overhead crane is used together with CD1/MD1 model wire rope electric hoist or HC/HM model wire rope electric hoist as a complete set, It is light duty class crane, the capacity from 1 to 30 tons. The span from 7.5m to 35m, the working grade are A3 and A4. Working temperature within -25 to +40 centigrade. This single beam overhead crane is widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipmenmt in the combustible, explosive to corrosives environment. The control models are pendant pushbutton control, wireless remote control and cabin control for choice.
