The electric wire rope hoist model cd1 and md1 have the features of compact, light, small-sized shape and smooth operation. It can be used not only in the overhead rails, but also in conjunction with many types of electric or manual cranes such as the single-girder crane, the double-girder crane the cantilever crane and the gantry crane. The electric hoist modle md1 with double lifting speeds should be used in cases where the hoist model cd1 with sigle speed cannot meet the requirements for fine adjustments during precision operations.
The CD1, MD1 electric wire rope hoist is one kind of small light crane equipment, mainly structures include speed reducer, travelling mechanism, coiling block, hook, coupling, Soft cable current introducer & limiter. It uses the taper rotor motor, which contains the driving force and braking force. The electric block has the features of compact, light, small-sized shape and smooth operation, it is the necessary crane machinery for the industrial & mining enterprise, storage, wharf and cargo lift producing occasion. It can be mounted on overhead I beam independently and also can be used with electric & manual single beam, double beam, and cantilever & gantry cranes together as a complete set.
Material q235b or q345b(similar as fe37 or fe52) End girder is welded with rectangular tubes or good steel. Main girders connected with bolts Trinity-drive system or traditional drive by motor and reducer Assembly and adjustment is rapid, simple Compact structure, small and light Special wheel, light , widely used Smoothly moving, effectively braking, long service life Choosing according to different needs 7.5-25.5 span
Supplier: Chain hoist:HSZ, HSC, HS-VT, lever block:HSH, chain:G80 chain, load chain, hand chain, electric wire rope hoist: CD1, MD1, electric endless chain hoist, trolley, pulley, lifting equipment
Electric hoist(CD Model) CD model wire-rope electric hoist is a kind of light-small lifting equipment with advantages of tight structure, light weight, small volume, wide common use and convenient operation etc.If reducers with hard gear surface are applied, it will have long life and high mechanical efficiency. Conic rotor brake motors are equipped which has safety limiter in both up and down directions. CD model wire-rope electric hoists can be widely used to hoist heavy objects, or installed on the straight or curve I-steel beam of Single-girder Cranes. They can also be used together with Electric Hoist Double-beam, gantry crane and slewing cranes. All the above has made the electric hoists common in industrial and ore enterprises, railway, wharfs and warehouses. High quality wood box.
Taking the advantage of first-class engineers, the most advanced chain making machines from Germany and the up-date manufacturing technology from Japan, we always guarantee our design and quality control following the step of times and enhance the share of international market, that is the reason why our corp can smoothly obtain the approval of ISO9002 in 1999, as well as CE approval later on, also it can explain why we are the first and only one that successfully get the Germany certificate of GS for hoists in China.
Electric hoists Jhss wire rope pulling hoist specification Item rx-800 rx-1600 rx-3200 Rated capacity(t) 0.8 1.6 3.2 Rated forward hangpower(n)_284 _412 _441 Rated forward trave (mm)52 55 28 Rope diameter(mm) 8.3 1116 Net weight(kg) 6 1122 Rx-800 max overalll size: 426*235*64 Rx-1600 max overalll size: 545*280*97 Rx-3200 max overalll size: 660*325*116
CD1/MD1 Model CD1, MD1 Electric Wire Hoist is a small-sized lifting equipment, which can be mounted on single beam, bridge, gantry and arm cranes With slight modification, it can also be used as a winch It is widely used in factories, mines, harbours, warehoused, cargo storange areas and shops, essential in raising working efficiency and imporving working conditions. Model CD1 Electric Hoist has only normal speed, which can satisfy normal application. Model MD1 Electric Hoist Provides two speeds: Normal speed and low speed. At a low speed, it can do precise loading and unloading, mounding of sand box, maintenance of machine tools, etc. Note: A. The standard lifting height is 6, 9, 12, 18, 24, 30 and 36 meters. B. The lifting speed can be single speed or double speed, even multi-speed with frequency inverters. C. The suitable rail for the low-headroon hoist is H-type rail, and l-type rail is also available. D. The recommended rope reeving of this kind of hoist is 2/1, 4/2 or 4/1. E. The normal travelling speed is 20m/min, and 12.5, 16, 25, 32m/min by request. F. The normal rial gauge of the double-girder hoist is 1200, 1500, 1800, 2100 and 2300mm. The mornal travelling speed of this kind of hoist is 20m/min, and 30, 45m/min by request Wooden case
http://www.liftpand.com/micro-electric-hoist.html Liftpand electric hoist is designed and manufactured under International standard EN14492-2+A1/AC:2010. 1.100% Cooper Motor Winding in high electrical conductivity and insulativity 2.Premium forged hook capable of loads Meet EN517 3.Upper Limit Position in quick action 4.Casting Aluminum Alloy cover in wonderful heat dissipation 5.Disc brake cork Rubber in high hardness, high compressive strength, and anti-friction, anti-oil, and anti-water 6.#45 gears in high p
It is a small and medium-sized crane running on rails. Single girder is suitable for rated lifting weight of 1-20t, double girder is suitable for rated lifting weight of 1 to 50t, applicable span is 12-30 meters, working environment is within -20 -+ 40 This product is a general-purpose crane, which is mostly used for loading and unloading or grabbing materials in open spaces and warehouses.
