Pathfinder10 is drill rig for coring and drilling, . It can be built on different frames such as regular skid frame, wheel, truck and hydraulic crawler. It has hydraulic regulated spindle to control speed of rotation between 53 rpm to 897 rpm step less. The rotation head can be swung aside for hole cleaning or grouting equipment. Pathfinder10 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods. It has hydraulic jacks at the top of the feeding frame for stabilization.
Pathfinder10 has also optional accessories such as hydraulic mud mixer, water flow meter, hydraulic mud pump (140 lt/min), high torque, shock absorbent and second rod holder.
72 rpm181 rpm
Explorer60 is full hydraulic drill rig for coring and drilling for underground galleries and surface. It can be built in different frames such as regular skid frame, three wheel trailer and hydraulic crawlers narrow or wide. Explorer60 also can be built in different feed lengths for different purposes. It has hydraulic regulated spindle to control speed of rotation between 166 rpm to 1000 rpm step less. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer60 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods. For stabilization it has hydraulic jacks at the top of the feeding frame.
Explorer60 has also optional accessories such as larger wire line hoist, cathead or two step hydraulic water pump.
Explorer30 is the small hydraulic drill rig for coring and drilling for narrow tunnels, underground galleries and surface. It has small built so that easy to install and carry. It has hydraulic regulated spindle to control speed of rotation between 350 rpm to 2200 rpm step less. It can be operated with one person. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer30 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods.
Rocker34 wagon drill rig
Rocker34 is designed for drilling blast holes with dth hammer. Rocker34 has crawler for the difficult ground conditions, strong construction, easy maneuver capability.
MAST AND FEED SYSTEMFeed Length4,1 m13 ft
Feeding Force0 - 27 kN
Pulling Force47,5 kN
Drilling Angle22° - 90°
POWER UNITBrandDEUTZ
TypeF4L912
Number of Cylinder4 cylinders
Cylinder Volume3,7 lt
Power51 kW - 70 Hp
Rev.2300 rpm
Engine TypeDiesel
CoolerAir
HYDRAULIC SYSTEMFirst Pump160 bar27 cc /rev.
Second Pump130 bar19 cc / rev.
Auxiliary Pump180 bar19 cc / rev.
Hydraulic Oil CoolerAir2024 K - 0,110 kW - 12 V
ROTARY UNITSpeed133 rpm
Toruque1185 Nm
SUPPORT JACKSMovement UnitTrack / max speed 2,9 km/h
Leverages of Jacks2 units of Hydraulic Leverages
Cylinder Stroke150 mm
m
Weight2.830 kg
ADVANTAGES
Vdd5 wagon drill rig (rubber whell driller)
Technical characteristics
General information
Engine38 kw
Weight2180 kg
Feed frame
Length5, 00 m
Stroke4, 10 m
Push force0 - 25 kn
Pull force50 kn
Drilling
Drill speed0 - 120 cm/min (it may change due to ground.)
Drilling diameter2, 5'' - 4'' / 63 mm - 102 mm
Drilling depth50 m
Rotation unit
Drive engine75 rpm
Torque1000 nm
Oil cooler2024k – 0, 110kw – 12v
Fuel tank capacity70 liters
Oil tank capacity250 liters
Advantages
Vdd5 has hydraulic pull and push force.
Vdd5 works with dth hammer.
Vdd5 is moving with 3 wheel hydraulic traction.
Vdd5 can be controlled with electrical joystick.
Three wheel traction system of vdd 5 can be chosen as demanded. (only front, only back or free)
Vdd5 is manufactured with high quality materials to maintain power and lifetime.
Vdd5 provides easier and faster drilling with enhanced pull and push force and rotation.
Vdd5 has a large volume of oil tank and oil cooler; therefore, the oil is used more efficient and long time.
Vdd5 can drill 76, 89, and 100 mm of hole sizes.
Vdd5 can drill with giving from 22 degrees to 90 degrees of drilling position.
Vdd5's drilling vibration is minimized with the help of balancing pistons.
Özanadolu sitesi 682. Sokak no: 25-27 Ývogsan-ankara-turkey tel: +90 312 394 47 24 faks: +90 312 395 62 07