This kind of elevator can work normally in the shocking condition.It can also work under the adverse condition of temperature from -20¡æ to 50, the 100% max relative humidity and the max wind speed of 25/s.Port elevator can be installed and operate on damp sea surface in salt mist and quite adverse environment.As a result, the control system and the structure must be designed well.
Applicable to:good resistant to moisture, salt mist, oil mist and dust.Enhance reliability and life span of the elevator.
Supplier: Forklifts, port cranes, crane elevators
Buyer: Kitchen equipment (exotic snacks), convertible to 220V pumps, protective work gear, masks, rigger boots
Bucket Elevator Product Introduction: A bucket elevator is a fixed mechanical conveying equipment mainly suitable for continuous vertical lifting of powdered, granular, and small materials. It can be widely used for lifting loose materials in various scale feed factories, flour mills, rice mills, oil mills, starch factories, grain depots, port terminals, etc. The bucket elevator is used to vertically lift block and granular materials such as limestone, coal, gypsum, clinker, dry clay, as well as powdered materials such as raw materials, cement, and coal powder that pass through the crusher. According to the different operating speeds of the hopper, bucket elevators can be divided into three forms: centrifugal discharge, gravity discharge, and mixed discharge. The centrifugal unloading hopper has a fast speed and is suitable for conveying materials with small grinding properties such as powder, granular, and small pieces; Gravity discharge has a slower bucket speed and is suitable for conveying bulk, high density, and high grindability materials, such as limestone and clinker. The traction components of a bucket elevator include ring chains, plate chains, and tape. The structure and manufacturing of the ring chain are relatively simple, and the connection with the hopper is also very strong. When conveying materials with high grinding properties, the wear of the chain is relatively small, but its own weight is relatively large. The plate chain structure is relatively sturdy and lightweight, suitable for elevators with large lifting capacity. However, the hinge joint is prone to wear and tear, and the structure of the tape is relatively simple, but it is not suitable for conveying materials with high grinding properties. The temperature of ordinary tape materials does not exceed 60 , steel rope tape allows material temperature to reach 80 and the temperature of materials transported by ring chain and plate chain can reach 250 â??. Application: This series of bucket elevators is suitable for conveying powdery, granular, and small pieces of non abrasive and low abrasive materials, such as coal, cement, stones, sand, clay, ore, etc. Due to the traction mechanism of the elevator being a circular chain, it allows for the transportation of materials with higher temperatures (material temperature not exceeding 250 ). The general conveying height can reach up to 40 meters.
The following example is for you reference: 1.Description: Model CD side door elevators with square shoulder are suitable for handling tubings, casings, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and supplied according to API Spec 8A/8C Specification for drilling and production hoisting equipment. 2.Features (1).API certified products, national best quality. (2).Load capacity from 100ton to 750ton. (3).Easy to operation while well drilling. (4).100% NDT test for critical parts on the elevator. 3.Key words: CD side door elevator;drilling elevator;tubing elevator;casing elevator. 4.After-sales Service Provided:No overseas service provided. 5.Warranty:one year. 6.Certification:API 8A/8C. 7.Condition:New. 8.Material:Carbon Steel. 9.Processing Type:Casting. 10.Machine Type:Drilling Equipment. 11.Use:Well Drilling. 12.Processing Time:50days. 13.Supply Ability:5000sets/per year. 14Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: Model SX side door elevators with square shoulder are suitable for handling casings in oil drilling,natural gas drilling and well construction.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. 2.Key Words: Side Door Elevator, Drilling Elevator, SX Type Elevator. 3.After-sales Service Provided: No overseas service provided. 4.Warranty: one year. 5.Certificaiton: API 8A/8C. 6.Condition: New. 7.Color: Red. 8.Model: CDZ-150; CDZ-250; CDZ-350; CDZ-500. 9.Rated Capacity(short tons): 350~500. 10.Size(in): 7"~20". 11.Place of Origion: China(Mainland). 12.Minimun Order: 1Set(s). 13.Material: Carbon Steel. 14.Processing Type: Forging. 15.Machine Type: Drilling Equipment. 16.Use: Well Drilling. 17.Processing Time: 15days. 18.Supply Ability: 1000sets/per month. 19.Payment Terms: T/T; L/C; Western Union. 20.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: Model SLX side door elevators with square shoulder are suitable for handling tubings,casings,drill pipes and drill collars in oil drilling,natural gas drilling and well construction.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. 2.Key Words: Side Door Elevator, Drilling Elevator, SLX Type Elevator. 3.After-sales Service Provided: No overseas service provided. 4.Warranty: one year. 5.Certificaiton: API 8A/8C. 6.Condition: New. 7.Color: Red. 8.Model: SLX-65; SLX-100; SLX-150; SLX-250; SLX-350; SX-500. 9.Rated Capacity(short tons): 65~500. 10.Size(in): 3 1/2"~30". 11.Place of Origion: China(Mainland). 12.Minimun Order: 1Set(s). 13.Material: Carbon Steel. 14.Processing Type: Forging. 15.Machine Type: Drilling Tool. 16.Use: Well Drilling. 17.Processing Time: 15days. 18.Supply Ability: 500sets/per month. 19.Payment Terms: T/T; L/C; Western Union. 20.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with 18 degree taper and tools in oil and natural gas drilling, well construction.CDZ drill pipe elevators are forged from high quality alloy steel, heat-treated, and NDT tested. the rated loads range from 150t(1350kN) to 500t(4500kN), and cover pipe sizes from 2.3/8" to 5.1/2" O.D. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. 2.Key Words: CDZ type elevator, Drilling elevator, Side door elevator. 3.Features: (1).100% NDT test for critical parts for elevator. (2).Hydraulic test according to API 8C. (3).Load capacity from 150ton to 500ton. (4).Easy to operation while drilling, spare parts is available after sales. (5).Third party inspection is also available after sales. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 8A/8C. 7.Condition: New. 8.Color: Red. 9.Model: CDZ-150; CDZ-250; CDZ-350; CDZ-500. 10.Rated Capacity(short tons): 150~500. 11.Size(in): 2 3/8"~5 1/2". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 600sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: Air operated Elevators are conventional elevators to which power actuation has been added.This feature permits remote opening and closing of the elevators.It can meet normal working requirements in oil drilling & workover and also reduce workload.They are designed and manufactured according to the requirements in API Spec 8A/8C Specification for drilling and production hoisting equipment. 2.Key Words: Air-operated Elevator, Drilling Elevator,Conventional Elevator. 3.Features: (1).Air-driven type elevator,easy to operation. (2).Load capacity from 150~500ton. (3).API certified product with full NDT test. (4).Drilling site service available. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 8A/8C. 7.Condition: New. 8.Color: Red. 9.Model: DD-150; DDZ-500. 10.Rated Capacity(short tons): 150~500. 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Casting. 16.Machine Type: Handling Tools. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 1000sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: SP series auxiliary elevators are mainly used in handling single tubings,casings and drill pipes with taper shoulder.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. 2.Key Words: Sp Type Elevator, Single Joint Elevator, Auxiliary Elevator. 3.Features: (1).API 8C certified products with national best quality. (2).NDT test for elevator, to make no damage for elevator. (3).Easy to operation while well drilling. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 8A/8C. 7.Condition: New. 8.Color: Required. 9.Model: SP5°; SP12°; SP18°. 10.Rated Capacity(short tons): 5. 11.Rated Capacity(kN): 45. 12.Size(in): 2 3/8"~10 3/4". 13.Place of Origion: China(Mainland). 14.Minimun Order: 1Set(s). 15.Material: Carbon Steel. 16.Processing Type: Forging. 17.Machine Type: Drilling Tool. 18.Use: Well Drilling. 19.Processing Time: 30days. 20.Supply Ability: 300sets/per month. 21.Payment Terms: T/T; L/C; Western Union. 22.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
The following example is for you reference: 1.Description: DDZ series elevators are center latch elevators with 18 degree taper shoulder,applied in handling the drill pipes and drilling tools,etc.the load ranges from 100 tons to 750 tons and the size ranges from 2 3/8" to 6 5/8".It was design verification tested at more than two times the max,test load, and underwent ex-factory test at one and a half times the rated load.the products shall be designed and manufactured according to the requirements in API Spec 8A/8C Specification for drilling and production hoisting equipment. 2.Features: (1).Centralizer type elevator easy to operation. (2).100% NDT test, hydraulic test, Load capacity test according to API 8C. (3).Wear limit form provided for spare parts. (4).Load capacity from 100-750tons. (5).Short on deliver time. 3.Key Words: DDZ drilling elevator, Centralized elevator, Well drilling elevator. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 8A/8C. 7.Condition: New. 8.Color: Red. 9.Model: DDZ-100; DDZ-150; DDZ-250; DDZ-350; DDZ-350TD; DDZ-500; DDZ-500TD; DDZ-750. 10.Rated Capacity(short tons): 100~750. 11.Size(in): 2 3/8"~6 5/8". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 20days. 19.Supply Ability: 400sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.
