Special down-setting tractor and anti-swing design;
A door smooth movement compensated device is designed for the stretch of the wire rope and makes this elevator operate as the ordinary ones.It is suitable for many kinds of tower crane brand, such as potain, liebherr, jost and etc.
This tower elevator is special designed for the tower crane usage, through the crane elevator, the tower crane operator can reach the control cabin on the top of tower crane with safety, fast and more effective, so as to save the time and cost.
Home elevator are hot sale from our company.
1. Automatic operation: automatically open the door;automatic time-lapse closing;manual closing in advance.
2. Closing protection: if anyone enters into the elevator while the door is closing, it will stop closing to open again.
3. Full-load directional operation: when the elevator reaches the largest load, it will only respond to the instructions inside.
4. Energy-saving function: if no one uses the elevator during the setting time, the illumination and air blower in the car will turn off automatically and turn on with the instructions.
5. Non-stopping floor setting: the passenger can set the non-stopping floor according to his need.
6. Calling button diagnosing function: the system will ignore the floor-choosing instruction when the calling button of this floor is closed for a long time.
7. Hibernate function: when the elevator is not in use in the setting time, the monitor will hibernate to increase the lifespan
8. Intelligent operation(observation elevator): when the elevator is in use, the elevator will choose the best operation mode according to the passenger number and time.
01.Attendantless Operation:Automatically stop at leveling and open door,and automatically close door with time delay. In addition,manually close door before set-time of close door,automatically store interior floor selection and automatically respond external inturn calling.
02.Attendant Operation:Selection by driver,automatically open door when stop at leveling,and automatically store interior floor selection,automatically respond external in-turn calling,and manually close door.
03.Safety of Colse Door:When colse elevator door,if someone or goods are entered,the action of close door is stopped at once and open door again.
04.Overload Protection:If the load of elevator exceeds rated load,the overload indicating lamp will light and alarm is sounded.The elevator will not be run if the door is not closed.
05.Full Load by Pass:If load of elevator reach rated load,the elevator only responds interior call,and not respond external call from sanei observation elevator manufacturer
06.Function of Energy Saving:If the elevator is not operated,the illumination and fan inside car will be autoomatically turned off.They will be turned on qutomatically at once by instruction at any time.
07.Stop Nearby when Fault Occurs:If the fault occurs when elevator running in midway,the elevator will slowly run to nearest floor,stop at open-door zone and then automatically open car door.
08.Arrival Chime:when the elevator runs before stop at the floor,the clock will be sounded to remind passenger that the elevator will stop at the floor.
09.Emergency IIIumination of Car:If the power of illumination is broken,the emergency lamp inside car will be lighted automatically.
10.Auto Return to Landing:The elevator will automatically return to appointed landing if no internal or external calling signal.(the landing can be discretionarily set)
11.Auto Leveling when Power On:If elevator runs at non-door-zone when power is broken,the elevator will automatically reach the leveling position after power is on again.
12.Over-Speed Protection:When the running speed exceeds rated speed due to fault,the electrical and mechanical protection functions will be started to prevent car running from excess of up and down range.
13.Anti-Mischief Function:If exceeding 3 interior calling inside car when elevator load is below setting value,the system will delete all calling and re-select floor.
14.VIP Service Function:When elevator is at VIP service state,the calling inside car will be executed firstly to ensure quick arrival of passenger inside car.
15.Door Nudging with Buzzer:If the time of open door exceeds setting time,the system will close door compulsively and the close door protection function will be neglected temporally.
16.Internal Communication:If the elevator is in abnormal state,the persons in car,at car roof and bottorm pit can communicate with machine room or control room.
17.Inspection and Diagnosis for Faults:When fault occurs,the system of elevator can automatically diagnose the causation of fault,and store the information into systerm for maintenance personnel call.
18.Repeat Close Door:After executing instruction of closing door,if door lock circuit is not connected within specified time,the elevator will re-open the door and then re-close the door.
19.Parking Function:When service of elevator is stopped,any floor can be selected to park elevator.
20.Function of Auto Start and Stop Elevator:If no operator for elevator,auto start and stop elevator can be set based on requirement.
21.Elimination of Mis-Operation:If passenger select floor in error,the floor can be re-selected after eliminating mis-operation.
22.Setting any Non-Stop Floor:The user can set any temporary non-stop floor based on requirement.
23.Setting any Indicating Character of Floor:The user can set any indicating character of floor based on requirement.
24.Self-Diagnosis Function of Call Button:When the call button in some floor is on for long time,the system will neglect the call request of this floor.
25.Dormancy Function of Floor Display:If no one uses the elevator over setting time,the LCD will enter into dormancy state to raise the service life of LCD.
This kind of elevator can work normally in the shocking condition.It can also work under the adverse condition of temperature from -20¡æ to 50, the 100% max relative humidity and the max wind speed of 25/s.Port elevator can be installed and operate on damp sea surface in salt mist and quite adverse environment.As a result, the control system and the structure must be designed well.
Applicable to:good resistant to moisture, salt mist, oil mist and dust.Enhance reliability and life span of the elevator.
Unique signal connection
Unique double-string carrier transmission which can connect the signal inside the car with the control system and avoid the disadvantages of the slanting moving elevator on inclined elevator.Reliable signal transmission;low breakdown;no maintenance.
Imported intelligent gate opener
German imported intelligent gate opener with low breakdown.No connecting rod design which requires not too many decelerate switched;intelligent torque which ensures the opening and closing of the door more smooth, efficient and reliable.
Integrity of the signal inside the car
Dc high-performance no-maintenance accumulator helps the realization of the integrity of the signal inside the car; automatic charge to supplement energy.Inside the car, only two safe circuit related to the control system with the wire, an the illumination and ventilation inside the car are all supported by the accumulator.The emergency call is also be realized by the sound carrier technique.Choose the inclined elevator manufacturers to choose the professional.
Type: elevators place of origin: shanghai china (mainland) brand name: sanei
Model number: sn-525 usage: observation elevator drive type:traction machine
Elevator type: passenger elevators certification: iso9001-2000, ce, gost, jab traction machine: gearless or gear machine
Colour: customer requirement machine room:machine-room or machine-roomless power source: electric
Place of origin: shanghai, china capacity: 800kg, 1000kg, 1250kg car deciration:stainless steel hairline finish...
Drive system: vvvf observation elevator:observation elevator manufacturer.
