99% Alumina tiles with high hardness, low porosity is produced by unique forming, sintering processes. These tiles are combined with ultra high molecular weight Polyethylene into ballistic proof panels which are widely used in Human body and vehicle protection. Shooting tests showed our plates meet NIJ level III/IV stipulated by U.S. Standard NIJ 0101.06.
Ballistic ceramic: alumina, silicon carbide, boron carbide.
Supplier: Refractory bricks, high alumina bricks, fire clay bricks, sk 34 fire bricks, sk 36 fire bricks, acid resistance bricks,insulating bricks, hfk bricks, cfi bricks, special shaped refractory burner block, refractory tiles, refractory tundish well blocks, refractory nozzle, refractory castables, medium purity high purity castables, low cements castables, refractory mortar, refractory cements, ceramics fiber blankets, ceramics fiber boards, crushed refractory bed materials, bottom pouring sets
B4C ceramic with small density, high hardness, ultra high modulus and fracture toughness produced by our know-how is a new generation of light armor ceramic these tiles are combined with ultra high molecular weight polyethylene into anti-ballistic panels which are the ideal choice of human body, vehicle and armed helicopter protection. Shooting tests showed our plates meet nij level iii/iv stipulated by U.S. Standard NIj0101.06.
Silicon carbide tiles with less defects, high dense, hardness and good fracture toughness are produced by reaction bonded processes. SiC ceramic tiles combined with ultra high molecular weight Polyethylene into panels which are more and more used in human body and vehicle protection. Shooting tests showed our plates meet NIJ level III/IV stipulated by U.S. Standard NIJ0101.06.
Alumina ceramic grinding beads Specification: Chemical composition: Al2O3 92% Density (g/cm3): 3.65 Hardness (Mohs): 9 Size Available(mm): 0.5~10 Application: Wet grinding, ultrafine grinding process of ceramics, glaze, chemicals, etc.
(1) Introduction: The inert alumina ceramic ball is broadly utilized as the covering or supporting materials of the catalyst in the reactors and the packing in the columns in such varied areas, for example, petroleum, chemical industry, chemical fertilizer, natural gas, and environmental protection etc. There are lots of merits for it, for instance, the stronger resistance to high temperature and high pressure, lower ratio of the moisture absorbing, more stable chemical properties, and so on. It is capable of enduring the corrosion of acid, alkali, and organic solvent. In addition, it can also bear the rapid transitions of temperature during the operation. In fact, its principal functions are to accelerate the distribution of gas or liquid, and support or protect the active catalyst, which especially has the relevantly lower mechanical strength. This product, which had been developed by our group company, had gained the award of excellent new product and the prize of the science and technology improvement of Jiangxi province in 1988. In the same year, this product entered the national honor roll of the excellent new product. In 1990, it gained the national certificate of the science and technology achievements. In 1996, it also got the provincial certificate and the golden prize of the famous brand product. Of late years, it has always been recommended by SINOPEC. Since it entered the market, all circles of customers had realized that its properties and effects are the same as the foreign products, and some of the technological index has surpassed the same foreign products. (2) Main specifications and types: Specifications and allowable deviation of diameter¡¡ The product of other specifications can also be prepared according to customers' requirement. (3) Notice to ordering goods a) When ordering goods, customers should introduce the radical situations of the equipment, including the sizes of reactors, and the operational temperature etc. b) Customers should provide the specification, types, and the total content of Si, Al related to the required product. c) As the inert ceramic ball belongs to the natural tight stacking in the reactors, customers should consult with our technological staff to determine the amounts according to the practical loading volume, and remain 15-20% margins. (4) Product Standard Chemical Industry Standard HG/T 3683.1 - 2000 Industrial Ceramics Ball - Inert Ceramic ball. Doulble woven bag and palletized, 25kgs/bag, 40bags/pallet.
The technical ceramic alumina ball with the characteristics of high density,high hardness,low abrasion,good anti-seismic stability, corrosion resistanceis which can improve the ball milling efficiency of the ball mill, reduce the pollution of glaze slurry, improve the product quality and economic benefits of the enterprise that is made of selected high-quality raw materials, advanced molding technology and calcined in high-temperature tunnel kiln at 1600 �ºC. It is an ideal grinding medium for processing glazes, billets and various mineral powders. The technical ceramic alumina ball is used in the grinding process of ceramic glaze, including the grinding process of ball mill. The semi-finished glaze slurry after grinding by ball mill is put into the mixing mill for fine processing, so that it becomes glaze. Or put the glaze powder directly into the agitation mill for fine processing to make it into glaze. We can supply 65-70% alumina content classified as medium alumina ball, 75% - 80% alumina content called medium high alumina ball, and more than 90% alumina content is high alumina ball. Among them, the high alumina ball is subdivided into 90% porcelain, 92% porcelain, 95% porcelain and 99% porcelain.
FILTE AL Ceramic Foam Filters , These filters are used for pouring of Aluminium alloys into chills and into sand moulds , Alumina Ceramic Foam Filters are mainly used for filtration of aluminium and alloys in foundries and cast houses.
Specification: We are producing vavious custom Zirconia Ceramic Liner ceramic sleeve for pump which is high temperature resistant tubes . Zirconia Ceramic liner Ceramic Sleeve for pump have exceptional hardness and strength, resistance to chemical attack and wear, low dielectric loss and excellent electrical insulation properties. Additionally, Alumina can be metallized for brazing to other metals, highly polished, and comes in a variety of purities depending on it use. Due to these outstanding properties ceramic Alumina tubes are used in a wide range of industrial and advanced applications. Zirconia Ceramic Liner Ceramic Sleeve for pump exhibits high hardness, good abrasion resistance, high strength, and stability. These products are developed incorporating sophisticated technology and are made available to patrons at market leading prices. Zirconia Ceramic Liner ceramic sleeve for pump is a unique advanced ceramic. Products manufactured from alumina ceramic exhibit superior mechanical properties such as high strength and flexibility. Heat insulating properties and oxygen-ion conductivity indicate zirconia has potential for use in a wide variety of applications - everything from telecommunications to the new energy of the future and environmentally beneficial products. Depending on doping material different material properties could be achieved because of influencing the Yttria's microstructure. The "Ceramic Steel" titled Zirconia is doped with Yttria forming an ultra-fine ductile structure with sub-micron grain formation leading to enormous bending strengths. Magnesia doped qualities are less strong also showing a coarser microstructure. Advantages: 1. Excellent insulation, security, long working life. 2. High temperature resistance. 3. Resistance to electric breakdown. 4. Stand wear and tear. 5. High strength. 6. Corrosion resistance. 7. Good compactness. 8. HIgh hardness.
