Carbide Dies

Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments. Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer! we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11 Note: Other specification can be made upon customer's requirements.

Grade density hardness t.R.S( mpa) application Yg6 14.9 91.0 hra 2350 Yg8 14.7 89.5 hra 2350 All raw material are tested in terms of density, hardness and t.R.S before use. There are strict inspection on process and final products. Every batch of product can be traced

Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments. Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer! we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11 Note: Other specification can be made upon customer's requirements.---chengdu woco carbide

Tungsten Carbide Wear Parts Carbide Wire Guide Dies / Tube Guide For Extrusion Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire. Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels. Introduction of Carbide Wire Guides: High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC); Hot hardness (up to 900 ~ 1000 C, keeping 60HRC); Good wear resistance There are V-groove, R-groove, U-groove trough over other. V-groove with 90, 110 , 120 , and other specifications, R-groov ranging from R0.2 to R25. Diameter 500mm available.

Tungsten Carbide Wear Parts Carbide Wire Guide Dies / Tube Guide For Extrusion Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire. Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels. Introduction of Carbide Wire Guides: High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC); Hot hardness (up to 900 ~ 1000 �°C, keeping 60HRC); Good wear resistance There are V-groove, R-groove, U-groove trough over other. V-groove with 90, 110 , 120 , and other specifications, R-groov ranging from R0.2 to R25. Diameter 500mm available.

We company can manufacture tungsten carbide drawing dies according customers' requirements.

With more than 16 years experience of tool manufacturing in carbide and steel material for nail machines. In this period,we have gained a good knowledge of the machine types for which these tools are supplied, as well as the expertise to know which grade of carbide best suits each tool type. Tools for nail making machine are: Gripper dies Cutter dies header dies A set of shaped cutters strike the other end of the wire. This cutter forms the point of the nail and at the same time cut the nail from the rest of the wire. The gripper dies release and feed the wire forward for the next nail. The formed nails are then collected in bins. Gripper dies can be used for making nails from copper, stainless steel, aluminum, iron, zinc and many more. Gripper Dies are those dies which are used in making nails in fasteners industries

Tungsten carbide wire drawing dies, wire coating dies, pcd dies for drawing use for drawing various ferrous and nonferrous wires Tungsten carbide dies Tungsten carbide drawing dies Tungsten carbide nibs Tungsten carbide wire guide dies Pcd dies Both carbide dies nibs and finished products with steel case are supplied

We produce tungsten carbide drawing dies in various type such as R, W, S series, Grade YG6 and YG8, various sizes.