Carbide Wire Guide Dies

Tungsten Carbide Wear Parts Carbide Wire Guide Dies / Tube Guide For Extrusion Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire. Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels. Introduction of Carbide Wire Guides: High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC); Hot hardness (up to 900 ~ 1000 �°C, keeping 60HRC); Good wear resistance There are V-groove, R-groove, U-groove trough over other. V-groove with 90, 110 , 120 , and other specifications, R-groov ranging from R0.2 to R25. Diameter 500mm available.

With more than 16 years experience of manufacturing tungsten carbide dies for the metal working industry, For wire and bar drawing plant, uko has gained business partners from various direction with positive feedback. Wire guides can be supplied in the as sintered, ground or ground and polished condition. Non-standard guides are available upon request. Carbide wire guide dies including Tungsten carbide wire guides Tungsten carbide bush Carbide bunching and stranding dies Tungsten carbide straightener dies We make carbide wire guides which are used in spring manufacturing machines. We use good wear resistant grade carbide for these wire guides for wire cold form industry.

Tungsten carbide wire drawing dies, wire coating dies, pcd dies for drawing use for drawing various ferrous and nonferrous wires Tungsten carbide dies Tungsten carbide drawing dies Tungsten carbide nibs Tungsten carbide wire guide dies Pcd dies Both carbide dies nibs and finished products with steel case are supplied

Supplier: Tungsten carbide rolls, tungsten carbide wire drawing dyes, carbide wire guide dies, carbide nail tools

Supplier: Cemented carbide, tungsten carbide, wire drawing dies, rolling rings, guide rollers

Supplier: Tungsten carbide cold rolls, carbide descaling roller, carbide straightening roller, wire guide and straightening dies, carbide wire drawing dies, PCD dies, gripper dies & cutter, wear parts
Services: Manufacturer and exporter

Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments. Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer! we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11 Note: Other specification can be made upon customer's requirements.

Supplier: Tungsten carbide cold rolls, carbide descaling roller, carbide straightening roller, wire guide, straightening dies, carbide dies, PCD dies

Radifocus Guidewire M Standard type is a Nitinol hydrophilic guidewire covered with polyurethane containing tungsten and a hydrophilic polymer coating (M Coat) for complete, low friction maneuverability. Indicated for use for standard angiography in coronary and peripheral territories, catheterization, embolization, peripheral angioplasty and stenting (with or without an exchange wire), and subintimal angioplasty in small, standard or large proximal or distal vessels.