Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments.
Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer!
we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11
Note: Other specification can be made upon customer's requirements.
Tungsten Carbide Wear Parts Carbide Wire Guide Dies / Tube Guide For Extrusion Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire. Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels. Introduction of Carbide Wire Guides: High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC); Hot hardness (up to 900 ~ 1000 C, keeping 60HRC); Good wear resistance There are V-groove, R-groove, U-groove trough over other. V-groove with 90, 110 , 120 , and other specifications, R-groov ranging from R0.2 to R25. Diameter 500mm available.
Tungsten Carbide Wear Parts Carbide Wire Guide Dies / Tube Guide For Extrusion Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire. Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels. Introduction of Carbide Wire Guides: High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC); Hot hardness (up to 900 ~ 1000 �°C, keeping 60HRC); Good wear resistance There are V-groove, R-groove, U-groove trough over other. V-groove with 90, 110 , 120 , and other specifications, R-groov ranging from R0.2 to R25. Diameter 500mm available.
With more than 16 years experience of manufacturing tungsten carbide dies for the metal working industry, For wire and bar drawing plant, uko has gained business partners from various direction with positive feedback. Wire guides can be supplied in the as sintered, ground or ground and polished condition. Non-standard guides are available upon request. Carbide wire guide dies including Tungsten carbide wire guides Tungsten carbide bush Carbide bunching and stranding dies Tungsten carbide straightener dies We make carbide wire guides which are used in spring manufacturing machines. We use good wear resistant grade carbide for these wire guides for wire cold form industry.
Tungsten carbide wire drawing dies, wire coating dies, pcd dies for drawing use for drawing various ferrous and nonferrous wires Tungsten carbide dies Tungsten carbide drawing dies Tungsten carbide nibs Tungsten carbide wire guide dies Pcd dies Both carbide dies nibs and finished products with steel case are supplied
Supplier: Tungsten carbide rolls, tungsten carbide wire drawing dyes, carbide wire guide dies, carbide nail tools
Supplier: Tungsten carbide cold rolls, carbide descaling roller, carbide straightening roller, wire guide, straightening dies, carbide dies, PCD dies
Orgin of material:Japan ,Austria,China Material: Tungsten Carbide ,SKD11,SKH9,SKD51 Technique Standard: According to national standard GM,JIS,DIN,AISI ect,and other national standard to making Technique Advantage: precision carbide dies with dimension +/- 2¦Ì Utilization Scope: Precision die mould,precision computer connector mould,mould accessory Packaging detail:each in one box Delivery time:5-8 days Price Items: FOB SHANGHAI /DDU. Packaged according to customer's requirements.
1/ general introduction of tungsten carbide wire roller: With more than 16 years experience of manufacturing tungsten carbide rollers for the metal working industry, For wire and bar drawing plant, uko has gained business partners from various direction with positive feedback. Tungsten carbide wire roller including Descaling roller Stress reliving roller Straightening roller Guide roller 2/reference size and application of tungsten carbide wire rodller: Descaling rolls are made of tungsten carbide or steel and are used for the mechanical descaling of entry rod in reduction mills. Stress relieving rolls are made of tungsten carbide to improve the mechanical characteristics of the cold rolled wire. The roll-straightening process is a cold-forming process that uses rollers to provide uniform bending Of wire and/or rod material to change its shape and possible other characteristics for use in subsequent processing.
Grade density hardness t.R.S( mpa) application Yg6 14.9 91.0 hra 2350 Yg8 14.7 89.5 hra 2350 All raw material are tested in terms of density, hardness and t.R.S before use. There are strict inspection on process and final products. Every batch of product can be traced
