Polyimide tube is made of polyimide material using special molding. Polyimide exhibits outstanding mechanical, electrical and thermal characteristics. Compared to other polymers, polyimide can be made into insulation tubes with extremely short diameter and thin wall thickness. The minimum inside diameter of 0.1mm is available and the thinnest wall thickness of 0.015mm is producible. This product ensures superior thermal resistance, high voltage resistance, chemical corrosion resistance along with other capabilities such as outgassing, anti-nuclear radiation, and optimal flexibility for easier installation.
Polyimide Tube can be used in insulation of wiring or circuitry which in need of thermal resistance, voltage resistance, and in products in need of protection from corrosion, radiation. eg: a number of micro drives, heaters, small motors, circuit board testers, etc..
According to customer's requirement.
Polyimide tube is made of polyimide material using special molding. Polyimide exhibits outstanding mechanical, electrical and thermal characteristics. Compared to other polymers, polyimide can be made into insulation tubes with extremely short diameter and thin wall thickness. The minimum inside diameter of 0.1mm is available and the thinnest wall thickness of 0.015mm is producible. This product ensures superior thermal resistance, high voltage resistance, chemical corrosion resistance along with other capabilities such as outgassing, anti-nuclear radiation, and optimal flexibility for easier installation. Polyimide tube can be used in insulation of wiring or circuitry which in need of thermal resistance, voltage resistance, and in products in need of protection from corrosion, radiation. Eg: a number of micro drives, heaters, small motors, circuit board testers, etc. According to customer's requirement.
The most outstanding characteristics of Polyimide film is for its high temperature endurance and insulation ability. To make a polyimide film, first form the film by condensing pyromellitic dianhydride(PMDA)and Diamino diphenyl ether(DDE) in strong solvents, and then be treated by imine at a high temperature It exhibit excellent thermal resistance, high insulation resistance, engineering properties, chemical stability, radiation resistance, inflammability and fire resistance rated at 94V-0. The product is halogen-free, and meets the environmental protection standard for its heavy metal and other restricted organic materials. Electronic parts, mechanic components, insulation on electrics, insulation tube, composite insulators.
Polyimide Tape uses polyimide film as the backing material and is coated with silicone adhesive. It possesses excellent electrical insulation, dimensional stability, high temperature resistance, and leaves no defective gum when tearing off. This product can be used to masking Gold edge fingers and edge connectors during soldering and reflow soldering process within the PCB assembly industry. It is also used in electrical switches, motors, electronic transformers, relays, cables, coils, capacitors and electrical insulation applications meeting class H requirements in lithium battery.
The most outstanding characteristics of Polyimide film is for its high temperature endurance and insulation ability. To make a polyimide film, first form the film by condensing pyromellitic dianhydride(PMDA)and Diamino diphenyl ether(DDE) in strong solvents, and then be treated by imine at a high temperature It exhibit excellent thermal resistance, high insulation resistance, engineering properties, chemical stability, radiation resistance, inflammability and fire resistance rated at 94V-0. The product is halogen-free, and meets the environmental protection standard for its heavy metal and other restricted organic materials. According to customer's requirements.
Supplier: Insulation materials, kapton (polyimide tape), polyimide film, seamless polyimide tube, spiral wound polyimide tube, pet tape, ESD polyimide tape, pet screen protector
No.1 Introduction: Galvanized Spiral Gas Drainage Tube is adopted international advanced production equipments by our company. Its galvanized with the inner and outside. It includes jointing spiral tube and without-jointing spiral tube. It has the following advantages: smooth inner wall, little resistance, light in weight, corrosion-proof, long service life, low cost, etc, it is the ideal equipment of Gas Drainage Tube in coal mines. The jointing spiral tube is adopted cast steel flange connection, the automatic welding technics for the connection of tube body and flange. Comparing with riveting technics, the technics avoids the second scathe to the tube body, and also with better capability of gasproof. Due to the techniques of riveting with the misdistribution of joints, and the improper installation is easily leading to rips of tube. Aiming to the point, our company meets track with international technics and adopts integrated welding technics to avoid the existence problems of riveting. No.2 Usage: The product can be widely used in mine ventilation, gas drainage, and road and bridge construction, housing structure, discharging lampblack, draining contamination and basic equipment installation, etc. No.3 Product Advantages: ú¿1ú¬. Comparing with the traditional glass steel gas drainage tube and steel gas drainage tube, the mine-use galvanized spiral gas drainage tube has the following advantages: 1. Light of the pipeline in weight and easy to convey. 2. High-grade galvanized steel belts used and there is no use to consider of the burning blockage and electrostatic-proof problems. 3. Widely applicable diameter range from 80mm to 1600mm. 4. Spiral hinge mouth increases the loading power and pressure from the pipeline. 5. Inner wall of tube is smooth, little resistance and good circulation. 6. Galvanization prolongs service life. 7. Adopting cast steel flange connection, easily assembly and disassembly, with good interchangeability. (2) Advantages of Galvanized Spiral Tube for Air-conditioner: 1. Good match with other products and high standardization. 2. Good capability of airproof. 3. Low wastage of aeration. 4. Convenient project checking. 5. Pressure resistance is better than ordinary tube and rectangle tube. 6. Saving material. 7. Low cost installation. 8. Elegance of integrated overall arrangement. 9. Convenient daily maintenance.
(1) the spiral wound tube heat exchanger is highly efficient and saves energy (steam). Internal unique reverse winding spiral coil structure, heat exchange in a current way, make fully condensing steam in the heat exchange tube bundle, do not need a second heat exchange, so it can save a lot of steam; (2) spiral wound tube heat exchanger is stainless steel welding, it can bear high temperature and high pressure. Because the heat exchange tube bundle and shell are all made of stainless steel material, with uniform expansion coefficient, the maximum pressure is1.6 MPa, the highest heat-resistant is 400 â??,it will not cause deformation of the heat exchanger because of pressure and temperature; so there is no need to prepare the equipment to reduce the pressure and temperature. (3) its structure is compact, with small size, saving infrastructure investment; Lightweight and easy to install, the equipment can be connected directly to the pipe, reducing installation cost. (4) the heat exchanger with Michael's (OWEN) turbulent buffeting frequency standard principle, the heat exchange tube bundle adopts the minimum clearance design, effectively eliminates the turbulent chattering phenomenon, prolongs the service life of the heat exchanger. (5) the heat exchanger is low in scale with a low maintenance cost, with unique structure, unique surface treatment technology, and on both sides of the counterflow heat exchange medium, not only improving the integrated heat transfer coefficient but also with self-cleaning function and low scale tend. The method of chemical descaling can be used to clean the heat exchanger, which can save time, power, cost and effect.
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression. Metallic Gaskets: \"Metallic Gaskets\" are gaskets that are fabricated from one or a combination of metals to the desired shape and size. Common metallic gaskets are Spiral Wound Gaskets, Double Jacketed Metal Gaskets, Solid Metal Gaskets, Corrugated Metal Gaskets, Ring Type Joint Gasket used for heat exchangers, compressors, condensers, pumps, valves and turbines. These metallic gaskets are suitable for high pressure & temperature applications and require high bolt load to seal. Types: � Spiral Wound, Double Jacketed, Solid Metal gaskets, Corrugated Metal Jacketed Gaskets, Ring type joint Gaskets Non Metallic Gaskets: \"Non Metallic Gaskets\" or \"Soft Gaskets\" are gaskets that are easily compressed under a low bolt load. They are composite sheet materials that are suitable for a wide range of general as well as corrosive chemical applications. They are easily available either in sheet form or as gaskets that are cut accurately to any reasonable shape and size. Non metallic gaskets are usually manufactured from materials like arimid fiber, glass fiber, elastomers, teflon (PTFE), compressed asbestos fibre (CAF), flexible graphite etc. Types are: Non Asbestos, Asbestos, Flexible Graphite, PTFE, Viton, Silicone Rubber, Neoprene and Flange Gaskets.
Product Description: Extend Lines or Vacuum Bagging and Infusion Spiral Tubing is a resin infusion standard and is ideally suited for in-bag vacuum line extenders or resin feed lines. This tubing is often used in vacuum infusion to allow vacuum pressure to be easily dispersed around a part. To ensure resin flow is not impeded, we recommend wrapping tubing in nylon or polyester peel ply. Flexible vacuum infusion translucent plastic spiral tube for resin distribution of all types of thermosetting resins and for vacuum bagging processes. Resin infusion hose -- It is made of PE and used to provide a very free lowing channel through which the resin is distributed near the point where the resin is first fed into the composite. Spiral hose -- Resin flows freely through the center of the spiral tube, but just as easily out of the spirals in the side, allowing resin to be supplied all the way along an edge of the composite. Product Specifications: SW12: PE, ID9mm*OD12mm, 80 Celsius, 50m/rolls; SW12: PP, ID9mm*OD12mm, 120 Celsius, 50m/rolls; SW14: PE, ID11mm*OD14mm, 80 Celsius, 50m/rolls; SW14: PP, ID11mm*OD14mm, 120 Celsius, 50m/rolls; SW16: PE, ID13mm*OD16mm, 80 Celsius, 50m/rolls; SW16: PP, ID13mm*OD16mm, 120 Celsius, 50m/rolls; Product Features: *Low material cost. *PE material, strong tube wall makes the spiral tube not deformed under atmospheric pressure. Packaging Information: PE bag or carton Storage Method: Stored in a cool and dry place, and make sure not directly touch the ground or wall to avoid moisture. Do not remove the original packaging when store. Scenes To Be Used: Used in vacuum infusion and prepreg process.
