Polyimide Tape (Kapton)

Kapton tape Kapton tapes are polyimide polymers in the form of a film. Kapton polyimide tapes are also known as high temperature tape or polyimide tape. Some of the characteristics of the kapton polyimide tape are: It maintains an excellent physical and electrical properties over a wide range of temperature from -269ªc (-452ªf) to as high as 260ªc (500ªf) It has excellent chemical and radiation resistance Standard adhesive type is silicon Kapton polyimide tape can be used: As mask in the electronic assembly As insulation for traction motor in the automotive industry As bar code labels on the pcb processed through wave soldering In flexible circuitry In nuclear reactors and outer space Our polyimide tapes are made in the p.R china. Kapton tapes are produced in 1, 2 and 5 mil thickness. Low static products are primarily used in the electronic assembly where static charge is a problem. Kapton is a registered trademark of dupont

Description: HN Polyimide Film has the excellent balance of electrical, thermal, mechanical, physical, and chemical properties over a wide range of temperatures as low as C269C and as high as 400C. Application: HN Polyimide Film can be used in a variety of electrical and electronic insulation applications: wire and cable tapes, formed coil insulation, substrates for flexible printed circuits (FPC), motor slot liners, magnet wire insulation, transformer and capacitor insulation, magnetic and pressure-sensitive tapes, and tubing. Size: Film Thickness: 0.013mm, 0.025mm, 0.040mm 0.05mm, 0.075mm, 0.100mm, 0.125mm, 0.150mm, 0.175mm, 0.200, 0.225mm. Film Width: 6mm to 1040mm Special thickness or width can be supplied according to customer. Rolls: 3 inch Core, max.width 1040mm Tapes: from 6mm width upwards Packing: approx.28kgs per roll in carton. Special size can be supplied according to customer.

Polyimide tape use polyimide film as a substrate and coated on high performance silicone pressure sensitive adhesive. Excellent shear resistance, excellent heat resistance, excellent chemical staility, radiation resistance, solvent resistance and easy for die cut. Suitable for electronic circuit board wave soldering masking, electrical insulation and high-end finger protection, motor insulation, as well as lithium battery positive and negative and ears fixed. Now it is widely used in aviation, marine, spacecraft, missile, rockets, atomic energy, electrical and electronic industry, etc.

Supplier: Polyimide film, fep film, kapton, polyimide tape

Color: Amber Backing :Polyimide film Adhesive: Silicone Popular thickness:60mic (50mic,80mic) Width:12mm/18mm/19mm/24mm/36mm/48mm... Length:33m Initial Adhesive :#10 180 Peel adhesion: 4(N/In) Temperature: 260 (30mins) Main Application:PCB Soldering Welding Repai, 3D Printer

Supplier: High temp tapes, such as polyimide/kapton tape, polyester powder caoting tape, copper foil tape

Supplier: Pi Film Kapton Polyimide Silicone Tape

Corona resistance polyimide films ,not only with ordinary polyimide film electrical properties, good heat resistance and resistance chemicals, but also with the super corona resistance and good thermal conductivity performance, mainly apply to sintering electromagnetic winding wire ,traction motor, wind generators, and the special motor turn-to-turn insulation and heat insulation, the heat resistance level is a class C. The technical requirements: 1. Type CR type: Corona resistance polyimide film without any coating FCR type: Corona resistance polyimide film with F46 single side coating FCRF type: Corona resistance polyimide film with F46 double side coating 2. Appearance its appearance is golden brown, translucent, the surface is bright and clean, no wrinkles, tear, particles, bubble, pinhole and foreign material defects. Its edge is tidy, and without damage. 3. Thickness and allowable deviation Model CR type FCR type FCRF type Thickness(um) 25 38 50 Allowable deviation(um) 2 3 3 Note: coating thickness may be based on customer demand in 5 ~ 12.5 um range regulation. 4. Width and allowable deviation Width may cut according to the customer request within 600 -1050 mm. Each volume length is for 500-1000 m; Each volume joints for final product are not more than three, the proportion of volumes with joints vs the total volumes number in the one order is not more than 25%,the shortest length is more than 300 m; Single plate or roll products joint numbers are not more than three, the shortest length is more than 300 m. FCR type and FCRF type using thermal bonding lap. 5. Film marks: -Every single volume label marked: batch number, specification, net weight;Every single plate or roll labeling: specification. -Package should have obvious and firm mark; -The format of the packing cases is confirmed by purchase order related terms. Serial Number Type CR FCR FCRF 1 Corona resistance life (h) 1 KV voltage, frequency 20 KHz temperature 90 2 pulse rise time 400 ns Y80 Y80 Y80 2 Industrial frequency electric intensity (v/um) Y200 Y120 Y100 3 Surface resistivity 1X1014 1X1014 1X1014 4 Volume resistivity 1 1X1010 1X1010 1X1010 5 Relative permittivity (48-62 Hz ac) 3.2 0.4 3.2 0.4 3.2 0.4 6 Dielectric power factor (48-62 Hz ac) 13.5X10-3 13.5X10-3 13.5X10-3 7 Tensile strength (Mpa) : Y135 Y80 Y80 8 Elongation at break (%) Y40 Y40 Y40. 1. Testing method: According to the ICE62068-1-2003/ GB /T13542.6-2006 "electrical insulation, part 6," Polyimide film for electrical insulation regulation experimental method. 2. Film packaging: Film roll with plastic film packaging, outer with shockproof foam cushion packaging, and support in place in the package overhead, make the film in the transportation conditions often get fully protected without damage, each volume end article sticker marking. 3. Dust is strictly prohibited in the packing box internal. 4. Film should be stored in a dry and clean indoor, film roll to be supported in the box, placed suspended and not be erected. It should not be close to the fire, central heating or exposed to direct sunlight. 5. Products should avoid damp and mechanical damage in the storage and transport. 6. Film storage period is for two years after COA issued date. Expired films are still available after again qualified according to the product standards inspection.

Standard number: 2006 GB/T13542.6-2006 Application range: The polyimide film is to be produced by cast method, which has High temperature resistance, resistance to radiation and excellent dielectric properties, applicable to electrical insulating of the class H electric motor and other electrical equipments , and other use electrical insulating materials. A. Technical requirements 1. Appearance: Film surface is bright and clean, not due, tear, particle, bubbles, Pinhole and foreign material defects ;Edge is tidy, without damage; Films supply in rolls. 2. Size 2.1. Thickness and allowable deviation: The standard thickness(um) 12.5 25 40 50 75 100 125 175 200 The allowable deviation(um) +1 +2 +2 +2 +3 +4 +4 +5 +5 -1 -1 -2 -2 -3 -3 -4 -5 -5 Note: Supplying according to customer request with thickness 12.5-22.5 um, allowable deviation can be negotiated by both sides. 2.2. Width: no less than 250 mm, deviation +/-1.6mm. According to the needs of the users, tape can be cut with different specifications. 2.3. Length: Supplying according to the requirement of customer. 2.4. Performance requirements Serial number Index name Unit Index 25um 40um 50um 75um 100um 1 density Kg/m3 1425 10 2 tensile strength horizontally Mpa Y165 vertically 3 elongations horizontally and vertically % Y40 Y50 4 shrinkage rate horizontally and vertically 150 400 % 0.35 2.5 5 industrial frequency electric strength 48H2 62H2 v/um Y240 Y200 Y180 Y160 6 surface resistance,200 Y1.0X1014 7 Volume resistance,200 M Y1.0X1010 8 Relative permittivity 48 62Hz - 3.5 0.4 9 dielectric power factor 48 62Hz - 4.0X103 10 long-term heat resistance temperature index - Y180. 1. Film should be wrapped in a tube on core and supply in rolls; Each volume in a plastic bag packing and seal, placing in dry and clean case 2. Each box packaging should specify model or type, product name, specification, batch number, gross weight, net weight, manufacturing date, manufacture ¡¥s name, and product test report. At the same time, marked "Moisture proof" "Prevent Impact" and other words in packing body. 3.Film should be stored in a dry and clean indoor, from the date of original shipment, shelf life for two years, more than storage life according to the standard check again, qualified can still use. 4. In storage and transport process, should avoid damp and mechanical damage.